支承旋转或往复运动的轴的支承件叫轴承。
Supports provided to locate revolving or reciprocating shaft.
可调节套环可提供用于附加支承件的锚定点。
An adjustable collar may provide an anchor point for additional support.
此外优选地，支承件在其沿着路径侧向移动时倾斜。
It is also preferred that the support tilts as it moves laterally along a path.
每个面板可以包括多个装饰条和多个支承装饰条的横向支承件。
Each panel may include a number of decorative strips and a number of transverse supports supporting the decorative strips.
一般包括牵引件、承载构件、驱动装置、张紧装置、改向装置和支承件等。
Generally include traction, bearing structure, the driving device, tension device, and supporting device etc redirection.
从计算结果分析了该机床支承件薄弱环节，并对卧式拉床结构提出了设计改进的建议。
The weak links of the bed are found by the analysis and a proposal for improving the structural design of broaching machines was presented.
设置有容易替换的电线支承件或保护帽，以提高从一单相传输结构到一三相传输结构的可变换性。
It is provided with easily replaceable wire support members or protective caps to enhance convertibility from a single phase delivery configuration to a three phase delivery configuration.
这例如可以通过可在合适的导轨上移动的轴承或者通过在多个非等长的摇臂上安装支承件来实现。
This can be achieved, by example, by bearings that are moveable on suitable guides, or by mounting the support on a plurality of pivot arms of unequal lengths.
研究主轴电极头所受的液体阻力，为主轴支承件的有限元分析和优化设计提供详实可靠的理论依据。
Researching into the force will provide the detailed and reliable basis for the analysis of finite element method and optimal design of strut member.
卷筒止动件(33)沿所述一侧壁的壁面移动，可与嵌合于所述轴承部的卷筒支承件(27)卡合。
A reel stopper (33) moves along the wall surface of the one side wall and can engage with the reel receiver (27) fitted to the shaft receiving portion.
gossl Harald：用于输送装置的踩踏单元的台阶支承件或平板支承件、踩踏单元、以及输送装置。
Step support or plate support for tread units of a conveying device, tread units and conveying device.
讨论了机械手手指尺寸对手指夹持误差的影响；阐述了根据机械手夹持误差设计V型手指尺寸的方法；给出了夹持工件的下限以及工件与支承件之间的干涉条件。
This paper discusses the influence of finger size of a manipulator on its holding errors, and describes how to design the V-type finger size based on the holding errors.
回转支承是工程机械行业的重要基础件。
Slewing bearings are basic components widely used in construction machinery industry.
介绍了支承圆盘零件的成形工艺及模具结构设计，对工艺程序安排和模具结构设计提出了合理的解决措施。
Introduced forming process and die structure design of the support dish, putf orward the reasonable solution for the forming process arrangement and die design.
驱动箱动作平稳、准确，可同时作为被测件的支承平台。
Driving box operates smoothly and accurately and it is enabled o be used as the working table for the measured piece.
提出了动静压混合滑动轴承支承-转子运动轨迹的控制技术和方法，以期用于转子振动控制和非圆截面零件加工。
Based on active hybrid sliding bearing-rotor system, the control technique of the motion of the rotor was researched, which could be used for vibration control or non-circular machining.
提出了动静压混合滑动轴承支承-转子运动轨迹控制技术和方法，以期用于转子振动控制和非圆截面零件加工。
Based on active hybrid sliding bearing-rotor system, the control technique of the motion of the rotor was studied, which then was used for vibration control and non-circular machining.
引导件(4)由壳体(1)支承，并包括与电流条(3)的至少一个表面相连接的引导表面。
The guide (4) is supported by the housing (1) and comprises guide surfaces that connect with at least one surface of the current bar (3).
通过支承座零件的工艺分析和模具设计，介绍了液态模锻技术在复杂零件上的应用。
Through the technology analysis and die design of the support saddle, the application of the liquid die forging technique for complicated parts was introduced.
讨论了系统支承角、系统频率比以及系统质量比等对易损件加速度及位移响应的影响规律。
The effects of the angle of the tilted support, the frequency ratio and mass ratio of the system on the response of acceleration and displacement were discussed.
主要叙述了数控进给系统的传动设计及主要传动件滚珠丝杠及其支承的设计计算。
It specifies the driving design and important driving accessory -ball bearing and it, s bearing of the entering system of NC machining center.
其中包括气悬浮测振支承理论的基础、气体静压轴承的设计、关键零件的技术要求和加工工艺等。
After the theoretical basis of air-bearing system, the design of air static pressure bearing and the technology of key accessory are stated.
在点式支承玻璃建筑中，金属连接件的承载性能对整个结构的承载性能有很大影响。
Test was made on loading properties of metal connectors in the point supporting glass structure of the conservatory of Beijing Arboretum.
必须有效控制支承辊两侧轴承座的间距、保持密封件唇口良好接触状态及采用性能、尺寸合格的备件。
To control the clearance between both sides of bearing chuck in back-up roll, keep sealing tips in a good touching state and use correct spare parts both in function and dimension.
往往其中一个构件固定，轴承起支承运动件的作用。
Often one of the members is fixed, and the Bearing ACTS as a support for the moving member.
轴，支承转动零件并与之一起回转以传递运动、扭矩或弯矩的机械零件。
The axis, the supporting rotation components and rotates together with it transmits the movement, the torque or the bending moment machine parts.
支承辊轴承座是轧钢机上的关键零件之一，也是重要零件和加工周期长、难度大、精度要求很高的零件。
The backup roll chock is one of the key and important parts of the rolling mill.
轴系由轴本身、联轴器、安装在轴上的传动件、紧固件等各种零件以及轴的支承组成。
Axis system is made up of axis itself, transmission part installed on axis, connecting part and support of axis.
一种大型洗衣机主轴的密封装置，它是由支承装置、密封介质、注油孔、密封件等组成；
The utility model provides a main shaft sealing device for a large-size washing machine, comprising a supporting device, sealing medium, an oil feeding hole, a sealing element, etc.
支承辊轴承座是轧钢机上的关键零件之一，也是重要零件和加工周期长、难度大、精度要求很高的零件。
The backup roll chock is one of the key and important parts of the rolling mill. It has a long machining duration and the accuracy of the machining is very high.
应用推荐