论文介绍了多功能总线控制器编码器的设计，编码器有六个模块组成，分别为位控制单元、FIFO单元、帧分界符单元、数据转换单元、CRC校验单元和曼彻斯特编码单元。
The paper describes the design of encoder which is divided into seven modules: bit control unit, FIFO unit, frame delimiter unit, data conversion unit, CRC unit, Manchester encoding unit.
API控制器的动作方法所返回的模型对象被编码成JSON，并发送给客户端。
The model objects that are returned from an API controller action method are encoded as JSON and sent to the client.
安装在计量阀侧边的集成电板可用于控制该独特的4通阀门和马达方向（在不使用旋转编码控制器时）。
An integral electronic board, mounted to the side of the valve, may be utilized to control the 4-way directional valve and motor direction (when not using a rotary encoder control).
本文介绍了变频空调控制器遥控系统的设计，通过有效的编码方式及接收滤波使红外通讯准确无误。
In this paper, a remote control system for DC-INVERTER air conditioner is introduced. By means of efficient coding and filtering, the infrared communication is robust.
由SFCD WARE软件、SS2000D编码器和数字化警报控制器组成的联邦指挥能够确保社区保护功能以更加简单的方式实现。
Consisting of the SFCDWARE software, SS2000D encoder and the Digital Siren Controllers, the Federal Commander makes protecting communities simpler.
该系统由数字控制器、脉宽调制波形显示电路、全桥变换器、直流电动机和光电编码器。
The system consists of a digital control system, a PWM control waveform display, a full-bridge converter, a DC motor and load motor.
正交编码分频多工接收器中一种具有一反交错记忆体和一控制器，而用来将已交错资料反交错的装置与方法。
An apparatus and method having a de-interleaving memory and a controller is used for de-interleaving interleaved data in a coded orthogonal frequency division multiplexing receiver.
其次作者采用光电编码器作为位置传感器并且利用了RS—232标准接口建立了多功能控制器与上位机的之间的位置信息传输；
The second one is to adopt optics encode as position sensor, and to use RS-232 criterion interface to make the multifunction control and PC communicate.
利用基于DSP的运动、压力控制器对编码器和传感器采集的数据进行高速处理，实现了对压铸机的实时控制。
Using movement & pressure controller based on DSP to make high-speed disposal on the data collected by the coder and the sensor, the real control on the die-casting machine was realized.
对IF M编码器进行了剖析，并介绍与之配套的LEC - 3型接口控制器。
The IFM encoder is analyzed and the associated LEC-3 Intetfacing controller is presented.
介绍了E6C2编码器的特点，并结合可编程序控制器的高速计数模块重点阐述了如何利用增量式编码器实现位置的精确定位。
This paper introduces the characteristics of E6C2 rotary encoder, and integrates high-speed counter block of PLC, explains how to use incremental rotary encoder to carry out the precise positioning.
利用PLC高速计数模块直接将外部编码器发出的脉冲读入，在PLC内部编程，通过程序控制完全能取代位置控制器的所有功能，从而省出位置控制器这一环节。
The pulse is directly read out by utilizing PLC high-speed counting module, the function of the locating controller can be achieved by program, thus the locating controller are saved.
根据机器人的运动模型构造了模糊控制器，采用变长度编码方法对规则编码，减少了染色体的尺寸和复杂度，提高了学习速度。
The fuzzy controller is constructed based on the kinematic model of the robot. Messy coding method is used to reduce the size and complexity of chromosome and increase the learning speed.
采用具有层次结构染色体编码方式的遗传算法来设计模糊控制器，实现了语言控制规则的自动生成和隶属函数参数的自动整定。
By using the genetic algorithms with hierarchical chromosome structures, rule generation and para - (meter) tuning of the fuzzy controller can be achieved simultaneously.
采用增量式光电编码器和可编程序控制器的全新设计，较好地解决了这一问题。
The new design with incremental encoder and Programmable Logical Controller works out a solution.
旋转编码器；可编程控制器；旋臂采样机；控制；回转保护。
Rotary code; PLC; Swing arm sampler; Control; Rotary protection.
旋转编码器转换成机械和工业PC输入成电子信号，控制器可处理的计数器，转速表，可编程逻辑。
Rotary encoders convert a mechanical input into electrical signals, which can be processed by counters, tachometers, programmable logic controllers and industrial PCs.
介绍在变频电梯中利用变频器和可编程控制器的内部功能来实现脉冲编码定位的一种方法。
A method for realizing pulse coding positioning in VVVF elevator is introduced in this paper, which makes use of the internal functions of PLC and inverter.
FPGA实现MV B控制器功能，分为曼彻斯特编码器、解码器、缓冲区、中央控制单元、内部存储器和单片机接口等几部分。
The FPGA is designed as a MVB controller which consists of Manchester encoder, Manchester decoder, buffer, center control unit, internal memory, MCU interface and so on.
台湾编码器制造厂，专业生产编码器、编码器光电元件、塑胶码盘、磁性编码器、计数器、或电脑连线计数器、电子码表、电脑控制器（电梯专用）。
Manufacturer of encoders. The products include various kinds of rotary encoder, encoder module, plastic disc, magnetic encoders, counters, online counters, and measuring wheels.
采用光电编码器作为角位置传感器，以有刷直流电机作为伺服系统的伺服电机，使用控制器MCL2805实现全数字伺服控制系统。
The system takes photo-electricity coder as Angle position sensor, using brush DC motor as servo motor. The full-digital servo system is based on controller MCL2805.
通过编码器对输入设备现场编号，使其可在报警控制器或火灾显示盘上显示具体的地址及工作状态。
Using programmer to on-site number input devices, in order to let them display their detailed address and operation status in the control panel or fire repeater.
通过编码器对输入设备现场编号，使其可在报警控制器或火灾显示盘上显示具体的地址及工作状态。
Using programmer to on-site number input devices, in order to let them display their detailed address and operation status in the control panel or fire repeater.
应用推荐