从数据窗格中选择NotificationService项，单击Configure按钮，如图6所示(参见大图)。
Select the Notification Service entry from the data grid, and click the Configure button, as shown in figure 6 (see larger image).
该方法是将采样波形取绝对值，定义数据窗长度为半个周期。
It changes the sampling waves into absolute values and set half period as data window length.
这种算法具有所需数据窗的时间短、计算精度高和不受系统频率偏差影响的优点。
This algorithm needs shorter data window time and has higher calculation precision and is not affected by deviation of power frequency.
该算法的数据窗只需要一个基波周期，具有很好的快速性，理论上是一种精确算法。
The data windows just need one fundamental cycle, so this technique has high speed. In theory, the proposed technique is an accurate algorithm.
采用频率响应特性分析方法，对典型变数据窗阻抗算法的频域特性以及滤除非周期分量的能力进行了综合比较和分析。
The frequency performances and dc-offset rejection abilities of several typical variable-window algorithms are evaluated and compared based on the frequency-response analysis method.
在高速数据传输接口中，由于数据窗缩小以及传输路径不一致，造成数据和时钟信号在FPGA的接收端发生位偏移和字偏移。
Data may arrive at the FPGA receiver with channel -to -channel bit skew and word skew due to different trace length and smaller data window.
目前的各种算法存在硬件复杂、成本太高，或者所需数据窗长、计算量大，或者精度不够等缺点，很难满足诸多功能一体化的要求。
The current methods are either too expensive and complicated, or requiring long data window, or lacking enough accuracy, thus it is difficult to meet the requirements of functional integration.
劈窗算法是目前由热红外遥感数据获取陆面温度的主要方法。
Split-window algorithm is the main method to retrieve the LST by thermal infrared data.
如果总时间增加了，那么就不那么需要对采集的时域数据施加大的阻尼窗了。
If the total time is increased, then there is less need for a significant amount of damping window to be applied to the collected time data.
针对航空重力测量数据事后处理的特点，基于窗函数法设计了FIR数字滤波器。
Considering the characteristics of the processing of aerial gravimetry data, a FIR digital filter based on the window function is designed.
在存储多个数据状态的情况下，阈值电压窗被划分为状态的数目。
In the case of storing multiple states of data, the threshold voltage window is divided into the number of states.
以时间窗内数据的势能作为结构辨识依据，同时采用最小二乘支持向量机辨识系统参数，辨识速度快、精度高。
Structure identification depends on the potential of data in time window. parameter identification is based on LSSVM with fast speed and high precision of identification.
根据声波测井数据特点选取汉宁窗设计滤波器，根据FPGA的特征对滤波器系数进行了量化。
According to the data characteristics of acoustic logging, Hanning window was selected to design the filter. The filter coefficients were quantized following the FPGA's characteristics.
因该方法适用于仅有一个热波段的遥感数据，故称为单窗算法。
Since the method is applicable for the remote sensing data with only one thermal band, it has been termed as mono window algorithm.
这两种信号处理参数允许采集更多的时域数据，并且在用窗函数之前，总应该先试一下。
Both of these two signal processing parameters allow more time data to be collected and should always be explored prior to the use of the window.
劈窗算法是用这两个热通道数据演算地表温度的最常用方法。
Split window algorithm is the most common technique for retrieving land surface temperature from AVHRR data.
Generate按钮将准备并执行SQL语句，将由此产生的数据放入一个窗格中（在DataGrid选项卡上），或者放入单独的数据感知控件中（在DataControls 选项卡中）。
The Generate button will prepare and execute the SQL statement, and place the resulting data in a grid (on the Data Grid tab) or in individual data-aware controls (in the Data Controls tab).
对于批处理来说，尤其如此，其中的应用程序必须在某个不断缩小的时间窗内处理大量的数据。
This is especially true for batch processing, where applications must process vast amounts of data within some narrowing window of time.
利用时间窗数据和频率窗数据所进行的联合时-频反演，缩小了拟合差，提高了定量解释精度。
The fitting difference is reduced and the precise of quantitative interpretation is improved by means of joint TF inversion with time and frequency window data.
结合本系统的特点，使用FPGA分别实现了数据的译码、加窗、存储、FFT、PSD和结果输出。
According to the characteristic of our system, data decoding, windowing, saving, FFT, PSD, and result output is performed by FPGA.
分组判决算法利用检测窗内所有数据帧，在广义似然比准则下对相关模板进行联合估计，进一步压制了模板噪声。
The group decision algorithm based on GLRT principle was utilized to estimate correlation template through all data frames in detection window and could offer better noise suppression.
所得估计的渐近结果为求渐近最优方案以及直接从数据估计最优变窗宽提供了理论基础。
The asymptotic results of the estimation provided a theoretical basis for finding the asymptotic optimal scheme as well as estimating the optimal variable bandwidth directly from the data.
相反，“SQL”窗格中的数据和关键字必须始终是ANSI(美国)格式。
In contrast, data and keywords in the SQL pane must always be in ANSI (U. S.) format.
演示如何将操作窗格上的控件绑定到数据。
Demonstrates how to bind controls on an actions pane to data.
“结果”窗格显示包含由查询或视图检索的数据的网格。
The Results pane shows a grid with data retrieved by the query or view.
例如，如果“区域设置”设置为“标准德语”，则可以在“条件”窗格中以类似“31.12.96”的格式输入数据。
For example, if your Regional Settings are set to Standard German, you can enter data in the Criteria pane in a format such as "31.12.96."
在“网格”窗格中，定位到包含用作排序依据的首个数据列或表达式，然后在“排序类型”网格列中，选择“升序”或者“降序”。
In the Grid pane, locate the row containing the first data column or expression to sort by, and then in the Sort Type grid column, choose Ascending or Descending.
劈窗算法是用这两个热通道数据演算地表温度的最常用方法。
Split window algorithm is the most common technique for retrieving land surface temperature from AVHRR data. Several split window algorithms have been developed in the last two decades.
将数据库从主系统移动到辅助系统的方法因情况而异，但是这个过程总会产生一个时间窗，在这个时间窗内，数据还没有完成从一个系统到另一个系统的迁移。
The method of moving database changes from the primary to the secondary system varies, but the process produces a window of time during which data has not migrated from one system to the other.
左边的窗格显示了树形的层级结构，它描述了数据在文档中是如何以层级结构安排的。
The left hand pane shows a tree structure that depicts how the data is hierarchically placed in the document.
应用推荐