用两台泵分别使浸渍液和浸后液循环。
Two pumps are used to circulate the fresh and used impregnating liquids separately.
提出用一氧化二氮乙炔火焰原子吸收光谱法测定镉镍电池浸渍液中硅含量。
The application of nitrous oxide-ethyne flame ato mic absorbing spectral method to measure the content of silicon in Cd-Ni batteries impregnating solution is studied.
提出用空气乙炔原子吸收光谱法进行电化学浸渍液乙醇溶液中镍含量的测定。
The air acetylene atomic absorption spectrometry is used for measuring the nickel content in hydrogen battery electrochemistry impregnate ethanol solution.
毒力测定结果表明，附子浸渍液对银纹夜蛾具有较高的毒性，Lc50为原液稀释5。
The toxicity test shows that the aconitic steep has high toxicity against Plusia agnata, LC50 being 5.
本文阐述和讨论了前处理及浸渍液对织物印花质量和反应性染料在织物上固着率的影响。
The influence of fabric pre treatment and impregnation liquor on printing quality and fixation rate of reactive dyes will be presented and discussed here.
分别将各组材料的浸渍液与第五代人牙髓细胞共同培养，以MTT法评价材料的细胞毒性。
MTT method is used to evaluate the cytotoxicity of dental materials on human pulp cells.
讨论了浸渍胶液种类、抗静电剂用量、浸渍液固含量和泡沫体密度对抗静电泡沫性能的影响。
The effects of impregnant kind, the dosage of antistatic agent, solid content and the viscosity of the impregnant, and foam density on the antistatic property of the polyurethane foams were discussed.
研究表明家畜沤肥浸渍液对青椒枯萎病具有显著防治效果，其中猪粪沤肥浸渍液在温室盆栽的防治效果为88。
In pot test in green house, the treatment of compost extract from pig manure reached a relative efficacy of 88.
考察了浸渍方法、不同浸渍液、贵金属含量、还原温度、载体的预处理等因素对对氯硝基苯加氢还原反应的影响。
The effect of impregnation method, impregnation solutions, loading content of Pt, reduction temperature and the carbon pre-treatment on the activity was discussed.
同时，我们还考察了合成条件、焙烧温度、焙烧时间、磁性基质加入量、浸渍液浓度对磁性固体超强酸催化剂性质的影响。
At the same time, we studied the influences of the preparation condition, baking temperature, baking time, adding amount of magnetic materials, consistency of impregnating solution on it.
该装置包括棉条喂入装置、碱液浸渍装置、丝光装置、水洗和烘干装置。
The device includes sliver feeding device, alkali impregnating device, mercerizing device, rinsing and drying device.
如果制动衬片被油或制动液浸渍，就会失去作用，必须用力踩踏板才能使制动起作用。
If the brake linings are soaked with oil or brake fluid, they will not hold well, and excessive pedal pressure is required for braking action.
该方法采用中间体悬浮液浸渍玻璃纤维，烘干，熔融状态下拉挤成棒型，切粒，注射成型。
The LGF was dipped into suspending intermediate, dryed, molten to draw- extruded to be bar, pelleted and molded.
实验结果表明，三种硼改性方法中以溶液浸渍和胶液涂层两种方法处理效果比较好，其中胶液涂层法更适合连续化生产的要求。
It was found that the soaking and coating of three methods achieve good results, and the method of coating is more fit in with the needs of the process of the continuous production.
将具有细胞组织结构的含有多种可溶性成分的果蔬原料浸渍于渗透液中，会引起多组分物质迁移，原料渗透脱水。
When cellular biological materials are immersed in osmotic solution, multi-component mass transfer occurs, which ultimately leads to the loss of water from the food, or osmotic dehydration.
以鸡蛋壳内膜为模板，通过简单环保的液相浸渍技术结合热处理工艺制备了具有蛋膜分级结构特征的WO3纳米材料。
The WO3 material with interwoven meshwork conformation was successfully prepared using eggshell membrane as template by an aqueous soakage technique followed by calcination treatment.
介绍了液相浸渍炭纤维坯体的两种方法。
Two Methods: Used to liquid impregnate carbon fiber preform are introduced.
介绍了液相浸渍炭纤维坯体的两种方法。
Two methods used to liquid impregnate carbon fiber preform are introduced.
浸液槽中可加入水分和营养液，对种植绳进行浸渍。
The soaking tanks may be filled with water and nutritious liquid for soaking the planting rope.
醋用作腌渍鱼、肉、水果和蔬菜，可制成浸渍调味液、调料和其它调味汁。
Vinegar is used in pickling meat, fish, fruits, and vegetables and in creating marinades, dressings, and other sauces.
采用溶胶-凝胶方法制备WO3前驱液，利用浸渍-提拉法使其成膜。
WO3 precursor solution was prepared by Sol-gel method. The films were printed by dip-coating method.
结果：壳聚糖吸附碘量与浸液中的碘浓度，浸渍时间和固液比有关。
RESULTS: the amount of adsorbed iodine onto chitosan was related to the concentration of iodine, the immersing time and the solid to liquid ratio.
以及相关行业的香烟滤嘴、木地板防潮、吸味、汽车汽油蒸发污染控制，各种浸渍剂液的制备等。
And related industry cigarette filter, wood floor moisture absorption, flavour, automobile gasoline evaporation pollution control, various of impregnant liquid preparation etc.
利用液相浸渍法制备了含有难熔金属化合物的C/C复合材料，通过金相显微镜、面扫描观察了难熔金属颗粒在材料中的分散状态；
C/C composites with refractory metal compounds were prepared by liquid impregnation, the distribution state of refractory metal grain was observed by optical microscope and surface scan.
研究了液相浸渍及化学气相法致密工艺对二维炭炭（2DC C）复合材料力学性能的影响，尤其是对层间剪切强度（ILSS）的影响。
Influence of CVD and LIC densification processes on mechanical properties, especially interlaminate shear strength(ILSS) of carbon cloth reinforced 2D C/C composites is studied.
根据鲐鱼加工特性，采用去皮，复合盐液漂洗、压榨、雪菜汁浸渍等工序连续脱脂。
The chub mackerel filets were degreased by skinning, bleaching with complex salt solution, pressing and bleaching with potherb mustard juice successively.
研究了在不同制膜液浓度及不同浸渍次数的条件下，葡萄糖传感器的响应性能。
Under the conditions of different polyurethane concentration and dip times, responses of glucose sensors were studied.
以糖液可溶性固形物含量为指标，研究了糖液种类、浓度、温度和浸渍时间对气流膨化苹果脆片品质的影响。
Quality of strawberry chips produced by explosion-puffing drying technology is effected by slice thickness, moisture content, operation temperature and pressure difference.
以糖液可溶性固形物含量为指标，研究了糖液种类、浓度、温度和浸渍时间对气流膨化苹果脆片品质的影响。
Quality of strawberry chips produced by explosion-puffing drying technology is effected by slice thickness, moisture content, operation temperature and pressure difference.
应用推荐