直接凝固注模成型(DCC)是一种全新概念的净尺寸陶瓷成型技术。
Direct coagulation casting (DCC) is a novel ceramic net shape forming process for ceramic green bodies.
在陶瓷材料先进成型技术中，凝胶注模成型是制备大尺寸、复杂形状坯体的一种有效方法。
Gelcasting is one of the most promising methods among all the advanced ceramic forming techniques.
凝胶注模成型技术是一种近净尺寸陶瓷成型技术，它为解决陶瓷材料的加工成型问题提供了一条十分有效的工艺途径。
Gelcasting is a novel and near net-shape forming technique for ceramics, which has provided an effective approach for resolving difficulties of machining and forming for ceramics.
提出了多相复合陶瓷胶态注模原位凝固成型新工艺。
A new forming technology on the colloidal casting and in situ coagulation of the multiphase composite ceramics is presented.
提出了多相复合陶瓷胶态注模原位凝固成型新工艺。
A new forming technology on the colloidal casting and in situ coagulation of the multiphase composite ceramics...
直接凝固注模成型是一种崭新的净尺寸陶瓷成型概念。
Direct coagulation Casting (DCC) is a novel near net shape process concept for ceramic Materials.
可通过模制制备及形成所述镜片，所述模制包括注模法或半注模法。
Lens can be prepared and formed by molding including a cast molding process or a half cast molding process.
全注模的设计使计量表不能从密封条中移出，从而防止加注流体的流失。
Due to the all molded design, the gauge cannot be removed from the seal thus preventing loss of fill.
随固相体积分数的增加，水基凝胶注模法坯体密度逐渐增加，但强度逐渐降低。
With increasing solid loading, density of AGC green body increases gradually, but strength decreases gradually.
采用一种新型的真空凝胶注模成型法，减少了在凝胶注模成型时坯体中形成的气泡。
A new vacuum gel-casting was applied to ceramics which could reduce the air bubbles formed during the casting in the green body.
这个标准涵盖用于注模和挤压成形的PP(聚丙烯)塑料材料的聚合体含量和物理性能。
This standard covers the polymeric content and physical characteristics of PP (polypropylene) plastic materials for injection molding and extrusion.
本文用改性淀粉原位凝胶注模成型技术制备了具有较高强度和均匀性良好的氧化铝陶瓷坯体。
To achieve in-situ consolidation forming of Al_2O_3 ceramics, the gel network formed by swelling and gelatinization of the modified starch when heated was used in this study.
结果表明，影响凝胶注模陶瓷坯片密度的因素主要有：料浆的固含量、单体含量、单体和胶联剂的比值。
The research showed that the solid loading, content of monomer and ratio of monomer and crossing linker were the main effect factors on the density.
为一个注模零件制作的复杂模型可能包含上千个特征，修改早先建立的特征可能导致后续特征创建失败。
A complicated model for an injection molded part may have a thousand features, and modifying an early feature may cause later features to fail.
采用低毒的N羟甲基丙烯酰胺体系凝胶注模成型氧化铝陶瓷，研究了该体系下浓悬浮体的制备及固化过程。
The alumina ceramics is gel-mould cast with low toxic N methylolacrylamide system. This paper reports the investigation on the preparation of alumina suspension and its solidification process.
西帕在市场中占据着独特的地位，因为她是唯一一家能同时提供一步法和两步法解决方案的制造商，而且还可以提供适用于西帕设备和非西帕设备的注模和吹模。
SIPA has held a unique position in the market as the sole manufacturer supplying both 1-step and 2-step solutions as well as injection and blowing molds for SIPA and non SIPA machines.
SHELLCV程序包含三角形壳元和矩形壳元两种单元，可以模拟复杂形状三维薄壁构件的RTM制造工艺注模过程，得到任意时刻的树脂流动前峰曲线、压力场分布。
SHELLCV can simulate the process of mould-filling in RTM for the 3d complex shape thin parts and predict the resin flow front advancement and the distribution of pressure field at any instant in time.
介绍了注胶桶的注胶嘴注射模的设计制造方法，并阐述了该模具的工作过程。
Introduced design and manufacture methods of injection mold of injection nozzles for plastic buckets, described the mold working process.
介绍了用注塑机改装的注吹一次成型全自动吹瓶机回转模部件结构设计。
The design of the assembly structure of the revolving mould used on the fully automatic bottle_blowing machine that was reformed from an injection machine was introduced.
定期清洁机台表面、底板及下模滑板、沟槽、上模内压板及保险杆(注：必须关闭电源并恢复常温)。
Clean the machine including the surface, base, slip board, groove, pressed board and oriented pole in the fixed time. (turn off the power until the machine to normal temperature).
定期清洁机台表面、底板及下模滑板、沟槽、上模内压板及保险杆(注：必须关闭电源并恢复常温)。
Clean the machine including the surface, base, slip board, groove, pressed board and oriented pole in the fixed time. (turn off the power until the machine to normal temperature).
应用推荐