晶粒度是影响铸轧铝板坯性能的重要因素。
The crystal grain size is the important factor for performance of cast-rolling aluminium stocks.
近年来,达涅利自动化公司在板坯连铸控制方面积累了相当多的经验。
In recent years, Danieli Automation has gained considerable experience in the control of the continuous casting of slabs.
生产实际应用表明,该模型对减少板坯表面横裂纹和角部裂纹有显著效果。
The practice shows that the model can remarkably reduce transversal and corner cracks on slab surface.
回收再利用也将推动电弧炉技术的进一步完善和薄板坯连铸技术的广泛采用。
It will also foster the further perfection of EAF technology and the ubiquitous use of Thin Slab Casting.
洁净钢的生产是薄板坯连铸的关键问题。
The cleanliness of molten steel is a key factor for thin slab casting.
并提出了进一步改进薄板坯表面质量的工艺措施。
The technical measures for further improving slab quality were also provided.
在板坯中碳的偏析同时存在负偏析区和中心正偏析。
In the slab, the negative carbon segregation region and positive segregation in the center are observed simultaneously.
首先建立了两流薄板坯连铸连轧流程生产调度规则库。
Schedule rules for two-strand thin slab casting and rolling were established.
连续铸轧技术是一种短流程、近终成型板坯加工技术。
Continue roll cast is a short and near-shape machining technique.
板坯直接经冷加工成材和热处理后,具有独特的电磁性能。
The iron sheet has special electric and magnetic properties after cold forming and heat treatment.
实验结果对于薄板坯连铸保护渣的设计具有一定的指导意义。
The experimental results are of certain significance in guiding the design of the thin slab CC mold flux.
本文简述了凸底锭形状及凸底对提高板坯收得率所起的作用。
This paper describes the shape of truncated pyramid bottom ingot and its effect on slab yield.
研究了喷蒸真空热压杨木大片刨花板坯内部的温度分布特征。
The temperature behavior within the Poplar flake-board mat during steam injection vacuum pressing (SIVP) was studied.
讨论了两流薄板坯连铸连轧作业时铸坯在加热炉内的运动情况。
The movement of slabs in reheating furnace from two-strand thin slab continuous caster operations is discussed.
介绍了攀钢2号板坯连铸机的设计特点及采用的几项先进技术。
It introduces the design characteristic and some advanced technologies on no. 2 slab caster in Pansteel.
本文主要介绍了唐钢薄板坯连铸机结晶器漏钢预报系统的功能算法。
This paper mainly introduces the mould breakout detection system function arithmetic of thin slab caster in Tang Steel.
在板坯铸机的生产过程中,二次冷却制度是影响铸坯质量的重要因素。
During the producing process of slab caster, secondary cooling system is a very important factor which influences slab quality.
热连轧机板坯跟踪系统是连轧过程中计算机控制系统不可缺少的部分。
The slab tracking system for hot strip mill is an indispensable part in the computer controlling system during continuous rolling.
通过分析调宽机模块的运动特性,可获得板坯侧压的位移和速度边界条件。
The boundary condition of velocity and displacement was gained during slab side press, through analyzing sp die kinematics character.
连续铸造中板坯宽度和轧制过程中带钢宽度及平坦度的在线测量非常重要。
ON-line measurements of slab width during continuous casting and strip width as well as flatness during rolling are important.
现在,公司致力成为中国领先的高品质地板坯料与木枋的生产商与供应商。
Now, the company aims to become China's leading high-quality billets and wood flooring Fangde manufacturers and suppliers.
对有裂纹的连铸板坯进行了高温塑性试验、低倍、金相组织和夹杂物分析。
The slabs with these cracks were analyzed by means of high temperature plasticity, macrostructure, microstructure and inclusion test.
在薄板坯连铸连轧生产线中,加热炉的缓冲能力有时成为制约生产的关键。
Buffer time of tunnel furnace is the key process in thin slab continuous casting and rolling (TSCR) line.
无委托板坯匹配问题是研究如何将这些板坯合理分配给热轧计划中的合同。
The open-order slab matching problem is how to assign these slabs to compatible orders in the hot-rolling plan.
该研究结果为进一步优化薄板坯连铸结晶器内腔形状及工艺参数提供了依据。
The results laid a foundation for further optimization of mold's internal shape and casting parameters.
通过对数学模型的求解,研究分析了加热炉内炉气、板坯温度分布的变化规律。
By solving the mathematical model, the regulation on the temperature distribution of the furnace gas and slab in heat furnace was analyzed.
本文应用水力学及数学模型的方法研究了超低头板坯连铸结晶器内钢水流动特征。
This paper studied liquid steel flow property in mould of super low head slab CC with hydraulic model and mathematics model.
测量内容包括:板坯位置、边部轮廓、板坯宽度(多点测量)、板坯边缘厚度。
Measured properties are slab position, edge profile, slab width (in multiple points) and slab edge thickness.
测量内容包括:板坯位置、边部轮廓、板坯宽度(多点测量)、板坯边缘厚度。
Measured properties are slab position, edge profile, slab width (in multiple points) and slab edge thickness.
应用推荐