摇动筛依靠曲柄连杆机构使筛箱作往复运动。
Shaking screen on crank-connecting rod for reciprocating motion to the sieve case.
发动机的动力机构实际上就是曲柄连杆机构。
The power mechanism of the engine is actually called the crankshaft and connecting rod mechanism.
本文介绍了一种采用双曲柄连杆机构的高速单缸柴油机。
A single-cylinder high-speed diesel engine with dual symmetric crank-conrod mechanism was developed and tested on a dynamometer test bed.
本系统的应用，快捷有效地支持了曲柄连杆机构的设计开发。
The application of this system supports the development of crank-link mechanism promptly and effectively.
在高压条件下，通过曲柄连杆机构的变速运动实现钻井泵动力的传递。
Through the crank link system in high-pressured condition of variable speed movement with drilling pump power transfer.
本文提出一种计算曲柄连杆机构参数偏差对内燃机平衡性能影响的方法。
This paper provides a method for calculating the influence of parametric deviation of crank gear on balancing quality of internal combustion engines.
本机床的启动与停止用一多片式离合器控制，滑枕的往复运动通过曲柄连杆机构实现。
The start and stop of the machine are carried out by a multiple-disk clutch and the reciprocation of the ram is achieved by a crank connecting link.
讨论了曲柄连杆机构运动功能可靠性的概念，并分析了造成该机构运动功能丧失的各种磨损因素。
The concept of reliability of function for crankshaft-connecting rod system is discussed, and the wear-out factors which make system function lost are analysed.
本课题设计的加热炉前方坯取料装置，采用液压缸驱动曲柄连杆机构，完成钢坯的升降、平移。
The issue before the billet furnace designed for device, a hydraulic cylinder-driven crank linkage, the completion of the billet movements, translation.
本文阐述了6105QB型柴油机的运动计算及动力计算，分析了该机型曲柄连杆机构的受力特点。
This article presents the calculating of kinematics and dynamics for model 6105QB diesel engine. And analyses the character of force that exerted on the crank and rocker mechanism inside the engine.
本发明解决了现有的曲柄连杆机构式燃油发动机存在工作效率低、易出现故障、外形体积较大的问题。
Problems like low work efficiency, easy fault and large volume of outline of figure of existing crank-connecting rod mechanism fuel engine can be solved through the invention.
这种液压驱动隔膜泵动力端与传统隔膜泵动力端相比，把传统动力端的曲柄连杆机构设计为液压缸驱动机构。
Compared with the driving force used in the traditional diaphragm pump, the hydraulic-driven replaced the crank linkage driven with a new type of hydraulic cylinder.
在常用于稳态仿真的容积法模型基础上，结合曲柄连杆机构的动力学模型，建立了二冲程柴油机的扭矩预测模型。
Based on control volume model often used for steady state simulation and crank-connecting rod model, a torque generation model for a two-stroke diesel engine was established.
在发动机维修中，曲柄连杆机构的维修是重中之重，它的维修好坏对发动机的正常工作和使用寿命有很大的影响。
In the engine repairs, the repair of crank rod system is very important because it affects the normal work and service life.
在分析摩托车发动机曲柄连杆机构不平衡力的基础上，结合国内和国外的实践，总结了摩托车单缸发动机的基本平衡方法。
Based on analyzing the unbalanced force of crank-connecting rod mechanism, this paper describes the balance of motorcycle single-cylinder engine according to practices home and abroad.
本文分析了内燃机曲柄连杆机构往复运动件的高谐次运动对轴系惯量变化和固有频率的影响，并对一多缸机轴系进行了扭振计算。
The effects of high order motions of reciprocating parts on the variation of inertias and natural frequencies of crankshaft system are discussed in this paper.
为此，本文提出了“平移燃烧”理论及其“某机构”和“贮能连杆”机构的设想，抛砖引玉地力求解决曲柄连杆机构这个致命弱点。
Therefore, we put forward a theory of translation combustion and some tentative ideas such as developing a special mechanism and a connecting rod which can store energy in this paper.
为了提高车辙测试的自动化程度，在进行车辙试验时方便地控制测试小车的行程，用步进电机驱动小车代替传统的曲柄连杆机构驱动；
To increasing the automation degree of rut tests and controlling the small car route conveniently, a stepper motor replaces the traditional crank connecting rod organization for small car drives;
往复式压缩机使用的是活塞、曲柄、连杆机构或活塞、曲柄、滑管机构，旋转式压缩机使用的是转轴曲轴机构。
Reciprocating compressors is using the piston, the crank, link mechanism or the piston, the crank, sliding tube institutions, rotary compressor rotor is the use of crankshaft institutions.
钻井泵的动力端是一组曲柄、连杆机构。
Drilling pump power end is a group of crank, link mechanism.
对平面五连杆机构曲柄存在条件进行了探讨，并提出了机构类型的判别方法。
This paper discusses the existing conditions of planar five bar linkages with double cranks.
基于所完成的平面机械系统运动学分布式仿真软件，本文实现了平面四连杆机构、曲柄滑块机构的分布式仿真算例。
A typical four-bar mechanism and a typical slide-crank mechanism are used for test of the distributed simulation environment and applications developed in this thesis.
基于所完成的平面机械系统运动学分布式仿真软件，本文实现了平面四连杆机构、曲柄滑块机构的分布式仿真算例。
A typical four-bar mechanism and a typical slide-crank mechanism are used for test of the distributed simulation environment and applications developed in this thesis.
应用推荐