污泥负荷与胞外聚合物浓度呈负相关；
Mass loading is negative correlation with extracellular polymers (EPS) concentration.
污泥表观产率系数随污泥负荷的增加而增大；
The sludge yield coefficient increased with the increase of sludge loading rates.
试验结果表明，污泥负荷的确定应根据温度和脱氮要求；
The results show that the sludge loading can be determined preferably according to the temperature and denitrification demand.
该设计方法引入了“进水期污泥负荷”和“反应期污泥负荷”两个概念。
The design method was implying the new concept of Loading Rate both on fill phase and react phase.
该设计方法引入了“进水期污泥负荷”和“反应期污泥负荷”两个概念。
Two concepts namely sludge load with wastewater inlet and sludge load in reaction period are introduced f...
最佳污泥负荷下的污泥沉降性能良好，污泥负荷过高会导致非丝状菌污泥膨胀。
The sludge also shows good settleability at the optimum sludge load, and the higher load will lead to non-filamentous bacteria sludge bulking.
本文考察了不同的污泥负荷、曝气型式、反应时间、充水历时等条件对处理效果的影响。
The effects of different sludge load, aeration way, reaction time and influent time on treating coking sewage were studied.
考察了不同双酚a污泥负荷对双酚a去除的影响，以及污泥吸附和生物降解对去除的贡献。
The effect of the BPA-sludge loadings on the BPA removal was investigated, and the contributions of sludge adsorption and biodegradation to removal were analysed.
试验结果表明，HCR具有充氧效率高、启动速度快、污泥负荷高和抗冲击负荷能力强等特点。
The experimental results showed that HCR had high oxygen transfer rate, quick start up ability, high sludge loading and great buffering capacity.
这为工艺运行中及时、合理地调整COD -污泥负荷来提高系统脱氮效果提供了一条新途径。
The model supplies a new way to change COD_sludge load scientifically and timely to improve the removal efficiency of nitrogen in the Sequencing Batch Reactor.
在严格控制sBR工艺试验运行条件下，就污泥负荷对丝状菌污泥膨胀的影响规律进行了研究。
A study on the effect of sludge loading on filamentous sludge bulking in SBR is described in this paper.
活性污泥工艺是污水处理的主要工艺，传统的活性污泥工艺采用中等污泥负荷，曝气池为连续推流式。
The activated sludge technology is a major technique for sewage treatment. Medium sludge load and continuous push flow aeration tank are adopted in the traditional activated sludge technology.
本文综述了污泥负荷率的概念及有关理论，并给出了污泥负荷率在活性污泥法和厌氧生物处理中的若干应用。
The Conception of sludge load rate and Its Theory have been reviewed in this paper. Some applications used in activated sludge Process and anaerobic biological treatment have been presented.
通过用AB活性污泥法对处理豆制品废水工艺的试验研究，确定了优化工艺参数，包括溶解氧、 污泥负荷、曝气历时，并在选定的工艺条件下对豆制品废水进行了试验。
Treatment process of bean products wastewater with AB activated sludge has been studied. Through experiment, the optimum parameters, including DO, sludge load and time of aeration were determined.
选择器系统在低负荷条件下能有效地控制污泥丝状菌性膨胀。
The aerobic selector process can control filamentous bulking efficiently under low F/M condition.
研究了厌氧颗粒污泥膨胀床(EGSB)反应器处理高浓度有机废水过程中的有机负荷变化规律。
The change law of organic loading in the course of high strength organic wastewater treatment by expanded granular sludge bed (EGSB) was studied.
对于高负荷污泥的再生是无效的。
So the regeneration of high loading rate sludge was noneffective.
负荷、龄是活性污泥法处理城市污水设计、行中的重要参数。
Sludge load and age are two important parameters of design and running in municipal sewage treatment applied the activated sludge technics.
污泥膨胀是活性污泥法污水处理中的一个难题，尤其在处理高负荷的石化污水中。
Sludge bulking is a hard job in activated sludge treatment, especially in the treatment of high load waste water from petrochemical plant.
工艺特点：污泥处理负荷高，出水指标高，不需要传统工艺中的二沉池等。
Crafts features: high sludge treatment burden, high outlet water standard, and no need of the Secondary sedimentation tank like the traditional crafts.
厌氧序批式活性污泥法(ASBR)是一种新型的高速厌氧反应器，它具有耐冲击负荷，适用范围广等特点。
Anaerobic sequencing batch reactor (ASBR) is a new type and high rate anaerobic reactor, which has the advantages of being able to bearing high impact loads and having wide range of use.
污泥浓度随污泥龄的增加、水力停留时间的缩短、容积负荷的增大而增加；
Mixed liquor suspended solids increased with the increase of sludge retention times and volumetric loading rates.
此外，生物强化使活性污泥具有更好的生理活性和抗冲击负荷能力。
Moreover, bio-augmentation makes the activated sludge take on better physiological activity and anti-shock loading capability.
试验结果表明高负荷引起的污泥膨胀是由于溶解氧限制所造成。
The experimental result has been revealed that the dissolved oxygen limiting is the main reason for high loading rate bulking problem.
提出一类高负荷的丝状菌污泥膨胀现象，并对高负荷引起的污泥膨胀控制进行试验研究。
In this paper, a new type of sludge bulking problem caused by high loading rate is described, the control measures for this kind of problem has been studied.
颗粒污泥具有良好的沉降性能、较高的生物量和在高容积负荷条件下降解高浓度有机废水的良好生物活性。
Aerobic granular sludge demonstrates high settling velocities resulting in good liquid separation, high biomass retention, high activity and ability of withstanding high loading rates.
改进型涡凹气浮用于浓缩低浓度剩余活性污泥时浓缩效果好，固体负荷高，出水SS低，比涡凹气浮更适合于低浓度剩余活性污泥浓缩。
MCAF exhibits excellent thickening efficiency with high solid loading and low SS effluent, therefore is more suitable for thickening low concentration excess sludge.
选择器系统在低负荷条件下能有效地控制污泥丝状菌性膨胀。
Aerobic selector process can control filamentous bulking efficiently under low F/M condition.
它综合活性污泥法和SBR工艺特点，与生物选择器原理结合在一起，具有抗冲击负荷和除磷脱氮功能。
It synthesizes the characteristics of activated sludge processing and SBR in combination with a biological selector, shock loading and fluctuations in the influent can be completely buffered.
在试验中，以颗粒污泥为接种污泥，以实际废水为基质培养，在常温条件下采用低负荷启动。
The trial was started at low concentration and room temperature using the granular sludge as seed and actual wastewater as inoculated substrate.
应用推荐