采用电流模理论和电流模电路设计超宽频带、超高速度模拟开关。
Current mode theory enables design of super wide frequency band, super high speed analog switches by introducing circuit structures and principles.
设备设计师能通过审慎地选择输入输出级电路的拓扑和共模阻抗来最小化失配或“非平衡”的效应。
Equipment designers can minimize the effects of these mismatches or "unbalances" through judicious choices of input and output stage circuit topologies and common-mode impedances.
该控制系统的优点是电路简单,位置检测准确,免受噪声和共模干扰影响,调速范围增加。
It features with simple circuit, accurate position detection, immunity from noise and common mode disturbance and wide speed scope.
但最根本的应该是在印刷电路板设计、元器件布置和连接线的安排上下功夫,抑制共模骚扰源的产生。
But most attention should be put on the PCB design, elements position and line connection, which can suppress the source of the common mode disturbance.
着重讨论了数字、模拟和数-模混合集成电路宏模型,并指出了尚待解决的问题。
Macromodels for digital, analog and digital-analog integrated circuits are analysed, and some uncertainties are also discussed.
并将模加、模乘、模平方运算集中设计成了一个多功能运算器,使控制电路更加简单。
The modular addition, modular multiple and modular square are placed in the ALU to simplify the controller.
为了提高前置级的共模抑制能力,采用了共模信号的抑制电路—右腿驱动和浮地跟踪。
The design adopts the circuit for constraining the in-phase signal, in order to improve the system's CMRR.
方法①提高整体电路共模输入阻抗以消除皮肤接触阻抗匹配失衡;
Methods High common mode input impedance of the circuit is used to remove the interference due to imbalance electrode impedance.
在平衡电路中,节点处奇次谐波流过差分路径。偶次谐波流过共模路径。
In any balanced circuit, odd harmonics circulate in a differential path, while even harmonics flow in a common-mode path.
可变模计数器作为一种基本数字电路模块,在各种数字系统中应用广泛。
As a basic digital circuit module module-alterable counter has an abroad application in various digital systems.
主放大器采用开关电容共模反馈电路在获得大输出摆幅的同时降低了功耗。
Used the switched capacitor Common Mode Feedback circuit(CMFB) in main amplifier to achieve a large output voltage swing and decrease the static power consumption at the same time.
设计了一个测量放大器电路,它由差动放大电路、共模抑制电路、双端单端转换电路和程控增益放大电路组成。
A measurement amplifier circuit is designed, which consists of circuits of differential amplifier, a common-mode rejection, double-end and single-end conversions and programmed gain amplifier.
新型浇模机还能用一种特殊的低熔点的合金制造金属器物,并使之适用于电子工业的电路板成品上。
It could also make metal objects out of a special alloy that melts at low temperatures, making it suitable for use in printed circuit boards for electronics.
以AOA电流模式多路输出积分器和AOA电流模多路输出比例电路为基础,设计了多功能二阶电流模式滤波器。
Based on a current-mode integrator and proportion circuit multiple outputs by AOA, multifunctional second-order current-mode filter was proposed.
就专业知识来说,最重要的是电路、数电、模电、控制理论。
With respect to professional knowledge, the most important is theory of circuit, several report, model report, control.
该系统是以MSP430F 449为核心,包括附叶式传感器,信号处理电路,液晶模块以及键盘模快以及报警设施。
The core of the system is MSP430F449, including peculiar sensors, signal process circuits, LCD modules, key modules and some alarms.
如果该封装波导谐振模恰好位于电路工作频率范围之内,电路与封装谐振模间的耦合将干扰电路的工作。
If the package resonant modes right within the operation frequencies range of the enclosed circuit, coupling between the circuit and these resonant cavity modes may disturb circuit operation.
利用传感器等效电路,分析了共模干扰造成传感器零点变化的实质。
The essential characteristics of transducer zero-excursion caused by common-mode interference are approached by means of a transducer equivalent circuit.
介绍了一种低压电流模带隙电压基准电路,并提出了一种新颖的启动电路结构。
A low voltage current mode bandgap voltage reference circuit with a novel start-up circuit is designed.
为提高放大器的抗干扰性能,放大器电路采用共模抑制能力很强的差模输入方式。
For improving the anti-interference ability of the amplifier, the Differential Mode input with high common mode restraining technology is adopted in amplifier circuits.
更换了运算放大调理电路增强了系统的共模抑制能力,改善微弱信号传输中的问题;
The MCU replaces the operational amplifier circuit so as to strengthen the system of common-mode rejection, improve the problems of weak signal transmission.
电路模拟证明这种简单结构具有很高的共模电压输入范围和很低的谐波失真。
This simple structure is proved through the SPICE simulation to have the very high common mode input voltage excursion and low harmonious distortion.
设计电流模脉冲宽度调制直流转换器时,人们广泛采用斜坡补偿电路来消除谐波振荡。
In the design of current-mode PWM DC-DC converters, the slope compensation method is widely used to prevent sub-harmonic oscillation.
介绍一种双纵模激光器的稳频装置原理及其电源电路。
The principle of a frequency stabilizing unit and its power circuit for a double longitudinal mode laser are introduced.
共模噪声是高速数字电路产生电磁干扰的主要原因,而共模电感又是共模噪声大小的决定因素。
Electromagnetic interference (EMI) in high-speed digital circuit is mainly generated by Common-mode (CM) noise, and the CM inductance is responsible for CM noise magnitude.
在带宽限制放大器电路的设计中使用了全差分运放结构,能有效抑制电路的共模噪声。
A fully differential operational amplifier is introduced in the design of wideband limiting amplifier which can restrain the common noise effectively.
本文提出了一种由半波长传输线加载并联串联LC电路构成的多模谐振器并对其在宽带滤波器的应用进行了研究;
Further, a multi-mode resonator composed of a half wavelength resonator loaded with two shunt series LC circuit is also investigated intensive.
共模反馈电路由开关电容共模反馈电路实现。
Auxiliary feedback amplifiers and switched capacitor common mode feedback circuit are employed.
共模反馈电路由开关电容共模反馈电路实现。
Auxiliary feedback amplifiers and switched capacitor common mode feedback circuit are employed.
应用推荐