注：切刀双气缸，放料摆杆双气缸。
Note: Cutting Knife use Double cylinder. Unwinding pendulum use Double cylinder.
以摆杆型游梁式抽油机为例，给出了分析过程和具体算例。
According to this exact analytical expression, the effect of every part of a beam pumping unit on cr...
介绍了摆杆零件成形工艺特点，分析了原成形工艺存在的问题。
This paper gives analyses of forming technique features of a rocking bar part and problems existed in former forming technique.
据此，提出了一种可快速、准确地检测和调整摆杆方位的方法。
After horizontal pendulum tiltmeter is fast and precisely adjusted by using this method given in this paper, tiltmeter operates in best position.
输入层分别为小车的位移和速度、摆杆偏离铅垂线的角度和角速度。
Input layer is respectively the displacement and speed of car, the Angle and Angle speed between pendulum bar and vertical line.
本文分析了试验过程中摆杆形变对柔性接头摆心、摆角数据的影响。
This paper analyzes the influence on the pivot point and deflection angle from the pendulum shaft's deformation in course of the test.
共轭凸轮、叉形摆杆和固定在叉形摆杆上的两个滚子组成共轭凸轮机构。
The conjugate CAM, a forked swing link and two rollers fixed on the forked swing link form a conjugate CAM mechanism.
共轭凸轮、叉形摆杆和固定在 叉形摆杆上的两个滚子组成共轭凸轮机构。
The conjugate cam, a fork-shaped swing rod and two rollers fixed on the fork-shaped swing rod form a conjugate cam mechanism.
结果表明，摆杆角度和小车位置的控制过程均具有良好的动态性能和稳态性能。
The simulation results showed the control process of pendulum Angle and cart position had good dynamic performance and stability.
提出了在倾斜固体潮观测资料中消除摆杆方位影响的实用公式，并用实例加以验证。
Pratical formulas of reducing the effects of the Pendulum beam in the observations are proposed by some examples.
锁销装置特点是：结构简单、可靠性好，为摆杆式的晒衣架提供了新型的锁销装置。
The lockpin device has the characteristics of simple structure and good reliability, and is a novel lockpin device provided for a rocker type clotheshorse.
在控制过程中，整个系统是在一个小范围内动态稳定的，实现了小车位移和摆杆的稳定控制。
During the control process, the whole system is dynamically stable within a small range. And the displacement of dolly and the stable control of the pendulum are controlled.
本文推导出水平摆倾斜仪摆杆初始平衡位置的计算公式，并对其精度及各参数的选取进行了分析。
In this paper, formulae of calculating best operating position of horizontal pendulum tiltmeter are derived, choice of precision and parameter are discussed.
控制目标是移动式倒立摆在二维平面内按指定的移动速度和转动角速度运动，并且保持摆杆平衡；
The purpose is to make the mobile inverted pendulum move at the reference translational speed and rotational speed in the two-dimensional plane while keeping its link being balanced.
压杆机构自动偏摆角度定位设计，使鞋子取放容易，长筒或半长筒操作上亦非常方便。
The automatic swing Angle positioning design of the strut mechanism makes it easy to remove shoes, especially in operation with boots or half boots.
研究结果表明：双杆摆系统有着丰富的混沌现象。
The study result demonstrates that the double pendulum system is of abundant chaos.
本文基于外加周期激振力信号作用首次对双杆摆机构的混沌运动进行了有效的控制。
In this paper, the chaotic motion of a double-pendulum is suppressed efficiently based on the method of periodic force.
旋转摆属于典型的欠驱动系统，通过驱动杆的水平转动可使欠驱动杆由垂直下摆位置转到竖直向上位置。
The rotating pendulum is a typical underactuated system with a rotating shaft of the motor attached to the end which is free to spin about an axis parallel to the axis of rotation of the pendulum.
当L形下摆臂、上摆臂、套筒支架和车架组成平行四杆机构时，双摆臂联动悬架能够保证车辆在行驶过程中具有较高的行驶稳定性。
A parallelogram linkage mechanism composed of L-shaped lower swing arm, upper arm and bushing support frame ensures travel stability of the forklift.
数值模拟结果表明，对不适于简化为扭转摆的钻柱系统，采用基于钻柱扭转杆模型的新方法进行设计可以取得相对较好的减振效果。
Numerical simulation shows that the new method is more effective for the drill-string assembly unsuitable to be simplified as a torsion pendulum.
热天金属杆膨胀，摆的底部变低，容器的底部也降低，而容器的水银膨胀后顶部升高。
In hot weather the rod expands; so the bottom of the rod is lower. The bottom of the vessel is also lower; but the mercury in it expands. So the top of the mercury is higher.
文中给出了特征球面四杆机构摇杆摆角公式，并结合实例绘制了摇杆摆角图谱曲线。
The rocker swing Angle equations of the characteristic spherical four-bar linkages are given in...
当该加工件顶推该触杆时，该触杆会连动该摆臂摆动至一计数位置；
When the workpiece presses and pushes the touch rod, the touch rod and the swinging arm can swing to a counting position;
当该加工件顶推该触杆时，该触杆会连动该摆臂摆动至一计数位置；
When the workpiece presses and pushes the touch rod, the touch rod and the swinging arm can swing to a counting position;
应用推荐