不是所有的匀胶机都叫旋涂仪的！
光刻胶的旋涂与烘烤，薄膜材料制备。
Photoresist coating preparation and baking; Thin film preparation.
探索旋涂法制备工艺参数对薄膜结构的影响。
The influence of processing parameters in spin-coating was explored.
凯亮100是一台台式多功能旋涂镀膜系统。
The Chemalux 100 Multi-Functional Spin Coating System is a table-top coating system.
利用光密度曲线模型优化可写光盘的染料旋涂工艺。
An optical density curve model for optimizing the dye coating process of recordable disc is introduced.
另外，旋涂速度、非探测气体等条件都会对气敏性有较大的影响。
In addition, the experimental conditions, such as spin-coating speed and undetectable gas had a greater impact to the gas sensitivity.
聚酰亚胺的成膜厚度取决于聚酰胺酸（PAA）的粘度及旋涂转速；
The thickness of PI layer depends upon the viscosity of PAA and the spin speed of coating;
若使用旋涂法，就是在金属膜的上面旋涂一层UV树脂并用UV固化。
If the spin coating method is used, a UV-resin is spun on top of the metal film and cured by UV-exposure.
依据实验给出旋涂工艺的简化模型，并运用旋转圆盘理论分析流体流动。
A simplified model of the coating process is given on the basis of experiments and the dye coating process is studied with the rotating disk theory.
依据实验给出旋涂工艺的简化模型，并运用旋转圆盘理论分析流体流动。
The experiments indicate that PIV technology could be used on the flow measurement of the rotating cavity.
测试结果表明：利用该模型所得到的预测膜厚与旋涂的实测膜厚基本相符。
Test results show that the prediction values gained by using this model are consistent with the measured ones.
采用旋涂-热解工艺，以双亲嵌段共聚物F127为软模板剂，合成出WO3薄膜。
The WO3 film is prepared by the Spin coating-Pyrolysis method with the amphiphilic block copolymer F127 as the soft template.
微电脑（PLC）控制系统集成了自动的高压水冲洗功能和精确的多层旋涂镀膜功能。
The PLC (microcomputer) controls system integrates automatic high pressure water washing with precise multi-layer spin-on coating.
由于自身刚性的三维结构，它们能够通过溶液旋涂加工的方式形成均匀和无定形的薄膜。
They can form uniform and amorphous films via spin-coating due to their rigid three-dimensional architecture.
借助模型分析旋涂工艺中的许多重要参数，从而控制盘片质量，并最终实现闭环生产控制。
This model can be used as an analysis tool of many important parameters in the coating process, thereby control the disc quality...
与其他成膜方法相比，旋涂法制备的薄膜样品对热响应具有更高的灵敏度，更适合用作红外探测器材料；
The results show that pyroelectric response sensitivity of the film samples prepared using spin-casting method is higher and more suitable for infrared detectors than other methods.
应用最小二乘法，通过对中心复合设计实验数据的拟合，建立了旋涂法制备聚合物薄膜的膜厚回归模型。
In this paper, the regression model of the polymer film-thickness spin-coating is established by using the least squares and the experimental data fitting with central composite design.
结果表明，采用溶胶-凝胶旋涂法制备的ITO薄膜是由立方相纳米颗粒构成，随涂层增加，薄膜表面变得平滑。
The experimental results showed that it is absolutely feasible to fabricate ITO film on the quartz matrix by sol-gel techni.
本文中制备的具有梯度结构的聚合物发光器件发出光的强度，比用旋涂法和真空喷雾法所制备的单纯高分子发光器件和混合结构的高分子发光器件更高。
Compared to PLEDs composed of pure polymer or of blend active layers prepared by spin coating and vacuum spray methods, our PLED composed of gradient structure emitted brighter light.
在复合大门里，工人们穿着涂球衣，戴着焊接护目镜，旋入螺钉。回到纽约，绿诺科技的股票冻结在40美分上。
Inside the gated compound, workers in tarred jerseys and goggles weld and drive screws. Back in New York, Rino's shares are frozen at 40 cents.
在复合大门里，工人们穿着涂球衣，戴着焊接护目镜，旋入螺钉。回到纽约，绿诺科技的股票冻结在40美分上。
Inside the gated compound, workers in tarred jerseys and goggles weld and drive screws. Back in New York, Rino's shares are frozen at 40 cents.
应用推荐