房子是由墙和梁构造而成；家是由爱和梦构造而成。
A house is made of walls and beams; a home is built with love and dreams.
介绍南、北航道桥的钢箱梁构造、结构体系、细部构造、结构计算和涂装方案等。
In this paper, the structures, structural systems, structural details, structural calculations and coating schemes of the steel box girders of both the south and north channel Bridges are dealt with.
钢构造由钢梁、钢柱和钢桁梁组成．被广泛应用于高层建筑。
Steel construction consisting of steel beams, columns, and trusses is extensively used for high buildings.
最后给出了牛腿的配筋形式以及牛腿和梁之间的连接构造。
Finally the reinforcement forms of the bracket and the connecting construction between the bracket and the beam are proposed.
地板和天花板组件是胶合构造，墙是建于梁和柱结构的平板，并于两边绝缘。
The floor and ceiling components are constructed out of glulam, the walls are constructed from a beam and post construction planked and insulated on both sides.
建议采用SATWE异型柱框架计算模式，并考虑带刚域梁的影响，同时适当考虑构造措施。
SATWE special-shaped column frame calculation mode should be adopted as suggested. Also, due consideration should be given to both the influences and construction measures of reinforcing beams.
牛腿是悬臂体系梁桥上部构造的一个重要组成部分，其应力状态较为复杂。
As an important part of superstructure of cantilever beam system, corbel's stress state is very complex.
新型竖筋构造形式对腹板主应力的影响分析，对连续体系箱梁的竖筋合理布置提供了参考意见。
The influence analysis for new conformation form of vertical prestressed tendon offered referenced opinion for continuous system box girder in reasonable arrangement of vertical.
本文首先介绍目前有关于弯梁桥的计算分析理论，对弯梁桥的构造与受力特点以及分析方法有一个初步的认识。
Firstly the thesis introduces computational analysis theory about curved bridge, get a preliminary understanding about the stress characteristic and analytical method for curved girder.
提出了哈尔滨市计生委办公楼结构改造所需的托换梁、托换柱、托换基础及相关连接构造的设计思路和方法。
Design thought and method of underpinning beam, column, foundation and relative joint construction in remodeling office building for Committee of Family Planning in Harbin are introduced.
对挂篮主梁悬浇施工中出现的构造和功能方面的问题作了进一步的探讨。
A further discussion was carried out on the Basket of Cantilever construction of the main beam in the structure.
对跨座式单轨交通轨道梁支座的主要构造形式、关键零部件的材料选用等进行了分析研究。
This article discusses the type of main construction and material selection of key parts on overseat, single-track beam support of traffic track.
本文根据斜交构造异性板的弯曲理论，把板梁组合结构比拟成板来计算。
The plate girders system structure was considered as a plate according to the theory of bending of skew plate.
文章介绍了麦罗维友谊大桥的构造和预应力体系设计，并对该桥的总体设计、结构内力分析以及箱梁施工程序等方面进行了介绍。
This paper introduces the structure and prestressing system design of Melovue Bridge and its overall design, structure inner stress analysis and construction procedure of box beam.
介绍了框架扁梁的节点构造要求和配筋详图；在工程应用中的优缺点以及应注意的一些问题。
The paper introduces the constructing requirement of frame flat-beam junction, retailed drawing of reinforcing bars, advantages and disadvantages in engineering application and other issues concerned.
压缩钢板构造的PC梁，就是在以往的简支pc梁弯压区内配置钢板。
Compression steel plate structure PC beam, is to place steel plate in bending area of bygone PC beam.
试函数和权函数依据短梁函数进行构造。
The trial functions and weighted function are constructed by the short beam function.
构造柱不仅在砖混结构房屋中主要起抗震作用，而用还具有承重柱及代梁垫的作用。
The structural column is mainly used for earthquake-resisting in brick construction building and now has used for load bearing and beam pad.
连梁的配筋构造不太复杂，方便施工。
Thirdly, reinforcement detailing of coupling beams can not be too complex.
针对太原地区筏板基础施工图中设计构造方面存在的不足之处，提出了暗梁式筏板基础的新概念。
In view of deficiencies existing in design structures in raft foundation's working drawings in Taiyuan area, this paper advances a new concept of raft foundation with concealed beams.
利用该折板结构的空间传力特性，设计了结构板、梁、柱的尺寸、布置、配筋和细部构造。
Taking advantage of folded-plate characteristic of transmitting forces spatially, the laying-out, section, reinforcing bars, and detail construction of slabs, beams, columns are designed.
介绍半整体式桥台桥梁合成梁式结点的构造、所用材料和施工顺序。
The structure , the material and the constructuring sequence are described in the paper.
结合一综合大楼抽柱改造工程，介绍高层框架结构抽柱改造设计中有关概念设计和构造处理方法及托梁内力的电算分析。可供类似工程参考。
Based on an actual project of local demolition column, the concept design of multi-story building renovation, some detail construction and stress analysis of the trimmer are introduced.
研究了扁平钢箱梁正交异性桥面板的构造设计。
The third model be mainly made up for considering geometry detail of orthotropic deck.
在构造带的东北部黑池梁-马路背一带，下二叠阳新统地层发育多期次、多方向、互相连通的断层系统。
In the area of Heichiliang-Malubei, northeast of Tongnanba structural belt, fault system develops a lot in the Yangxin series, with the properties of multiphase, multi-direction and inter-connected.
下构造层由震旦系—泥盆系构成，所谓阿-满低梁主要即发育于该构造层。
The lower structure layer consists of the Sinian to the Devonian, in which the A-Man low ridge is observed.
石门拱坝拱冠梁的变形特性与常规情况有所差异，但符合其地质情况和坝体构造。
There is some difference in the displacement property in cantilever of Shimen arch dam com pared with general, but it is consistent with its geological condition and dam structure.
斜拉桥索梁锚固结构区域受力集中、构造复杂，是控制设计的关键部位。
The cable-girder anchorage zones of cable-stayed Bridges, which bear giant cable forces and have complicated structure, are keys to structure design.
介绍北京通惠河北路道路立交中的Z 3、Z 4匝道桥钢箱梁的构造、设计和施工特点。
The structural formation, design and construction features of the steel box girders for Ramp Bridges Z3 and Z4 of Tonghuihe North Road Highway Interchange in Beijing are described.
在分析汴京虹桥的基础上，将叠梁拱桥扩充到钢筋混凝土结构和钢管结构，并结合实例进一步对单孔叠梁拱桥的构造、设计、计算和施工作了研。
The reinforced concrete structure and steel tubular structure are included into the laminated beam arch bridges on the basis of analysis of Bianjing Rainbow Bridge.
应用推荐