本文介绍一种个人剂量计校准装置。
A calibration equipment for personal dose meter is described.
分压强质谱计校准装置用于质谱计的校准。
A novel system used to calibrate partial pressure mass spectrometer was developed.
介绍了一种基于现场校准的动静载综合参数校准装置。
This paper introduces a kind of integrative parameter calibration system in the field.
本文介绍了自行研制的这种设备的校准装置原理和校准方法。
This paper introduces the calibration method of the system and the principle of the calibration equipment developed by ourselves.
在压力校准装置上进行实验,实验结论验证了理论分析的结果。
At the end of the paper, experiment was carried out with pressure calibration device and the results validate the conclusion to be correct.
该文介绍正压漏孔校准装置的校准原理,设计方法,参数选取。
The calibration principle, the design method and the parameters selection for the pressure leak calibration apparatus are introduced.
之所以有此需要,是因为所加载荷通常是垂直于校准装置平面的。
This is necessary because the loads are usually applied normal to the calibration fixture surface.
介绍一种高量程压力传感器(压力表)自动校准装置的应用设计。
The design of an equipment of automatic calibrating high-level pressure sensors is introduced.
还对最新的四种分压力质谱计推荐校准方法及相应的校准装置做了描述。
The latest four recommended methods to calibrate mass spectrometers and the corresponding apparatuses are also described.
许多频率域动态校准装置只能给出被校系统的幅频特性,缺乏相频特性。
Many dynamic calibration apparatus in the frequency domain can not give the phase-frequency response of the tested system.
正压漏孔校准装置可采用定容法和定量气体动态比较法进行正压漏孔的校准。
The methods of the constant volume and the dynamic comparison of quantitative gas are used in the calibration apparatus of pressure leak to calibrate the pressure leak.
本文介绍的校准装置,它可以“用己知漏率值的参考漏孔相对比较法来校准漏孔”。
This report introduces the calibration apparatus which is need through the reference leak in the relative comparison method of the known leakage rate value to calibration leaks.
论述了核工业华北放射性计量站利用计算机技术实现自制X射线校准装置参量控制的方法。
The method of parameters control by microcomputer of the calibration X ray device is described in the paper.
密切关注制造工艺和新产品工程师,以便架构,界定和传输光学特性设备和各项测试及校准装置。
Work closely with manufacture process and NPI engineer to architect, define and deliver optical characterization equipment and various test and calibration fixtures.
火箭发动机喷管三维运动参数的测试是对其精确控制的前提,其校准装置是保证测试精度的关键。
The 3d motion parameter measurement of a rocket motor nozzle is a premiss for accurately controlling the nozzle, and the calibration equipment is the key to ensure motion testing at a high precision.
本校准装置是用来校准用于测试火箭喷管三维运动的视觉系统,为其提供标准的静态和动态运动参数。
The calibration equipment is used to calibrate the visual testing system for rocket nozzle 3D motion, and supplies the standard position and motion parameters for static and dynamic calibration.
校准装置内的标准辐射,参考辐射和待测辐射由光学偏转方式进行同轴,使装置避免了大型导轨平台的使用。
In LBRCF, standard radiation, reference radiation and the radiation under calibration are coaxial by optical deflection, and the use of large-scale sliding tables is therefore avoided.
分析了现有数字信号校准装置存在的问题,提出了一种基于可重构技术的多功能数字信号校准装置的设计方法。
The existing problems of digital signal calibration device are analyzed and a novel one based on reconfiguration technique is presented.
可以预见,具备优异性能价格比的智能电量变送器校准装置,将给本行业的设计、生产和市场竞争注入巨大的活力。
So it is sure that the electrical quantity transducer calibration device with high performance-Price-Ratio will bring fresh vigor to the design, production and market of the related industry.
文中还对基于双离心机的线加速度计动态校准装置和线振动台进行比较,指出了前者在线加速度计动态校准中的优点。
By comparing the linear accelerometer's dynamic calibration device with linear vibrator, it pointed out the advantages of the former in the process of linear accelerometer dynamic calibration.
介绍了一种自行研制的标准表法现场流量校准装置的数据采集器,详细阐述了采集器的硬件组成、软件结构及实现的功能。
A new kind of data acquisition instrument of flow calibrating instrument in field by using the standard flow meter has been developed.
综述了激光测速仪的现有校准方法,提出了采用 模拟目标进行激光测速仪校准的新方法,并根据该原理研建了校准装置。
Through a trial on the simulant installation of dynamic flatness detection, the flatness signal presented by the new model is just the same as that obtained through experiments.
在此方案的基础上,对这种校准装置的可行性进行了论证,并通过实际测量结果,验证了这种心电模拟器校准装置的可行性。
Based on this plan, the feasibility of the new calibration equipments is proven. The actual measurement results validate the new calibration equipment for ECG simulators.
为了避免机床这种一体式双工位测量和加工结构在工作时产生较大的误差,设计了双工位的校准装置,并对校准原理和校准过程进行介绍。
In order to reducee the errors brought out from the measuring and grinding works finished in one machine, a calibrating device is designed and the principle and the calibrating process are introduced.
校准,修理,调整,定位或改正测量装置的测量功能。
CALIBRATE, To repair, adjust, fix or correct the measuring capabilities of a measuring device.
该文介绍了落锤液压动标装置的工作原理及其主要功能,分析了现有校准方法存在的问题。
This paper describes drop hammer hydraulic dynamic calibration device's operating principle and its main function. The problems of the current calibration methods are also studied in details.
本文介绍电校准辐射计的锥腔形黑涂层反射比的测量原理、装置、方法以及测量结果。
This paper describes the principle, equipments, method and results in the measurement of reflectance of black coating in the electrically calibrated conical cavity radiometer.
动态流量法超高真空标准装置是用于校准真空规的绝对真空计量标准。
The dynamic flow method UHV standard apparatus is an absolute vacuum standard for vacuum gauge calibration.
该装置采用比对法校准,选用性能比较稳定的磁悬浮转子粘滞规作为一级传递标准。
This facility USES the comparison calibration, it takes the viscosity gauge of magnetic suspension rotor with stable performance as the first class of transmission standard.
该装置采用比对法校准,选用性能比较稳定的磁悬浮转子粘滞规作为一级传递标准。
This facility USES the comparison calibration, it takes the viscosity gauge of magnetic suspension rotor with stable performance as the first class of transmission standard.
应用推荐