气缸套轻微漏水、燃油中含有水；
气缸套是影响汽车发动机性能的重要零件。
主要有两种类型的气缸套：干缸套和湿缸套。
经硬化处理的气缸套、活塞已装车试验考核。
The hardened cylinder liners and pistons are undergoing the service testing.
本文介绍一种简易的活塞环与气缸套磨损试验方法。
A simple testing method of wear resistance for piston ring and cylinder sleeve is introduced.
为了精确测量气缸套磨损分布，需要使用高准确度测量系统。
In order to accurately measure the wear distribution law of cylinder liner, the application of high precision measurement system is necessary.
介绍6105柴油机气缸套动变形位移的测试、描述和分析工作。
This paper presents a circumstances of the test, description and analysis for dynamic deformation displacement to the cylinder jacket of 6105 diesel engine.
论文把图像处理与识别技术直接应用到气缸套表面异常磨损检测中。
The paper applies the technology of image processing and recognition to the detection of abnormal abrasion on the surface of cylinder liner.
为了提高硼铸铁缸套的耐磨性能，对硼铸铁气缸套进行激光熔凝处理。
In order to improve the wear performance of boron cast iron cylinder liner, the laser remelting process has been used.
分析活塞环弹流润滑性能时考虑气缸套径向变形的影响是非常必要的。
An elliptical cylinder model was built to analyze the effects of cylinder liner radial deformation on the elastohydrodynamic lubrication performances of piston ring.
气缸套是船舶柴油机的主要部件，其工作的好坏直接影响着柴油机的性能。
Cylinder liner is the main part of maritime shipping diesel engine, its operating well or not influences on the performance of the diesel engine.
此外，为了提高活塞环润滑性能应尽量减少气缸套和活塞环的径向变形量。
Also, the radial deformation of cylinder liner and piston ring should be reduced to improve the lubrication performances of piston ring.
介绍了内燃机气缸套的金刚石平台网纹珩磨工艺的特点及其对机油耗的影响。
The characteristics of diamond flat table honing technology of the cylinder liner and the influence of the technology too il consumption are summarized.
对气缸套离心铸造常出现的缺陷进行了分析，并提出了防止缺陷的具体措施。
In this paper, analysis to casting flaw in centrifugal of cylinder is given, also concrete measures for prevention of it.
为了适应柴油机功率增大，进行了用高磷铸铁制造g 32柴油机气缸套试验。
To keep pace with power increasing of diesel engines trial to adopt high phosphorus cast iron for production of G32 model cylinder block is carried out.
分析了柴油发动机湿式气缸套磨损及穴蚀的特点和原因，提出了相应的预防措施。
This paper analyses on the features and causes of the wear and cave - like corrosion on diesel motor's wet cylinder liner, and puts forward some corresponding preventive measures.
对金属型离心铸造高性能气缸套的缺陷进行了分析，介绍了工艺改进措施及取得的效果。
Defect analysis in cylinder sleeve with high performance by centrifugal casting in metallic mold is made. Measure to technological improvement and effect obtained are introduced.
本发明主要涉及一种用于内燃机、压缩机气缸套铸件成型中使用的绝热垫片及制造方法。
This invention relates to a thermal isolating pad used during the formation of cast cylinder jacket of internal combustion engine or compressor.
针对内燃机气缸套的动态变形问题，提出一套对湿式缸套在工作时的变形进行测试的方法。
Aiming at the dynamic deformation of engine cylinder liner, a set of testing methods for measuring the deformation of wet cylinder liner in operation are put forward.
某船用柴油机气缸套由于其恶劣的工作环境，再加上先天性设计上的缺陷，因此很容易损坏。
A kind of cylinder jacket used in Marine diesel engine is very easy to damage because of adverse working conditions and inborn defect in design.
作者介绍一种通过改变薄壁气缸套支承形式，再用常规量具来测量薄壁气缸套内外径的方法。
The authors introduce a method for measuring inner and outer diameter of thin wall cylinder with conventional measuring gauge, by means of changing the way of supporting the parts.
采用直接耦合的有限元分析方法对一汽油机的活塞组—气缸套系统的瞬态传热过程进行了研究。
The transient heat transfer process of piston set-cylinder liner system in gasoline engine was researched with direct coupling finite element method (FEM).
探讨了柴油发动机气缸套磨损的形成规律，分析了柴油发动机气缸套磨损产生的机理及其危害。
The wear rules of diesel engine are discussed. Producing causation and endanger of the cylinder liner wear for diesel engine are analyzed.
预紧工况下，缸盖螺栓沉孔深度对气缸套变形影响很大，适当的缸盖螺栓沉孔深度有利于减小气缸套变形。
Preload condition, the cylinder head bolt-hole depth of deformation of the cylinder sets a great impact on the proper cylinder head bolt hole depth Shen cylinder l.
通过对机车柴油机超压现象的原因分析，得出导致柴油机超压的原因有：活塞顶裂纹、活塞气环折断、气缸套磨损。
The cause of over-pressure in Diesel Engine includes fracture on piston, fracture of piston rings and cylinder wear.
通过对目前我国气缸套的几种加工技术的对比，论述了“蜂窝状点坑”节能气缸套在内燃机车柴油机上应用的可行性。
The feasibility of application of "honeycomb pit" energy conservation cylinder liner is analysed based on comparing several kinds of manufacturing technics for cylinder liner at present.
分析了当前发动机气缸套内孔平台珩磨网纹技术要求的不足，提出了基于三维表面的气缸套内孔平台珩磨网纹的技术要求。
The shortages of current specification for plateau honing cross hatch were analyzed, a new specification based on three-dimensional parameters was put forward.
针对缸套上、下两部分不同的工况条件，增加上部硬化轨迹的密度，使上、下两部分达到等同的耐磨性，大幅度提高了气缸套的耐磨性和使用寿命。
There are different working cases between two mated parts of jar. If the upper part has been indurated the life of jar would prolong.
针对缸套上、下两部分不同的工况条件，增加上部硬化轨迹的密度，使上、下两部分达到等同的耐磨性，大幅度提高了气缸套的耐磨性和使用寿命。
There are different working cases between two mated parts of jar. If the upper part has been indurated the life of jar would prolong.
应用推荐