用实验数据拟合了模型参数。
The parameters of the model were estimated by experimental data.
根据试验数据拟合出合理充液率的经验关系式。
Based on experimental data, empirical correlation on filling ratio was obtained via regression.
提出的气浮采收动力学模型与实验数据拟合良好。
A dynamic harvesting model, which fits the experiment data quite well, is also presented.
设计了普朗克常数测定实验的计算机数据拟合程序。
The data fitting program of computer is designed for the experiment for measuring Plank constant in the paper.
通过数据拟合，得到了沸腾换热系数的经验关系式。
The correlations of boiling heat transfer coefficients are obtained.
通过导纳圆实验数据拟合，获得相应的等效电路参数。
With admittance circle fitting to experiment data, equivalent circuit parameters can be obtained.
计算观察数据拟合每个竞争模型的剩余平方和及自由度；
Caloulating the residue sun of square and degree of freedom under each of fitted models.
实验表明SVM是分类和数据拟合建模的十分优越的方法。
It is shown that SVM is an excellent method in classification and data modeling fitting in practice.
提出了复合增程弹起始飞行段弹道多普勒雷达数据拟合方法。
The Doppler Radar data fitting method of the first flight segment trajectory in a free flight test of rocket assisted and base bleed projectiles was presented.
根据试验数据拟合出了齿板滑移承载力关系式及相应曲线图。
On the basis of experimental data to fit function of relationship of carrying capacity and slide and the corresponding curve.
利用数据拟合方法研究剑杆织机控制系统中的开车痕补偿问题。
The start mark compensation of the loom system is studied by means of digital synthesize for the first time in this paper.
根据调频函数模型，提出利用数据拟合的方法设计非线性调频信号。
According to the frequency modulation function mode, this paper proposes to design the nonlinear frequency modulation (NLFM) signal using the data fitting method.
PCNONLIN程序进行药物动力学房室模型数据拟合和参数计算；
The modelling data were performed with a compartment pharmacokinetic modelling program (PCNONLIN).
从零件加工成本与公差关系的现有统计数据拟合得到普遍表达式用于本模型。
A general expression relating the cost of component processing to the tolerance is obtained by fitting to existing data.
数据拟合问题在日常生活中经常遇到，点的拟合可以通过插值等方法来实现。
Data fitting is frequently used in our life. The points fitting process can be achieved through interpolation methods.
该系统包括资料预处理、数据拟合、滑动外推、聚类分析、综合评判等多个环节。
This system includes many links, such as: data pre-processing, data fitting, sliding extrapolation, clustering analysis and synthetic evaluation.
通过测试数据拟合的稳态功率-电流方程，为设计红外模拟系统控制方案提供依据。
The steady state power-electric current equation by test data fitting provides the basis to design controlling project of infrared simulator.
然后，进行数学模型计算结果与岩样实验数据拟合，确定了数学模型中的待定系数。
Then undetermined parameters in mathematic model are confirmed by fitting mathematic model results to rock experiment data.
考虑了几个主要经济因素对居民用电量的影响，并用历史数据拟合出用电量多元线性回归模型。
This paper considers the effects of some economic factors to residential electricity consumption, and builds the multiple liner regressive equations MLRE using historical data.
对实验数据进行数据拟合，线性拟合度达到0.97，进一步证明了该方法的可行性和有效性。
Carries on the data fitting to the experimental findings, and the linearity is up to 0.97, which indicates the feasibility and validity of this method.
该系统针对实时传送的数据，加以数据拟合分析，实现了对水轮机本体各个组件的温度在线监测。
The monitoring system carries out the fitting analysis based on the acquired data to realize the online temperature monitoring of hydroturbine components.
实验证明，利用该这个公式，再通过车辙预估方程计算的车辙与直道实测车辙数据拟合情况较好。
And the results from rutting predict-equation with the the equation of axle load conversion under heavy-load fit the testing results well.
该文采用机理分析和数据拟合的方法，建立330MW机组滑压运行下大负荷变化范围内的模型。
The 330mw simplified unit model, running in sliding pressure condition with a large load variation is constructed by means of the mechanism analysis and data fusion methods.
给出了陶瓷材料的动态抗弯刚度模型和动态抗弯强度模型，并利用试验数据拟合得到了模型中的参数。
The dynamic flexural rigidity model and dynamic bending strength model of ceramic were also provided and the material parameters used in the model were obtained by fitting the experimental data.
该数据库具有各种缓冲材料数据拟合、绘制、存储、管理等功能，有助于实现包装实验室数字化管理。
The database has the function of curve fitting, protracting, storage, and management, and is useful for digital management of packaging lab.
对于短时间内的剧烈放气过程，是根据放气后的抽气试验数据拟合出抽气曲线，以此反算放气量的大小。
For an acute outgassing course in a short time, a fitting curve is obtained according to the pumping data after outgassing, so the outgassing amount is obtained from the curve.
进而，本文对所设计的太阳敏感器进行了系统误差分析，采用数据拟合方法，建立了系统的误差补偿模型。
Then, the error of the system is analyzed, and the error compensation model is established. A mathematical calibration method is presented for the system residual errors.
由测量数据拟合出了球形探头在工频电场和冲击电场作用下的变换特性曲线，得到了探头变换特性的关系式。
Through the experimental data processing, the curve of the transfer characteristic and the relationship equation are gained in this paper.
实证分析表明，用突变模型得出的结论与数据拟合得出的结果大体一致，这说明突变理论应用于此领域是可行的。
Empirical analysis indicates that conclusion and data based on catastrophe model roughly consists with fitted results, which means the catastrophe theory is feasible in this field.
实证分析表明，用突变模型得出的结论与数据拟合得出的结果大体一致，这说明突变理论应用于此领域是可行的。
Empirical analysis indicates that conclusion and data based on catastrophe model roughly consists with fitted results, which means the catastrophe theory is feasible in this field.
应用推荐