液态模锻是一种新的金属成形工艺。
液态模锻可得到优质美观的把接头。
分析了汽车驱动齿轮的冷模锻工艺。
The cold forging process of the driving gear for automobiles was analyzed.
分析了汽车行星齿轮的冷模锻工艺。
This paper analysed the cold die forging technology of automotive epicyclic gears.
介绍了液压模锻锤上的模具结构。
The die structure on the hydraulic die hammer was introduced.
阐述了用粉末锻造工艺代替普通模锻的优点。
It has elaborated the advantages of the powder forging technology.
介绍了液压模锻锤的工作原理、结构及特点等。
The work principle, structure and features of the hydraulic die hammer are introduced.
模锻水压机要用模具，而自由锻水压机不用模具。
The drop forging hydraulic pressure confidential USES the mold, but the free forging hydraulic press does not use the mold.
提出了采用模锻工艺成形铁路货车支撑座的方法。
The method to form supporting pedestal of railroad lorry by die forging was proposed.
锻造水压机又分为模锻水压机和自由锻水压机两种。
The forging pump press divides into the drop forging hydraulic press and the free forging hydraulic press two kinds.
结果表明，闭式精密模锻工艺的新方法是十分有效的。
The results have shown that the new way of precision die forging is very efficient.
本文介绍了精密热模锻穿孔顶头的生产工艺及工艺特点。
The production process and its features of piercing plug by precision hot-die-forging are detailed.
通过有限元模拟对磁极精密模锻工艺参数和模具结构进行了研究。
The process parameters and mould structure for precision alternator pole forging are researched through FEM simulation.
实践表明，UBET用于模拟模锻过程的金属流动规律是可行的。
The experiments show that using UBET to Simulate the laws of the metal flow in drop forging was available.
介绍了在液态模锻液压机上成形自行车把接头的模具特点和成形方法。
This paper introduces the characteristics of mould and forming methods of forming bicycle handlebar by liquid forging hydraulic pres.
通过冲孔、扩孔、扩展、压扁、成型、模锻和机械技工操作生产定制管。
We provide custom tube fabrication utilizing piercing, flaring, expanding, flattening, forming, swaging and machining operations.
而且，对于闭式模锻工艺而言，坯料尺寸直接影响模锻工艺的顺利进行。
And as for the closed die forging, billet size will affect the process directly.
本文研究了不同热模锻工艺参数对GH4169合金锻件组织性能的影响。
The article researches the effect of different hot die forging process parameters on forgings structure and properties of GH4169 alloy.
差压计锻件可以采用普通开式模锻成形和可分凹模多向闭塞精密模锻成形。
The differential gauge forging can be made by general open die or horizontal split precision closed die.
叙述半固态模锻的实质、理论基础及应用范围，介绍了半固态模锻的应用举例。
The article has described substance, theoretical basis and applied range of semisolid die forging, and it has introduced some applied examples.
分析了粉末烧结材料镦粗和复压工艺的致密效果，提出了闭式模锻工艺设计原则。
The densification effects of upsetting and repressing are compared, and a technology design principle for closed die forging is suggested .
新工艺为金属基复合材料压力下浸渗半固态模锻成形一体化工艺奠定了研究基础。
It establishes the study foundation for metal matrix composites prepared by infiltration-stamp forging in semi-solid state integral technology.
通过支承座零件的工艺分析和模具设计，介绍了液态模锻技术在复杂零件上的应用。
Through the technology analysis and die design of the support saddle, the application of the liquid die forging technique for complicated parts was introduced.
介绍了钛合金斜盘模锻工艺流程、热处理规范以及工艺要求，并进行工艺试制和应用。
The Titanium alloy swashplate's pressure forging process, heat treatment criterion and process request are introduced and trial-manufactured.
基于实验基础，运用多因素正交试验，优化了一种适合液态模锻用铝合金的化学成分。
Based on experiment, using multifactor orthogonal test, the chemical composition of Al-alloy for liquid state forging was optimized.
数值模拟结果表明获得的预成形H/D最佳尺寸可明显减少模锻锤击次数和模具磨损。
Numerical simulation results show that the optimal preform H/D dimension thus obtained can greatly reduce hammering times and die wear.
采用商用有限元软件DEFORM3D对半轴套管胎模锻成形过程进行了计算机模拟。
The loose tooling forging of half shaft bushing on the steam-air forging hammer is numerically simulated using FEM software DEFORM3D.
介绍了差温无模锻造的概念和基本原理以及要在金属坯料土产生大的差温所采取的方案。
The concept of thermal differential mouldless forging and the method of generating large thermal differential are introduced first.
液压支架中的缸底生产批量不是太大，外形多变，所以它多在锤上用镶块模开式模锻成形。
So, it is always formed on the die-forging hammer by the open-die forging with insert mode.
液压支架中的缸底生产批量不是太大，外形多变，所以它多在锤上用镶块模开式模锻成形。
So, it is always formed on the die-forging hammer by the open-die forging with insert mode.
应用推荐