因此,晶化动力学成为非晶合金研究领域的热点之一。
Therefore, the crystallization kinetics become one of the hottest fields in research of amorphous alloys.
与一步法热处理相比,采用两步晶化热处理有利于提高微晶玻璃的力学性能。
Compared with one-step crystallization heat treatment, the two-step crystallization heat treatment is helpful to improve the mechanical properties of glass-ceramics.
用DSC法测定了制备态合金的晶化温度。
Crystallization temperature of the as-quenched alloys were measured by DSC.
稀土的加入可以提高晶化温度和镀层性能。
Addition of re may increase crystallizing temperature and improve film properties.
提出了连续激光非晶化进一步研究的方向。
The further research direction of CW laser glazing is proposed.
研究了PAA模板的晶化行为和相转变过程。
Crystallization process and different phase transitions of PAA template were investigated.
磷掺杂导致沉积时晶化率降低,但对固相晶化有利。
Phosphorus doping degenerates the crystalline ratio of deposited film but benefits recrystallization.
因此,在非晶的机械晶化过程中需要考虑压力的作用。
Therefore, the effect of the pressure should be taken into account in the mechanical crystallization of amorphous materials.
而非晶合金晶化法是纳米晶材料的主要制备方法之一。
Nano-crystallization of metallic glasses is an effective way to prepare nanocrystalline materials.
对非晶合金电沉积镀层的晶化温度和硬度进行了测定。
The crystalline temperature and the hardness of the amorphous electro-depositional coating were determined.
该非晶合金出现晶化的温度随热处理时间的增长而降低。
It has been found that as the heating time increases, the crystallization temperature of the amorphous alloy will decrease.
以煤系高岭岩为原料,采用水热晶化法合成超细莫来石粉。
Mullite particles was synthesized by hydrothermal crystallization from kaolinite in coal measures.
结果表明:分形晶化过程中晶核长大效应明显影响分形体结构。
The results indicate that the growth effect of nuclei strongly influences the fractal structure during crystallization.
提高反应温度和延长反应时间,均有利于锰锌铁氧体的晶化过程。
The crystallization process can be prompted by increasing the reaction time and temperature.
这种铁物种的结构和完全晶化后分子筛中的骨架铁物种结构类似。
This iron species has similar tetrahedral coordinated structure compared to the fully crystallized framework iron sites in the Fesilicalite.
结果表明,激光能量对非晶薄膜的晶化和纳米晶粒尺寸有重要影响。
The results indicate that the energy of the annealed laser have important effect on the crystallization of the films and the size of nanoparticles.
探讨了脉冲电流对大块非晶合金的结构驰豫和晶化转变行为的影响。
The influence of high-density pulsing current on the structural relaxation and crystallization behavior has been discussed.
结果表明,快淬后磁粉的显微结构与快淬速度和晶化温度密切相关。
The result indicated that the microstructure of the powder is clearly related to quenching velocity and crystallizing temperature.
玻璃衬底与非晶硅膜之间的非晶氮化硅膜对非晶硅膜的晶化没有明显影响。
The amorphous silicon nitride film between amorphous silicon film and glass substrate is found to have no any effects on the crystallization.
观察到非晶合金的晶化温度,磁有序温度和平均磁超精细场有规律性的变化。
The regular variation of crystallization temperature, magnetic ordering temperature and average hyperfine magnetic field of the amorphous alloys with Nb content were observed.
本文主要研究了氟硅酸盐微晶玻璃的组成、晶化机理和性能三个方面的内容。
Compositions, crystallization mechanisms and properties of the fluosilicate glass ceramics were investigated in this paper.
电场增强方式的时间常数比非电场增强方式小,表明加电场有促进晶化的作用。
Raman spectra and x-ray diffraction spectra of annealed thin film showed that electrical field enhanced the MILC crystallization effect.
介绍了一种非晶硅薄膜低温晶化的新工艺———金属诱导非晶硅薄膜低温晶化。
We developed a new process for low temperature crystallization of amorphous silicon films, by metal induced crystallization of amorphous silicon films at low temperature.
结果表明,晶区的非晶化转变是原丝在预氧化过程中组织结构演变的主要形式;
The results show that amorphization of crystallite is the main form of microstructural evolution during thermal stabilization of PAN fibers.
通过对非晶态样品的热分析,确定了它的晶化温度、玻璃转变温度和低温弛豫温度。
The thermal analysis was used to determine the crystallization temperature, the glass transformation temperature and low temperature relaxation temperature of the amorphous samples.
然后将绝缘外壳放入马弗炉中进行微晶化热处理,大大减少了生产工序和生产周期。
Then the enclosure is put into the muffle furnace where it would be crystallized, thus the production process and production cycle are greatly reduced.
实现钢铁材料表面自身纳米晶化的主要方法有超声喷丸、高能喷丸和机械研磨处理等。
Three methods of surface self-nanocrystallization for iron and steel are ultrasonic shot peening, high energy shot peening and surface mechanical attrition treatment.
在微晶玻璃的生产中,微晶玻璃板在由玻璃颗粒烧结、晶化以后会出现板面变形的现象。
In the glass-ceramic production process, glass-ceramic plates often deformed after glass powder was sintered and crystallized.
本论文以铜锆基大块非晶合金为研究对象,研究了其非晶形成能力、晶化行为和力学性能。
The glass forming ability, the behavior of crystallization and mechanical properties of the Cu-Zr-based bulk metallic glasses have been investigated.
本论文以铜锆基大块非晶合金为研究对象,研究了其非晶形成能力、晶化行为和力学性能。
The glass forming ability, the behavior of crystallization and mechanical properties of the Cu-Zr-based bulk metallic glasses have been investigated.
应用推荐