论述了将计算机仿真技术应用于翻车机控制系统开发的可行性，并给出具体仿真方案及编程框图。
The feasibility of applying this technique in the development of the control system of tippers is demonstrated with the concrete emulation scheme and a programming flowchart.
本文介绍了协同式三自由度运动平台计算机控制系统的硬件设计及实现方法。
This paper presents hardwares design and realization of computer control system of three degree - of - freedom motion platform.
本文主要介绍最近研制的露天矿卡车计算机调度系统和信息编码方式及差错控制技术。
In the paper, the truck dispatching system computer-based and the character code mode of encoding and the error control were introduced.
网络控制系统是控制科学和计算机网络及通讯技术的综合应用。
Networked control systems are integration of controlling science, computing network and communicating technology.
本文阐述了一个基于动态数学模型及启发式优化策略的连续加热炉计算机控制系统的设计与实施。
The design and implementation of reheating furnace computer control system based on the dynamic mathematical model and the heuristic optimization strategy is discussed in this paper.
介绍了控制循环锅炉的结构特点，水冷壁等系统的设计准则，水循环系统设计的计算步骤及设计中关键数据的选取。
The pressure parts construction, design criteria of water wall, calculation procedure of water circulation and selection of critical parameters for controlled circulation boiler are introduced.
目前基于计算机及网络的管理信息系统和自动控制系统已经很广泛地应用于各个行业的各个领域。
Management information system and automation system based on computer and net has been used in each field of each vocation widely at present.
以结构拟动力试验为例，详细说明了基于计算命令控制试验系统的建立方法及试验流程。
The calculation command control method and testing flow for structural pseudo-dynamic testing were described in detail.
本文叙述了冷藏柜试验室的设计要求及所采用的空调设计和计算机自动控制检测系统的设计。
This paper described a lot of the requirements about the design of service refrigerator testing room and to use the air—condition design and computer automatic control design.
设计了基于CAN总线的预焙铝电解槽计算机控制系统的总体方案及基于混沌优化的电解质温度模糊控制器。
The computer control system scheme of Aluminum electrolytic cell based on CAN bus and Fuzzy controller based on chaos optimization are designed.
因此，模型可实际用于建筑能耗分析、空调系统负荷计算、运行管理及动态控制。
Thus, the model is applicable to building energy consumption analysis, load calculation, operation management and dynamic control of air conditioning systems.
给出了PN寻的制导系统的控制弹道实际有效导航比的计算公式及设计准则。
The computation equation and design criterion of real effective navigation ratio of homing control trajectory in PN homing guidance system were given.
对小型水电站发电机组控制及励磁调节系统进行了设计计算、设备选型整定。
The design calculation of the generator set control and field adjusting system as well as the equipment lectotype setting for small water power station are performed.
本文介绍了一种简化方法，供设计多变量控制系统时计算补偿传递矩阵及补偿网络之用。
This paper presents a simplified approach to evaluation of compensation transfer matrix and compensation network for designing multivariable control system.
本文介绍其电气控制系统中计算机数据采集与记录的方案及软硬件设计特点。
This paper introduces the design characteristic of hardware, software and the scheme of data collection and record in its electrical control system.
多级节流系统是一套结合了机电技术及计算机控制技术的复杂设备。
The multiple throttling system is a set of complicated equipment combining electromechanical technology with computer-control technology.
本系统不仅弥补了传统荧光显微镜的功能缺陷，而且实现了系统的计算机控制及荧光图像的处理、光谱分析等功能。
This system not only remedied the function defects of the traditional fluorescence microscope, but also realized the computer control and the process and spectral analysis of the fluorescence image.
重点研究了这种仿真计算机系统的网络结构、协议与控制方式、系统时钟同步控制及在线故障诊断等问题。
The paper discusses the architecture of simulation computer based on microcomputer network, the communication protocol, the synchronization issues and the fault diagnoses of the simulation system.
网络控制系统是控制科学、计算机及网络技术的综合应用。
Networked control systems are integration of controlling science, computing science and networking technology.
本系统介绍了用微型计算机进行运行控制和信息采集及处理的三探头中子粉末衍射仪系统。
This paper introduces a neutron diffractometer system with three detectors in which the microcomputer is applied to control Instruments, collect information and process data.
传统银行卡内植入微型计算机芯片作为保安装置，用于控制通过电子银行及结算系统的支付。
A microcomputer embedded within a conventional bank card used as a security device on controlling payments via electronic banking and clearing systems.
在单片机及计算机的控制下，该系统可以实现弹丸速度的自动测试功能。
Under the control of single chip processor and computer, this system can measure the bullet velocity automatically.
另外研究了控制系统的硬件设计和软件编程及采用计算机控制的具体实现方法，较全面说明了复杂计算机控制系统的设计过程。
In addition, the hardware designing and the software programming, also the computer realization method, is studied, so the whole complex design process of the computer control system is studied.
在数控机床上附加测量头、控制盒、摄像头及计算机装置组成的测量系统，使数控机床具有一定的检测功能。
A measurement system, including probe, control box, camera and computer is embed into the CNC machine tool. This makes it possible that the machine tool have measuring function.
汽车加速工况仿真实验系统由发动机-测功机实验台架、模拟驾驶实验台和计算机数据采集及控制系统组成。
The vehicle acceleration simulation system consists of three parts: the engine dynamo test bench, the driving simulation test bench and the computer data acquisition and control system.
该方法也可应用于其他智能仪表及工业控制计算机等系统的设计中。
The method can be used in the system of intelligent-instrument and industrial control computer.
介绍了油脂工厂生产车间实现计算机控制的原理、系统构成及特性。
The control principle, composition and characteristic of computer control system in oils plant were introduced.
煤气冷凝鼓风机组技术改造选用D750 -28型鼓风机，采用增速型液力偶合器调节负荷及计算机控制系统。
In a coal gas blower set for condensation were incorporated D750 28 blower and speed up hydraulic coupler to adjust load as well as computer control system.
本系统由控制单元、传感器、数学模型、控制算法、计算机及工艺过程组成。
This system consists of control cell, sensor, mathematical model, control algorithm, and computer and technological process.
本系统由控制单元、传感器、数学模型、控制算法、计算机及工艺过程组成。
This system consists of control cell, sensor, mathematical model, control algorithm, and computer and technological process.
应用推荐