介绍了TPP的消泡机理及其应用。
相容性好，有效消泡，通用型。
Universal defoamer. Compatibility of good effective anti-foaming.
其消泡作用受温度变化的影响小。
Defoaming effect is less influenced by the change of temperature.
并对制糖业中的消泡机理进行了论述。
Meanwhile, some mechanisms of defoaming in refine sugar were related here.
研究开发了板式塔降液管机械消泡板组件。
A new structural component settled in the downcomer of tray column for mechanical defoaming was developed.
优异的消泡性，对密封垫及橡胶管无不良影响。
Merit of the defoaming, the rubber gaskets and without adverse effects.
产品具有高透明性、优异的消泡性和重复粘贴性。
This product has high transparence, excellent defoaming capability and repeated adhesive ability.
结果显示聚醚改性有机硅消泡剂具有良好的消泡性能。
It has shown that this polyether modified polysiloxane defoamer provides good defoaming effect.
讨论了由发泡和消泡曲线计算平均发泡寿命的方法。
Then the method of calculate of the average foam lifetime with foam and rupture curves was discussed in details.
研究了磷酸三苯酯(TPP)在乳胶漆中的消泡作用。
The effect of triphenyl phosphate (TPP) as a defoamer in latex paint was studied.
该塔板是在普通塔板上放置一种特制的新型机械消泡构件。
A new type of tray for mechanical defoaming is developed, which has a new structural component for mechanical defoaming placed over it.
研究有机硅型消泡剂各组分在消泡及抑泡方面的协同效应。
The cooperative effect of organo silicone defoamer components is researched.
通常以一定角度移动的喷淋进行消泡，如摆动头箱喷淋器。
Showers, which usually oscillate over a limited angle, kill any foam.
讨论了有机硅消泡剂的消泡机理，详尽阐述了其特性和用途。
This paper discusses defoaming mechanism of Organosilicon defoamer, and elaborates its features and uses.
浅析了常规消泡的方法与效果，描述了风机消泡的实际设计方案。
The conventional defoaming methods and their effect are analyzed and the practical design proposal of the blower fan defoaming is described.
考察了消泡剂的表面张力，对消泡剂的消泡机理做了初步的探讨。
The surface tension of the desulfurizer solution and its desulfuring mechanism were researched.
本发明消泡力强，抑泡时间长，用量虽少但效果优于其它的消泡剂。
The defoaming agent of the present invention has great defoaming capacity and long foam-inhibiting period.
通过实验，成功地找到了在塔板上设置机械构件来实现消泡的有效方法。
An effective method of putting mechanical components to implement bubble-removing in the sieve tray is found by experiments.
从理论上分析了消泡剂的消泡原理，概述了消泡剂的选用原则及评价方法。
The antifoaming principles of antifoaming agents were analyzed in theory, and the selection principles and evaluation methods were described.
经小试、中试研究结果表明：合成的工艺条件稳定，产品具有优良的消泡性能。
The results of lab and pilot experiments show that the synthesis process is very stable and defoaming property of the product is very good.
针对原消泡系统存在的问题，采用气、水雾消泡技术，对消泡系统进行了改造。
According to the problems existing in the old anti-foam system of the cleaning section, the old system is revamped by using the air and spray anti-foam technology.
前言： 目的：制定妇炎消泡腾栓的制备工艺及质量标准，并观察其临床疗效。
Objective:To work out preparation technology and quality specification of Fuyanxiao Effervescent Suppositories, and to observe its clinical curative effect.
产品加入铜粉后充分搅拌20分钟，应保证油漆黏度均匀，静置30分钟消泡。
Stir completely about 20 minutes after add copper powder to the product, ensure the paint's viscosity uniformity, leave it for 30 minutes to let the bubbles disappear.
结果表明，所得涂膜附着力强、防锈性能好，储存稳定性及消泡等性能明显改善。
The results show that the obtained coatings are adhesive, antirust and have improved storage stability and antifoam property.
在完成上述实验之后，测试了不同消泡构件对降低易起泡物系泡沫层高度的效果。
After the experiments are finished, the effects of the different bubble-removing components to reduce the foam height of the frothing system are measured.
该消泡剂既有快速的破泡性，又有良好的抑泡性，消泡后水相体系保持原体系状态。
The defoamer not only can break foam rapidly, but also restrain foam forming effectively. Water phase system still keeps in its original condition after defoaming.
本文阐述了有机硅消泡剂的消泡原理以及用作消泡剂主体材料的二甲基硅油的特性。
The paper elaborated the principle of organ silicon defoamer and the properties of dimethyl silicon oil which was used as the main materials of organ silicon defoamer.
消泡效率高，能有效地提高泥浆的润滑性能和冷却效果，大大提高泥浆循环使用效率。
High efficiency of defoaming, improve effectively lubrification and cooling effect of the slop, and highly improve the cycled use effect of the slop.
通过对水性木器漆的配方调整和消泡工艺优化，解决了产品生产和使用中的消泡问题。
Through analysis and adjustment formulation and optimization of defoaming technique of waterborne wood coatings, the defoaming problem of product was solved successfully.
通过对水性木器漆的配方调整和消泡工艺优化，解决了产品生产和使用中的消泡问题。
Through analysis and adjustment formulation and optimization of defoaming technique of waterborne wood coatings, the defoaming problem of product was solved successfully.
应用推荐