抽齿规律是螺旋钢球活齿传动的基本规律之一。
Theorem of choosing teeth is one of basic rules of designing screw steel ball moving teeth driver.
本文对外波式活齿减速器波形轮应力场进行了研究。
This paper studies the stress field of external. wave sliding-tooth reducer's wave wheel.
研究推导了外波式活齿减速器中接触强度的计算公式。
This paper investigates the contact fatigue strength comparison of laser-hardened gear and (carburized) gear.
其原理和方法也适用于其它各种活齿传动系统的模糊故障树分析。
The principle and the method in this paper is suitable for the fuzzy fault tree analysis of any other movable teeth transmission system.
推导出了活齿端面谐波齿轮各啮合副经过齿面修形后的齿面方程。
The equations of teeth surface after modification of all key components, such as wave producer, oscillating teeth, end face gear, are deduced.
导出摆动活齿传动空回行程不自锁条件，并给出克服自锁的方案。
Self-locking conditions of return stroke of swing movable teeth are deduced and methods to overcome self-locking are obtained.
利用摆动活齿传动等效机构，分析其传动性能和最小传动角的位置。
According to its equivalent mechanism-crank rocker mechanism, driving performance and minimum driving Angle position of movable tooth is analyzed.
本文建立了摆动活齿传动的优化设计数学模型，提出了优化设计方法。
The mathematical model of optimization design for swing movable teeth drives is set, and the optimization design method is proposed in this paper.
空间凸轮活齿精密传动属于空间多齿啮合传动，其设计计算较为复杂。
Because the spatial CAM sliding tooth precision transmission belongs to the spatial multi-tooth meshing transmission, the design and calculation are more complicated.
研究了活齿传动齿形综合正解的问题及与此相关的活齿相对运动规律。
The problem of direct solution to tooth-profile synthesis for sliding-teeth transmission and law of relative movement of sliding-teeth are studied in this paper.
应用矩阵迭代摄动法，对摆动活齿传动系统的固有频率进行了求解和分析。
The natural frequencies of the vibration system are obtained by using the iterative perturbation method.
对得到的摆动活齿相对角速度和角加速度变化曲线，分别进行了研究分析。
Angular velocity and acceleration variation curve of swing movable teeth are plotted and their variation rules are analyzed.
在此基础上导出了活齿与激波器、活齿与内齿轮啮合处的接触强度的公式；
Based on it, the formulae of contact strength of mesh points between the movable teeth and the surge wheel, the movable teeth and the internal gear are derived.
应用矩阵迭代摄动法，对摆动活齿传动系统的固有频率进行了求解和分析。
The natural frequencies of the vibration system are obtained by using the iterative perturbation me…
建立了摆动活齿传动的双目标模糊可靠性优化设计数学模型：并给出了计算实例。
The mathematical model of two-objective fuzzy reliability optimization design for swing movable teeth drive is put forward. A numerical example is given.
新型摆线凸轮活齿传动是一种内齿轮齿廓为摆线及其等距线的二齿差活齿行星传动。
The new cycloid cam sliding tooth transmission is a two-teeth difference sliding tooth planetary gearing with cycloid internal gear.
散齿端面谐波齿轮传动是一种实用的新型传动方式，属于一种空间的活齿传动结构。
A face harmonic motion drive of separate tooth is a new form of utility model drive. It belongs to a structure of space active teeth drive.
针对摆动活齿减速器的结构特点，提出了摆动活齿减速器的有限元模型的建模方法。
A method of building the finite element model of swing movable teeth reducer was put forward according to the characteristics of the construction of swing movable teeth reducer.
全滚动活齿传动是一种新型传动，其基本参数对传动的技术经济效果具有重要作用。
The basic parameters of oscillatory roller transmission play an important effect on transmission technology and economy.
这些概念和公式为进一步研究活齿减速器，提高传动效率等有关问题提供了理论依据。
The concept and formulas provides a theoretical basis for the related problems of further research of raising the transmission efficiency of the sliding tooth speed reducer.
用模糊数表示活齿传动中各事件发生的概率，对摆动活齿传动系统进行了模糊故障树分析。
The probability of event occurrence in a movable teeth drive is described by fuzzy number. The fuzzy fault tree analysis of a swing movable teeth transmission system is conducted.
用模糊数表示活齿传动中各事件发生的概率，对摆动活齿传动系统进行了模糊故障树分析。
The probability of event occurrence in a movable teeth drive is described by fuzzy number. The fuzzy fault tree analysis of a swing movab…
滚子活齿传动设计中，在工作应力、许用应力的设计参数和影响因素中存在着许多不确定性。
The many indefinite exists in the design parameters and influence factors of the working stress and allowable stress of the roller movable teeth drive.
论述波式滚动活齿传动内齿轮齿廓曲线的两种选择：内摆线的等距曲线、密切圆弧曲线的理论成因。
The text introduces the two choices of inner gear profile curve of the rolling gear drive and the theoretical reasons of the equidistance curve of inner cycloid and the close an; curve.
但对于基本参数的优化设计至今尚未见报导，本文对全滚动活齿传动的计算机辅助优化设计作了初步探讨。
But the optimizing design about basic parameters still has not been seen as yet, the disquisition pilot study on the computer assisted optimization design of Oscillatory Roller Transmission.
首次提出了一种活齿端面谐波齿轮传动装置 ，介绍了这种新型谐波齿轮传动装置的传动原理和传动比的计算方法。
The end face harmonious gear drive of oscillating teeth is a new type of driving device, which combines the advantages of the common harmonic gear drive and the oscillating tooth drive.
首次提出了一种活齿端面谐波齿轮传动装置 ，介绍了这种新型谐波齿轮传动装置的传动原理和传动比的计算方法。
The end face harmonious gear drive of oscillating teeth is an invention that contains the advantages of the common harmonic gear drive and the oscillating tooth.
本文从啮合理论、运动学、可靠性分析、优化设计、加工制造及性能测试等方面对摆动活齿传动进行了一系列系统、深入的研究。
This paper carries on a series of in-depth and systemic theoretical study on engagement theory, kinematics, reliability theory, optimization design and manufacturing process.
研究了活齿端面谐波齿轮各啮合副齿面修形的原则，得出了波发生器、活齿前后端和端面齿轮齿面的修形高度之间必须满足的关系。
The modification principle of tooth surface is deduced, and it draws the conclusion that the modificative tooth depth of wave producer, end face gear and oscillating teeth have certain relation.
研究了活齿端面谐波齿轮各啮合副齿面修形的原则，得出了波发生器、活齿前后端和端面齿轮齿面的修形高度之间必须满足的关系。
The modification principle of tooth surface is deduced, and it draws the conclusion that the modificative tooth depth of wave producer, end face gear and oscillating teeth have certain relation.
应用推荐