过流保护电路将检测电流转化为栅压控制开关管;
Over-current protection circuits convert the detecting current into the gate voltage which controls the switch FET.
器件的发光强度有所提高,但栅压对载流子的控制作用不理想。
Luminescence intensity increased, but the role of the gate voltage to control current is not ideal.
串联电阻不仅会使迁移率降低,还会使峰值场效应迁移率所对应的栅压减小。
A series resistance not only decreases field-effect mobility but also reduces the gate voltage corresponding to the peak field-effect mobility.
分析了反型层的杂质分布、最大沟道电势与注入剂量、氧化层厚度和栅压等之间的关系。
The relations of impurity profile in the inversion layer and the maximum channel potential versus dose, width of SiO_2 and gate bias are analysed.
采用P型栅压自举开关补偿技术,可以有效地克服采样管导通电阻变化引入的非线性失真,提高采样精度。
By compensating with P-type bootstrapped switch, this circuit can overcome nonlinear distortion, which is generally introduced by signal-dependent on-resistance, and improve sampling resolution.
采用一个随栅压变化的平均电容公式,并用一个简单的解析表达式来描述沟道平均迁移率随栅压的变化关系。
The drain current model is simplified by an average capacitance formula and a simple expression of channel average mobility with gate voltage.
通过直接栅电流测量方法研究了热载流子退化和高栅压退火过程中PMOSFET ' s热载流子损伤的生长规律。
The growth laws of hot carrier damage of PMOSFET's during the hot carrier degradation and the high field annealing are studied by direct gate current measurement.
本文采用烟显示和三维流场测量的方法,研究扩压叶栅角涡的物理模式。
The flow visualization by means of smoke and measurement of 3 -d flow field are conducted to investigate physical model of the streamwise corner vortexes in a compressor cascade.
此外,通过试验证明:在离心压气机上采用双列叶栅扩压器,可以改善压气机性能,扩大压气机的稳定工作范围。
Furthermore, experiments show that the adoption of double-row cascade diffusers in centrifugal compressors will improve its performance and widen its stable operating range.
通过壁面静压测量、流场显示及气动探针测量研究了不同掠型叶片组成的平面扩压叶栅特性。
The performance of rectangular compressor cascades composed of different swept blades was studied by static pressure measurement, flow visualization and probe measurement.
阐述了在环形扩压叶栅内利用非定常激励减少分离区损失的实验研究成果。
This paper presents the results of the experimental investigation on the effects of internal acoustic excitation on enhancing performance of the annular cascade.
以离心压缩机扩压器叶栅为例,在两个给定设计工况下采用所提出的方法求解其最佳叶片型线。
A diffuser cascade of a centrifugal compressor was chosen to be designed with the proposed approach, with its two operating points specified, and its blade profile to be optimized.
本文选取某重复级压气机平均半径处的型线,进行平面扩压叶栅非定常数值模拟。
In this paper unsteady numerical simulation of planar diffuse cascade is performed in the model profiles that choosing from mid-span of the blade in a repeated compressor.
结果表明弯掠叶栅端部损失降低而叶展中部损失增加,但相应的端部扩压因子有所减小。
The result shows that the swept-curved cascade has lower endwall loss and higher midspan loss as compared with the straight cascade.
从塑壳断路器尺寸紧凑、栅片数受限制出发,提出弧柱压降对限流同样起很大作用。
According to the compact geometry along with limited number of deion plates of MCCB, it was proposed that arc column voltage also play an important role in interrupting process of MCCB.
浸塑电焊网、隔离栅及防风抑尘网、钢筋焊接网等。公司拥有先进的大型自动电脑程控压阻焊机,齐全专业的检测设备和精湛的加工工艺。
The company has the advanced large-scale automatic computer program control resistance welding machine, complete specialized check-out facility and exquisite processing craft.
为了改善扩压叶栅气动性能,采用拟压缩性方法对不同周向弯曲角度的正弯曲叶片压气机叶栅内三维粘性流场进行了数值模拟。
The numerical simulation has been carried out to investigate the viscosity flow in the compressor cascades with curved blades of different circumferential bow angles.
为了改善扩压叶栅气动性能 ,采用拟压缩性方法对不同周向弯曲角度的正弯曲叶片压气机叶栅内三维粘性流场进行了数值模拟 。
The numerical simulation has been carried out to investigate the three dimensional viscosity flow in the compressor cascades with curved blades of different types of stacking lines.
为了改善扩压叶栅气动性能 ,采用拟压缩性方法对不同周向弯曲角度的正弯曲叶片压气机叶栅内三维粘性流场进行了数值模拟 。
The numerical simulation has been carried out to investigate the secondary flow in the compressor cascades composed of the positive curved blades and negative curved blades.
给定不同型式的进口边界层,在两种不同亚音速条件下对一平面扩压静叶栅的弯叶片流场进行了数值模拟。
For several given types of inlet boundary layer, a numerical investigation on flow field of bowed stator vanes under two inlet subsonic Mach Numbers was carried out.
给定不同型式的进口边界层,在两种不同亚音速条件下对一平面扩压静叶栅的弯叶片流场进行了数值模拟。
For several given types of inlet boundary layer, a numerical investigation on flow field of bowed stator vanes under two inlet subsonic Mach Numbers was carried out.
应用推荐