机筒上的销钉对挤出特性影响力很小。
The effect of the core pin on extrudate characteristic was little.
机筒进料段开槽对吹膜有良好的效果；
The grooving in the feed zone on the barrel had a good result for blown film.
机筒上装有电阻加热器，热传递快而均匀。
Resistance heater equipped with the cylinder, ensuring that heat is transmitted evenly and rapidly.
测试并分析了该机的空载下机筒的温度场。
The barrel temperature field without load is tested and analysis.
通过加大磨机筒体直径达到提高产能的目的；
The output is increased by means of enlarged mill's chamber.
每节机筒间、机筒与衬套间具有良好的互换性。
Between each knot of machine barrel, and between machine barrels and bushes is favorable exchangeability.
本公司是国内主要制造螺杆及机筒的专业厂家。
The Company is the leading manufacturer of the screw and barrel professional manufacturers.
你也许需要降低最后一节机筒的温度来冷却熔体。
You may also have to lower the last barrel zone to cool the melt.
因此，该机筒具有高强度、高耐磨、高耐蚀等特性。
Wherefore, this machine barrel possesses characters like high strength, wear resistant, and strong anticorrosion.
最后，通过离心铸造生产出双螺旋辊式磨浆机筒体。
At last, cylinder of double spiral roller grinded-paste machine is produced by centrifugal casting.
销钉机筒挤出机的开发改进，就遇到了类似得问题。
The study and development of Pin Barrel Extruder mentioned above encounter such problems.
优化设计和精心制作的螺杆、机筒有极好的塑化效果。
The screw and machine barrel with optimization design and elaboration have excellent plasticizing effect.
它就是喂料口，许多挤出机制造商不把它当做机筒区。
Well, it's the feed throat. It's the zone most extruder manufacturers do not treat as a barrel zone.
理论预测的固体床宽度和机筒压力与实验结果基本吻合。
The numerical data including the width of solid bed and pressure fit well with those of experiments.
这种现象又使物料在机筒内停留时间增加，造成物料分解。
This phenomenon and make the material stay in the barrel time increased, the material break down.
也就是说，聚合物必需粘着于机筒而不是螺杆才能向前移动。
That is, the polymer must stick to the barrel more than it does to the screw to move forward.
本文主要叙述发电机筒式导轴承间隙对机组安全运行的影响。
This paper mainly describes the influence of generator barrel bearing on the operating safety of the units.
挤出机的机筒、螺杆均采用优质合金钢，经氮化和精密加工。
Machine barrel and screw arbor of extrusion machine both adopt quality alloy steel, with nitriding and fine machining.
机筒在五轴加工中心上精密加工，内孔和销孔定位准确，精密度高。
Machine barrels are precisely processed at the Five-ax Machining Center with high accuracy and locations of inner bore and pinhole are nicety.
对双螺杆磨浆机的螺杆扭矩、轴向推力和机筒压力进行了测量实验研究。
Metrical experimental studies on screw torque, axial thrust, barrel inwall pressure of twin screw pulping extruder (TSPE) were done.
这样，螺杆与机筒的配合直径间隙，随着二者的逐渐磨损而一点点加大。
In this way, the matching of the screw and barrel diameter clearance, with the gradual wear and tear of the a little bit more.
本文采用相似准则，利用有限元法对磨机筒体最后一道盖面层焊进行分析。
The paper applies the similar rule to analyze the last pass cover welding by finite element analysis.
论述了内孔喷焊装置的设计原则，并提出了两种规格机筒喷焊的最佳规范。
The principles to designed the hole used plasma gun is discussed and two kind of spraying welding procedures are put forward.
本文通过对销钉机筒挤出机结构的合理简化，得到数值的和实验的分析模型。
Through the reasonable simplification of the pin barrel extruder structure, we get the model for numerical simulation and experiment.
电加热器、螺纹元件、机筒、芯轴系列产品的生产，居于国内同行业的领先水平。
Electric heater, screw elements, barrel, Mandrel series of production, living in the same industry-leading level of domestic.
较详细论述了磨机筒体缗法兰联接常见结构及存在问题，以及对生产组织的影响。
The paper describes the common structure and some existing problems of flange joint on mill's cylinder, and the influence on manufacture organization.
挤出机：采用品牌调速系统，屏障型两极混炼pp - R专用螺杆，开槽机筒。
Extruder: it has adopted the famous brand speed-regulating systems, shielding double-pole mixed PP-R specialized screw and the cylinder which has channels in it.
对磨机筒体的载荷进行了理论上的分析计算，为同类机体的载荷计算奠定了基础。
Secondly, the body's load was ratiocinated theoretically and all load's equation is obtained, which provided the foundation for the same kind body.
科瑞电器厂是集设计、生产、研发各类电加热器、螺纹元件、机筒、芯轴的专业厂家。
Corey Electrical Appliance factory is a set of design, production, research and development all kinds of electric heaters, screw elements, barrel, Mandrel specialized factory.
科瑞电器厂是集设计、生产、研发各类电加热器、螺纹元件、机筒、芯轴的专业厂家。
Corey Electrical Appliance factory is a set of design, production, research and development all kinds of electric heaters, screw elements, barrel, Mandrel specialized factory.
应用推荐