在后面还有数值轴，越限制饱和度范围(磁盘的半径)的，因此，较小的磁盘。
The farther down the value axis, the more restricted the saturation range (the radius of the disk) is and, therefore, the smaller the disk.
工作表中间的数据抗张强度沿着“数值轴”数值轴：显示刻度数值的图表坐标轴。
The data in the center of the worksheet (tensile strength) will be plotted along the value axis (value axis: a chart axis that displays scaled numerical values.)
如果更改数值轴之后，数值轴变得小于数据点的大小，则可以使用此属性设置是否显示数据标签。
If you change the value axis in such a way that it becomes smaller than the size of the data points, you can use this property to set whether to show the data labels.
如果你在y轴的方向上移动，函数值将匀速地减少。
If you move in the y direction, it decreases at a constant rate.
您可以为点和线定义您自己的类，以便您可以提供双精度值而非整数值的参数以及z -轴。
You define your own classes for point and line so that you can provide all arguments as double values instead of integers and so that you can provide a z-axis.
坐标轴显示单位必须是大于0的数值或者是在“显示单位”列表中预先定义的值之一。
The axis display unit must be a numeric value greater than 0 or one of the predefined values in the display units list.
柱状晶向等轴晶转变(CET)的研究具有重要意义，数值模拟是其有效的研究方法之一。
It is of great significance to the research of columnar-to-equiaxed transition (CET), and numerical simulation is one of the valid methods.
研究结果为优化和设计汽车半轴楔横轧设备提供了有效的数值分析方法和理论依据。
The study provides effective numerical analysis method and theoretical basis for the design and optimization of automobile semi axle cross wedge rolling.
文中建立了轮轨蠕滑力、自由轮对和两轴车的键图模型，并给出了部分数值计算的结果。
The bond graph models of wheel-rail creep forces, of free wheel set, and of two-axle vehicle are developed with associated numerical calculations.
对双曲余弦高斯光束通过光阑透镜分离系统的轴上光强分布做了详细的数值分析。
The axial intensity distribution of Hermite-cosh-Gaussian (HChG) beams passing through a system with the aperture and lens separated is studied numerically.
坐标轴上显示的单位必须是大于0的数值或预定义的名称之一。
Axis display units must be a numeric value greater than 0 or one of the predefined names.
结果表明，该数值模型及计算方法能够较好地反映混凝土在单轴荷载作用下的力学特性。
It is shown that that numerical mode and calculation means are used to simulate the mechanical behaviors of concrete in uniaxial load.
通过计算机数值模拟分析研究了锚杆支护回采巷道围岩应力分布、围岩变形、锚杆轴力及顶板离层规律。
By computer simulation, we analysis and study the law of wall rock stress distribution, deformation, the axial force of bolt and the roof-off-strata.
基于数值模拟的方法，分析了凸台轴的自由冷镦和开式冷镦两种加工方法。
Base on the method of numerical simulation, both free cold forging and opened cold forging of shaft with boss were analyzed.
对单轴介质加载槽波导的色散特性进行分析，给出了数值结果。
The dispersion characteristics of the groove waveguide loaded with uniaxial substrates are analyzed, the numerical results are given.
本文通过盐岩三轴蠕变实验、理论分析和数值计算研究了盐岩的非线性蠕变损伤机理。
The nonlinear creep damage mechanism of rock salt is investigated with triaxial creep tests, theoretical analysis and numerical simulation in the study.
用试验与数值计算方法研究了普通方钢管混凝土柱的轴压承载能力。
The enhancement of the axial bearing capacity of ordinary square concrete-filled steel tubes was investigated experimentally and numerically.
采用物理模拟和数值模拟相结合的手段，对汽车花键轴的温热控制精锻工艺进行了深入的研究。
Warm-hot control forging process of automobile spline shaft is investigated by using physical simulation and numerical simulation.
采用该模型，成功地对平面应力条件下岩土材料单轴受压和单轴受拉试件的局部化破坏分别进行了数值模拟。
Shear band formation due to void nucleation and growth were successfully simulated in a specimen of geomaterial under plane stress compression and tension by the model respectively.
给出了轴上光场的相速度和群速度、加速电位及电子能量增益等的解析表达式，并作了数值计算和分析。
The analytical expressions for the phase and group velocities of the axial optical field, accelerating potential and energy gain etc. are derived and are used to make numerical analysis.
基于畸变进气下压气机实验特性，数值模拟了畸变进气下双轴涡喷发动机的总体性能。
Based on experimental properties of compressor under inlet distortion, the performance of twin-spool turbojet engines is studied in this paper by means of numerical simulation.
如果您变更数值座标轴，使它变得比资料点的大小还要小，就可以使用这个属性来设定是否要显示资料标签。
If you change the value axis in such a way that it became smaller than the size of the data points, you can use this property to set whether to show the data labels.
本文采用随机骨料模型和双折线损伤模型相结合，在细观层次上对混凝土在单轴荷载作用下的力学特性和破坏机理进行了数值研究。
In this paper, the random particle model and double lines damage model are used, and uniaxial mechanical properties of concrete and the damage mechanism are integrated on meso-level.
基于砂土的常规三轴试验，利用岩土本构关系的数值建模方法，建立砂土的弹塑性本构模型。
Based on the conventional triaxial experiments for sand, the elastoplastic constitutive model of sand is built up through the numerical method of modeling the constitutive law for rock and soil.
利用数值计算详细分析和说明了偶数模厄米高斯光束的轴上光强分布和焦移。
The axial intensity distribution and focal shift of H-G beams with even mode Numbers are analyzed and illustrated with detailed numerical examples.
通过数值试验论证了利用多个断层面随机取向的地震的P、B、t轴推断构造应力主轴方向的可能性。
A numerical computation test shows the possibility of inferring the principal axes of tectonic stress from the p, b, t axis of earthquakes with randomly oriented fault planes.
通过数值试验论证了利用多个断层面随机取向的地震的P、B、t轴推断构造应力主轴方向的可能性。
A numerical computation test shows the possibility of inferring the principal axes of tectonic stress from the p, b, t axis of earthquakes with randomly oriented fault planes.
应用推荐