发动机的动力机构实际上就是曲柄连杆机构。
The power mechanism of the engine is actually called the crankshaft and connecting rod mechanism.
摇动筛依靠曲柄连杆机构使筛箱作往复运动。
Shaking screen on crank-connecting rod for reciprocating motion to the sieve case.
本文介绍了一种采用双曲柄连杆机构的高速单缸柴油机。
A single-cylinder high-speed diesel engine with dual symmetric crank-conrod mechanism was developed and tested on a dynamometer test bed.
本系统的应用，快捷有效地支持了曲柄连杆机构的设计开发。
The application of this system supports the development of crank-link mechanism promptly and effectively.
通过讨论，为热连轧曲柄连杆式飞剪设计研究提供一些思路和方法。
Some methods and ideas for design of crank and connecting rod type crop shear in hot strip mill are supplied in this paper.
采用四柱式双寻向和曲柄连杆同步平衡机构，保证冲裁区域受力均匀。
Four-column type double-direction guiding and crank connecting rod synchronized balance mechanism are adopted to guarantee equal force in the cutting area of machine.
在高压条件下，通过曲柄连杆机构的变速运动实现钻井泵动力的传递。
Through the crank link system in high-pressured condition of variable speed movement with drilling pump power transfer.
本文提出一种计算曲柄连杆机构参数偏差对内燃机平衡性能影响的方法。
This paper provides a method for calculating the influence of parametric deviation of crank gear on balancing quality of internal combustion engines.
本实用新型公开了一种锻压机械设备压力机曲柄连杆上使用的压力机组合轴承。
The utility model discloses a forcing press combination bearing used on the forcing press crank connecting link of metal forming mechanical equipment.
阐述了曲柄连杆滑块机构的建模、优化设计计算的过程，并分析比较了其优化结果。
Modeling of crank shaft connecting rod slippery piece mechanism and process of optimization design were introduced, and its optimized result was analyzed and compared.
本机床的启动与停止用一多片式离合器控制，滑枕的往复运动通过曲柄连杆机构实现。
The start and stop of the machine are carried out by a multiple-disk clutch and the reciprocation of the ram is achieved by a crank connecting link.
一个指节到指节拉杆之间的连续性提供了车轮，而拉杆提供给贝尔曲柄连杆(必文臂)。
A knuckle-to-knuckle Drag link provides continuity between the wheels, while the Tie Rod provides linkage to a Bell Crank (Pitman Arm).
本课题设计的加热炉前方坯取料装置，采用液压缸驱动曲柄连杆机构，完成钢坯的升降、平移。
The issue before the billet furnace designed for device, a hydraulic cylinder-driven crank linkage, the completion of the billet movements, translation.
讨论了曲柄连杆机构运动功能可靠性的概念，并分析了造成该机构运动功能丧失的各种磨损因素。
The concept of reliability of function for crankshaft-connecting rod system is discussed, and the wear-out factors which make system function lost are analysed.
本实用新型公告了一种电磁制动装置，包括具有滑块的曲柄连杆式机械增力机构、盘式制动器；
The utility model discloses an electromagnetic braking device, which comprises a crank connecting link-type mechanical reinforcement mechanism with a sliding block and a disk brake.
本文阐述了6105QB型柴油机的运动计算及动力计算，分析了该机型曲柄连杆机构的受力特点。
This article presents the calculating of kinematics and dynamics for model 6105QB diesel engine. And analyses the character of force that exerted on the crank and rocker mechanism inside the engine.
本发明解决了现有的曲柄连杆机构式燃油发动机存在工作效率低、易出现故障、外形体积较大的问题。
Problems like low work efficiency, easy fault and large volume of outline of figure of existing crank-connecting rod mechanism fuel engine can be solved through the invention.
这种液压驱动隔膜泵动力端与传统隔膜泵动力端相比，把传统动力端的曲柄连杆机构设计为液压缸驱动机构。
Compared with the driving force used in the traditional diaphragm pump, the hydraulic-driven replaced the crank linkage driven with a new type of hydraulic cylinder.
在发动机维修中，曲柄连杆机构的维修是重中之重，它的维修好坏对发动机的正常工作和使用寿命有很大的影响。
In the engine repairs, the repair of crank rod system is very important because it affects the normal work and service life.
在常用于稳态仿真的容积法模型基础上，结合曲柄连杆机构的动力学模型，建立了二冲程柴油机的扭矩预测模型。
Based on control volume model often used for steady state simulation and crank-connecting rod model, a torque generation model for a two-stroke diesel engine was established.
布料：独特压球机曲柄连杆结构，强制下料装置，彻底解决了异型砖布料难题，二次布料可生产各种彩色路面砖。
Fabric: unique crank and connecting rod structure, mandatory under the feeding device, completely solved the problem shaped brick cloth, the second fabric can produce a variety of colored road brick.
在分析摩托车发动机曲柄连杆机构不平衡力的基础上，结合国内和国外的实践，总结了摩托车单缸发动机的基本平衡方法。
Based on analyzing the unbalanced force of crank-connecting rod mechanism, this paper describes the balance of motorcycle single-cylinder engine according to practices home and abroad.
本文分析了内燃机曲柄连杆机构往复运动件的高谐次运动对轴系惯量变化和固有频率的影响，并对一多缸机轴系进行了扭振计算。
The effects of high order motions of reciprocating parts on the variation of inertias and natural frequencies of crankshaft system are discussed in this paper.
为此，本文提出了“平移燃烧”理论及其“某机构”和“贮能连杆”机构的设想，抛砖引玉地力求解决曲柄连杆机构这个致命弱点。
Therefore, we put forward a theory of translation combustion and some tentative ideas such as developing a special mechanism and a connecting rod which can store energy in this paper.
为了提高车辙测试的自动化程度，在进行车辙试验时方便地控制测试小车的行程，用步进电机驱动小车代替传统的曲柄连杆机构驱动；
To increasing the automation degree of rut tests and controlling the small car route conveniently, a stepper motor replaces the traditional crank connecting rod organization for small car drives;
本文将曲柄连杆压力机与液压增力压力机的特点作比较，并介绍液压增力压力机和正交增力机构的工作原理，进行正交增力机构增力系数的计算。
A crack press was compared with hydraulic force increasing press and the schematics of them were introduced, a force increasing ratio of the orthogonal force amplifier was calculated.
往复式压缩机使用的是活塞、曲柄、连杆机构或活塞、曲柄、滑管机构，旋转式压缩机使用的是转轴曲轴机构。
Reciprocating compressors is using the piston, the crank, link mechanism or the piston, the crank, sliding tube institutions, rotary compressor rotor is the use of crankshaft institutions.
这一机构有一系列部件组成，如曲柄箱、气缸体、活塞、连杆、曲轴等。
The mechanism consists of several parts like crankcase, cylinder block, pistons, connecting rod, crankshaft, etc.
在连杆大头安装曲柄轴颈。
The lower end of the connecting rod fits the crankshaft journal.
在连杆大头安装曲柄轴颈。
The lower end of the connecting rod fits the crankshaft journal.
应用推荐