表面有机化改性是提高木质填料(木纤维或木粉)的分散程度和增强其与聚合物基体界面相互作用的重要手段。
Surface organic modification plays an important role in improving wood fillers (xylon and wood flour) dispersion and enhancing the interfacial interactions between the wood fillers and polymer matrix.
介绍聚丙烯木粉板在汽车上的应用。
This paper gives an account of the application of polypropylene wood flour stock to the automotive industry.
在可燃成份中,木粉是特别重要的。
Woodmeal is of particular importance among combustible ingredients.
采用水蒸气蒸馏法提取木粉中的精油;
The essential oil from wood was extracted by steam distillation.
另一种是把软木粉用200目或更细的筛网进行筛选。
The other method is to pass the powder through 200 or fine mesh screen.
另一种是把软木粉用200目或更细的筛网进行筛选。
The other method is to pass the powder through 200 or fine mesh screen .
考察了发泡剂用量、木粉含量对发泡复合材料性能的影响。
The effect of foam agent and wood flour content on the properties of the foamed composite materials was studied.
不同国家的木粉尘的职业接触极限值(或极限值)却不尽相同。
The occupational exposure limits (OELs) of wood dust in different countries are however not the same.
综纤维素的近红外预测值与木粉颗粒度之间不存在统一的规律性。
The predicted value of holocellulose has nothing to do with the change of size of example.
采用PVC树脂和木粉加入发泡剂制得PVC/木粉发泡复合材料。
The foamed PVC/wood-flour composite(WPC) was prepared from PVC and rice husk powder with blowing agent.
简述了木质材料的性质和木粉改性的方法,如物理方法和化学方法。
Both of the properties of wood and modification methods of wood-fiber were described, for example, physical methods and chemical methods.
木粉和蔗糖中存在的羟基等还原性基团显著降低了体系的热稳定性;
The hydroxyl and other reductive groups present in wood powder and cane sugar lower remarkably the thermostability of the system;
木粉与高密度聚乙烯的相容性不好,是裂纹引发时间缩短的主要原因。
Because of the bad compatibility of wood flour and polyethylene, the crack initiation time shortened.
处理后的纤维素和杉木粉的氢键作用均被削弱,相对结晶度均被降低。
Hydrogen bonding actions of cellulose and fir powder were all weakened greatly after treatment and the crystallinity of them were also decreased.
用木粉与高密度聚乙烯(HDPE)复合制备了能代替木材的复合材料。
The composite which can replace the wood was made by wood flour and high density polyethylene(HDPE).
并在使用吡啶的反应体系下研究了工艺条件对改性杉木粉wpg的影响。
Furthermore, we studied the influences of the process conditions on WPG of modified fir powder when pyridine was used as catalyst and acid absorbent.
照片A表明了未经溶解的原生木粉是多孔的网状结构,且多数孔洞被堵塞。
It shows in Photo a, powder of the native wood without dissolving is a porous network structure, and the majority of holes have been blocked.
竹屑、木屑等经过干燥、粉碎、筛选制得符合一定细度要求的竹粉、木粉。
The bamboo sawdust, the wood sawdust and the like are dried, grinded and screened, thus obtaining the bamboo powder and the wood powder meeting certain fineness requirements.
考察了木粉含量、粒度、界面相容剂用量对复合材料力学性能、流动性的影响。
The effects of compatibilizer content, wood flour content and size on the mechanical and fluid properties of composite were studied.
研究了聚丙烯与木粉以不同比率复合而成的材料的物理力学性能和复合形态特征。
This article deals with the mechanical properties of wood powder polypropylene composite panels and the morphology of the esterification of the wood surface while varying the level of wood content.
研究表明,H3BO3与杉木粉中的羟基发生了缩合反应,纤维素的结晶被破坏;
The results showed that hydroxyl groups of H3BO3 reacted with the hydroxyl groups of fir powder, and thus the crystalline phase of cellulose was destroyed.
它们常用木粉和无机填料充填,并可与纸、纺织品和类似物料结合用作涂料或浸渍剂。
They are often extended with wood flour and inorganic fillers and may be used in combination with paper, textiles, and similar materials, either as coatings or impregnants.
硅酸钠能使软木粉粘结在模具表面,而且还有助于软木粉耐受熔融铅合金的碳化作用。
The sodium silicate makes the cork stick to the mold surface and also helps to withstand the charring action of the molten lead alloy .
硅酸钠能使软木粉粘结在模具表面,而且还有助于软木粉耐受熔融铅合金的碳化作用。
The sodium silicate makes the cork stick to the mold surface and also helps to withstand the charring action of the molten lead alloy.
采用短切玻璃纤维与木粉组合,可以获得力学性能很高,能作为结构材料使用的复合材料。
Composites with high mechanical properties that can be used as structure materials can be obtained by combining wood flour and chopped glass fiber.
加工类别:玉米、花生、瓜干等粮食类,化工原料类,塑料类,木粉类,软木类,浆类等。
Processing category: Corn, peanut, dried potato and grains, chemical raw materials, plastics, wood powder, softwood and slurries, etc.
以再生聚丙烯(PP)、锯末木粉为原料,采用双螺杆挤出机挤出造粒制备了塑木复合材料。
The wood-polymer composite(WPC) was manufactured by twin-screw extruder with recycled polypropylene (PP) and wood powder as material.
用硅烷偶联剂A- 171和天然橡胶胶乳(MGL - 30)改性碱处理后的橡胶木粉。
The alkali treated rubber wood-flour was modified by silane coupling agent A-171 and MMA grafted natural rubber MGL-30.
结果:车间空气中木粉尘、其他粉尘、甲醛、甲苯、二甲苯浓度超标,工作场所噪声不合格。
Results:Workshop wood dust in the air, other dust, formaldehyde, toluene, xylene concentrations do not comply with national health standard and workplace noise fails.
介绍了废旧塑料再利用技术,探讨了PVC木塑复合材料的配方、工艺、制备及木粉的处理方法。
Techniques for the reutilization of waste plastics were introduced. The formula, process, preparation of PVC/wood composite materials were investigated as well as the treating methods for wood powder.
应用推荐