有一突块位于上盖槽口的背面。
A lug is arranged at the back of the notch of the lower cover.
所述定位锁嵌于所述槽口的横段部分。
The positioning block is embedded on the transverse part of the notches.
小齿，槽口：小齿或槽口，如在汽车车体中。
比例阀阀芯具有比较宽的边缘带有槽口的台肩。
A proportional valve spool therefore has wider lands with notches cut into the edges.
启瓶器(7)的一端与楔形槽口(5)相配合。
One end of a bottle opener (7) is matched with the wedge groove opening (5).
欧洲标准槽口设计，符合欧标五金件配置，安装简便。
Europe standard gate design and hardware fitting, convenient installation.
外壳上凡是为了接近安装槽口而提供的孔洞都需装设胶塞。
For the enclosures, rubber plugs are required in the holes provided for access to the mounting slots.
更糟糕的是结构组成部分的形状：槽口和尖角产生能引起裂缝的压力集中。
Worse still is the structural component's shape: notches and sharp corners create concentrations of stress that can initiate cracks.
我和埃伦都满不在乎，任由本杰明拿着钥匙在钥匙的槽口鼓捣。
Now both Ellen and I were perfectly happy to allow Benjamin to bang the key near the key slot.
系统设计变数为磁铁内环外径、外环内径、槽口深度和安匝数。
The system design variables are magnet external diameter of internal ring, internal diameter of external ring, depth of groove - ring and ampere turns.
因此，不久我就在与中国教育工作者讨论时谈起了钥匙槽口一事。
And so before long I began to introduce the key-slot anecdote into my discussions with Chinese educators.
现有的定子绕线机电机功率损耗大，并且不适用窄槽口定子铁芯。
The power loss of the existing stator winding machines is large, and the existing stator winding machines are not suitable for stator iron cores with narrow groove mouths.
槽深不能太浅，槽口宽应该适当取大些，中心互作用空间不宜太窄。
The width of the groove should be widened relatively, and the space of the interaction area should not be too narrow.
在给定槽口频率和带宽的滤波器的设计中，该方法不仅可行而且简单。
The approach is relatively simple and can be used to design the filters with specific notch frequency and bandwidth.
型材设计采用欧洲标准五金槽口，连接多个锁点，达到很好的防盗作用。
The profile design adopts European standard hardware notch to connect many locking points for better security.
可设置前后管连接件，所述前后管连接件包括盲孔或者槽口，以便于焊接。
Front and rear tube connectors may be provided that include blind openings or notches to facilitate welding.
铣削可根据所用的铣刀形状分别加工平面或斜面、槽口、缝、齿轮齿及其它型面。
Milling can produce flat or angled surfaces, groves, slots, gear teeth, and other profiles, depending on the shape of the cutters being used.
本杰明爱拿着钥匙走来走去，边走边用力摇晃着。他还喜欢试着把钥匙往槽口里塞。
Benjamin loved to carry the key around, shaking it vigorously. He also liked to try to place it into the slot.
他从钥匙声响中得到的乐趣大概跟他偶尔把钥匙成功地塞进槽口而获得的乐趣一样多。
He probably got as much pleasure out of the sounds the key made as he did those few times when the key actually found its way into the slot.
所述应力吸收结构可以是设置在悬臂舌片周边的缺口，也可是设置在悬臂舌片的槽口。
The stress absorbing frame can be a gap set on the circumference of the cantilever tongue, and can also be a notch set in the cantilever tongue piece.
槽刃下面有一落料槽，通过冲头刃在槽刃内冲切锚杆，可在锚杆上得到所需形状的槽口。
A charging groove is arranged below the groove edge, and groove openings forming the required shape can be obtained on the anchor rod through the punch edge cutting the anchor rods in the groove edge.
非铁磁材料筒(50)上开设的非铁磁材料槽(90)的槽口向定子方向或向转子方向。
The slot opening of the non ferromagnetic material slot 90 provided on the non ferromagnetic material barrel 50 faces to the stator direction or the rotor direction.
我们还利用阿嘎土的塑性在槽口内侧拍打出檐沟，并用槽钢加工的雨水口形成有组织排水。
Its plasticity allows gutters to be shaped. Roof drainage is well organized with these gutters and channel steel scuppers.
在苏加塔湖溢流向图尔卡纳湖的长期过程中，波浪作用在这些曾经的湖岸线上刻蚀出槽口和台阶形痕迹。
During a protracted period when Lake Suguta was overflowing into Lake Turkana, wave action carved notches and terraces into these fossil shorelines.
破裂诱导部（12）由在 冲击吸收体（1）的壁面上形成的槽口状的凸条（13）组成。
The explosion inducing section (12) comprises a protruded ridge (13) in a notch form formed on the surface of the wall of the shock absorber (1).
进入涡管槽口的挟沙水流会形成强有力的螺旋流沿涡管流动，能有效地排除底部推移质泥沙。
The flow with sediment trapped by the slit of the vortex tube can form vortex inside the tube and exclude efficiently the coarse sediment near the bed layer in front of the tube.
通过试验，研究了胶合板胶合强度检测试验中夹具与试件槽口的距离对胶合板胶合强度的影响。
An experiment was conducted to investigate the effect of the distance between clamp and cutting notch for plywood bond strength.
认为，淬火过程中产生的局部拉应力加上尖锐V型槽口引起的应力集中是造成开裂的主要原因。
It is concluded that the local tensile stress created during quenching process and the stress concentration due to sharp V-shaped notch are the primary reasons of cracking.
渤海8号平台是一座由槽口式改为悬臂式的自升式平台，并已经进入后服役期阶段的老龄化平台。
Bohai8 jack-up platform was refitted from slot type to cantilever-beam type and is in its later service period now.
渤海8号平台是一座由槽口式改为悬臂式的自升式平台，并已经进入后服役期阶段的老龄化平台。
Bohai8 jack-up platform was refitted from slot type to cantilever-beam type and is in its later service period now.
应用推荐