苯乙烯完全覆盖在模体上，它是浅棕色，有着粗纹理。
The styrene completely covered the body mold which was a light brown and very rough textured.
模体标志图显示出分布在此抗体识别位点周围的氨基酸。
The Motif Logo shows the amino acid distributions around the sites recognized by the antibody.
对自制模体行ct扫描，分析CT图像伪影可能引起的图像误差。
The image error possibly from ct image artifact was analyzed after scanning a self made phantom by ct.
从确定真正的熔体温度开始，然后按照这个温度设定口模体的温度。
Start by determining the true melt temperature and set the die body to that temperature.
其加压方向后方侧的断面形状是圆形，其直径略等于成形用模体的内径。
Moreover, a backward side with respect to the pressing direction has a circular section and its diameter is substantially same as the inner diameter of the container.
基于科研论文的作者合作关系的演化特性，建立了一个科研合作网络的模体涌现模型。
Based on the evolvement characteristic of author collaboration, a motif emerging model of the scientific cooperation network is presented.
基于科研论文的作者合作关系的演化特性，建立了一个科研合作网络的模体涌现模型。
Study of the Level Evolution of the Corporation Competence Based on the Emergence Mechanism;
目的确定在医用诊断X射线剂量学中常用模体的反散射特性与人体反散射特性的近似程度。
Objective to determine the approximation of backscatter property of human body by stimulation phantoms commonly used in medical diagnostic X-ray dosimetry.
EF手图像超家族蛋白泛指一类含有由螺旋区-泡区-螺旋区构成的EF手图像模体的蛋白。
The EF-hand superfamily is a large group of proteins which contain EF-hand motif formed by helix-loop-helix.
算法基于混合模体模型学习，采用贪心策略，通过似然度最大化，逐次将新的模体加入到混合模型中。
Based on mixture motifs model learning through likelihood maximization, a greedy strategy that adds sequentially new motif to a mixture model is employed.
用户可以在该网站搜索寄生虫的特定核酸序列或者根据关键词、术语和模体搜索寄生虫蛋白质数据库。
The users can search a range of parasite specific nucleotide sequence databases or search parasite protein databases for keywords and text terms and motifs from here.
目前，已经有大量的方法用于识别转录因子结合位点，大致可分为基于保守模体和比较基因组学两种方法。
There are a large number of methods for identifying transcription factor binding sites, and it can be divided into two ways: conservative motif based and comparative genomics.
目的：用电脑计算在每个物体中每点处点源释放出的原始光子和平均能量损失，以获得光子线在水模体中的剂量分布情况。
Object: Using computer to calculate average energy lost by photons at every points in each body, in order to determine the dose distribution of photon radiation in the water phantom.
转化酸性卷曲螺旋蛋白(TACC)是一个蛋白家族，其特征是羧基末端共有的约200个氨基酸的卷曲螺旋模体(1)。
Transforming acid coiled-coil (TACC) proteins are a family of proteins characterized by a common coiled-coil motif of approximately 200 amino acids at the carboxy-terminal end (1).
本人所做的主要工作是参与了硬件部分——模体的设计，并完成了与之相配的软件部分——基于胶片的放射治疗剂量分析系统。
This work takes part in the design of the hardware-phantom and completes the dedicated software-the dose analytic system based on film for radiation therapy.
解决方法要么是减少口模出口应力，要么是减少组分从熔体中分离的倾向。
Solutions are either to reduce die-exit stress or to reduce the tendency for components to separate from the melt.
作者以体模实验为基础，测定了不同管电压拍摄胸片时的病人剂量，考察了提高管电压对胶片影像质量的影响。
On the basis of phantom experiments, patient doses from radiography at different tube voltages were estimated, and effect of elevated tube voltages on quality of film image was studied.
固体颗粒介质成形新工艺，是采用固体颗粒代替刚性凸模(或弹性体、液体)的作用，对金属板料成形的工艺。
Solid granules medium forming new technology (SGMF) is a technology which USES solid granules medium instead of rigid punch (or elastomer, liquid) to achieve the sheet forming.
熔体在模腔里冷却，硬化，直至完全固化。然后将模子打开，推出工件，并重复以上工序。
Here, the melt cools and hardens until fully set-up. The mold is then opened, the piece ejected, and the sequence repeated.
根据接线盒盒体的功能、结构与尺寸，进行了材料性能、注射工艺等分析，设计了注射模。
According to the function and structure and dimension of junction box, the material capability and injecting technology were analyzed, the structure of injection mold was designed.
结果表明，不同角度圆锥口模挤出过程中，熔体在收敛流道受到拉伸流变，导致强烈的入口弹性效应，表现出熔体在不同角度圆锥口模挤出时有不同的挤出胀大比。
The results show that the extensional flow of melt in convergent die results in intense entrance elastic effect and distinct extrusion swell in conical die with different angles.
介绍了固体颗粒介质成形新工艺，即采用固体颗粒介质代替刚性凸模(或弹性体、液体)的作用对板料进行软模成形的工艺，并阐述了新工艺的优点。
Solid granules medium forming technology is an advanced soft-tool forming technology which USES solid granules medium instead of rigid punch (or elastomer, liquid) to form sheet.
采用样条配置法数值求解环流器等离子体撕裂模方程。
Using spline collocation method to solve plasma tearing mode equations numerically is introduced.
集设计、开模、生产、加工、服务于一体。
介绍了清净管体注射模的设计与制造方法，并阐述了模具的工作过程。
Design and manufacture methods of injection mold for the defecator body were introduced, and working process of mold was stated.
电力系统图模一体化系统是电力系统分析、计算、设计、监控、管理等诸多应用系统实现图形可视化的基础。
Power system chart-module integration system is the basis of the visualized power system analysis, calculation, design, monitoring, management, among many other applications.
分析了模头流道结构和熔体在圆环型材挤出模中的流量，为环类型材挤出模设计提供了依据。
Analyzing the die channel structure and the melt flow of the circle profile in the extrusion die provides the basis of the die design for the circle profile.
分析了模头流道结构和熔体在圆环型材挤出模中的流量，为环类型材挤出模设计提供了依据。
Analyzing the die channel structure and the melt flow of the circle profile in the extrusion die provides the basis of the die design for the circle profile.
应用推荐