算例表明所提出的方法适用于注塑模浇口位置优化,并且有较好的计算效率和精度。
Numerical examples show that the method is suitable for designing optimal gate location and gives high efficiency and accuracy.
浇口设计要设定浇口的位置和形状。
The gate design will set the location and the shape of the gates.
浇口的速度是否影响模具的温度?
Does the gate velocity of the metal influence the die temperature?
浇口余料过大,很难用刀去除干净。
浇口切除后只留下细小痕迹。
这样就设定了浇口设计目标。
第四步确定流型和浇口位置。
采用矩形侧浇口、齿轮齿条脱螺纹机构。
Rectangle-shape side gate and the gear-rack taking off thread mechanism were used.
提出了一个分析浇口位置对熔接痕影响的方法。
This paper presents a method to explore the implications of gate location on weld lines.
对透明塑料罩壳注射模结构,采用点浇口进料。
For the injection mold structure of transparent plastic cover shell, point gate feeding is adopted.
靠近浇口和冷端的位置,试样的晶粒有所细化。
The grain of the sample was refined near the runner bush and the cold-end.
模具浇口加工简单;
浇道和浇口系统的设计必须能减少紊流的可能性。
The runner and gate system must be designed to reduce the possibility of turbulence.
浇注系统的平衡最终通过调整浇口的尺寸来达到。
Balance in the feed system is ultimately attained by adjustment of gate size.
开口内采用适当的浇口是避开融接线的唯一途径。
Proper gating in this slot area was the only way to avoid weld lines.
铸造过程中不再需要浇口和冒口也是其一大优点。
介绍了注射模结构,浇口设计方案和模具工作过程。
The structure of the injection mould, the design plan of the gate and the working course of the mould are introduced.
该模具采用热流道针阀式点浇口进料,无流道废料;
The mould is designed to take advantage of hot runner with the needle-valve type of pin-point gate, having no runner scraps.
适用于注塑、吹塑过程中产生的浇口及残次品的粉碎。
F series is specially designed for crushing all kinds of sprues, scraps, stalks and rejects during operation of injection or blow molding.
适用于注塑、吹塑过程中产生的浇口及残次品的粉碎。
FD series is specially designed for crushing all kinds of sprues, scraps, stalks and rejects during operation of injection or blow molding.
分析了浇口尺寸的重要性,指出浇口尺寸要容易修正。
It analyzed the importance of gate dimension and pointed out that the gate size must be easy to revise.
采用侧浇口。
使用了倾斜浇口套,详细介绍了该模具的注射工艺条件。
Slanting gate cover is used, and the injection process conditions of this mold are introduced in details.
三板模;点浇口;模外定距分型;定模限位顶出;模具结构。
Three-plate mold; Pointed gate; Mold ranging parting; Restricted ejector of fixed-die; Mold structure.
产品是平板件,很容易变形。我们需要找到一个合适的浇口位置;
The part is flat, easy to be deformed. We need to find a suitable gate location.
预测可能存在的熔接痕位置及锁模力的大小,确定最佳浇口位置。
In order to obtain the best gate location addition, the position of weld lines and the clamp force were forecasted.
针对一种圆筒形制品,设计了一种结构简单的点浇口成型模具结构。
In terms of a circular plastic product, a simple pin point gate mould was designed.
开发横浇道系统的形状,它必须支持在第五步中开发出的浇口设计。
Develop the shape of the runner system, which must support the gate design developed in step 5.
采用面向对象的数据库技术,建造了浇口类型与浇口位置咨询专家系统。
A consultation expert system about the gate's type and location is built by the method of Object-Oriented database technology.
采用面向对象的数据库技术,建造了浇口类型与浇口位置咨询专家系统。
A consultation expert system about the gate's type and location is built by the method of Object-Oriented database technology.
应用推荐