数据转换接口程序的设计和开发。
开发了数据转换接口，获得了四层次的产品模型。
A data transformation interface was developed to get the four-level product model.
管理数据库与实时数据库之间数据交换接口的研究。
Research on data exchange interface of management database with the real time database.
设计了一种新型的电容-频率-周期转换接口电路。
A new interace circuit for converting capacitance to frequency to period was designed.
主缸的速度换接与安全行程限制通过行程开关来控制；
Master cylinder for the speed of access restrictions and security through the trip exchanging to control switches.
这种直接转换接收器能够免除进行中频(IF)滤波的需要。
This direct conversion receiver can eliminate the need for intermediate frequency (IF) signal processing, as well as the corresponding requirements for image filtering and IF filtering.
在串并转换接收器中，并行数据在字节时钟的作用下并行输出。
In the deserializer, parallel data are clocked out by byte clock.
各炉体均设计有水电快换接头，使炉体更换简便、快捷、方便。
All furnace bodies have been designed with quick-detached water-electric connectors, so that it is simpler, quicker and more convenient in replacing furnace bodies.
电机转向是否正确：如电机转向相反请重新把电源线两相互换接上。
The motor's rotary direction whether is correct: if the motor's rotary direction is reverse or opposite then change the electrical wires and connect again.
该信号转换接口，具有电路设计简单、价格低廉、实时性好的特点。
The signal conversion interface is simple in design, low-cost and offering good real time performance.
展商欲要求更换接待员或翻译员，只能在其开始服务的第一天内更换。
Substitution of receptionist or interpreters, upon request, can be arranged only on the first day of service.
它是个上端为钻杆母扣或者由壬，下端为套管公扣，内空心的转换接头。
Its upper end is drill pipe box or union, the nether end is casing pin. It is a crossover with hollow inside.
串联电阻法与双线圈换接法是两种提高直流电磁开关返回系数的常用方法。
In this paper two methods to elevate the return factor of the d.
工具自动换接技术是提高水下机器人的作业能力和作业水平的关键技术之一。
The technique of auto - exchange tool is the one of the key techniques to advance the work ability and level of the underwater manipulator.
在超高速并串转换接口电路设计应用中，提出了一种新的双路恒流结构方式。
In the design and application of ultra-high-speed parallel-to-serial converter, a new method is proposed, which is called duplex constant-current-source structure(DCS).
本装置由高压防喷管、高压防喷盒、高压注脂泵、高压密闭闸门及转换接头等组成。
This setting was constituted by high-pressure lubricator, blowout preventer, injection oily pump, closed gate valve and conversion tie-in.
在太阳能电池、光化学转换和选择性的光热转换接收器之间存在着物理学的共同联系。
There is common physical relation among solar cells, photochemical convertion and selective radiation heat convertion detectors.
主要原材料采用主动开卷恒张力系统，热压系统采用气动装置。可以配自动换接料功能。
Main raw materials are used with unwound, tension control system and can be filled or changed automatically.
本实用新型灯具转换支架通过设置一连接板连接固定二转换接头，方便用户安装使用。
The utility model of the lamp switching support is convenient for users to install and use by arranging a connection board to fix the two switching nodes.
它主要由四个模块组成——通用算法模块，热力学模型模块，转换接口模块和算法推荐模块。
It consists of four main modules right now...... general method module, thermodynamic model module, conversion interface module and recommendation module.
根据链路权重为节点固定接口分配信道，减小可切换接口在信道改变过程中引起的网络干扰。
The channel of fixed interface on node is assigned according to link weight, in order to decrease network interference in the process of channel switching.
本文对数据交换接口的关键技术进行分析和研究，给出一种面向多核系统的接口单元设计方案。
Key technologies of data exchange interface are analyzed and researched in this paper, and a design plan of the interface unit faced to multi-core SoC is given.
在Solaris下，swap工具提供了大多数交换接口功能，包括报告使用情况和可用设备。
Under Solaris, the swap tool provides most of the swap interface functionality, including reporting usage and available devices.
多重感受装置已经研制出来并在经过神经移植的截肢患者身上测试，转换接触、压力、震动、剪切力和温度的感觉。
Multisensory devices have already been developed and tested on reinnervated amputees, relaying sensations of contact, pressure, vibration, shear force and temperature.
由于数字信号处理器具有10位的模拟——数字转换功能的接口，本文使用它的模数转换接口作为模拟量的采样。
Because DSP has analog-digital conversion interface of 10 bit, this type of interface act as sampling of analog quantity.
通过自行编制的模型转换接口程序，成功地实现了有限元模型从CAD系统到CAE系统的方便快捷的“零失真”转换。
According to the interface procedure of the model transformation compiled in this paper, the finite element model was successfully transformed from CAD system to CAE system in "nought distortion".
RS232和PROFIBUS - DP协议转换接口可嵌入现场设备作为智能从站，实现数据采集和控制等多种功能。
RS232 and PROFIBUS-DP protocol convert interface can embed in the process control equipment as Intelligent Slave Station, that realize many functions as data collect and control.
该系统中的硬件包括D／A和A／D转换接口、程控增益放大器、多路取样阀门控制接口等；软件包括在线流程分析和常规分析软件。
Hardware interface includes A/D, D/A converters, programmable gain controller and multiplex sampling valve controller. software includes on-line process analysis and normal analysis unit.
结果：为磁共振图像进行增强局部对比度算法研究提供了一个研发平台，实现了位图图像与医学数字成像和通信图像的数据转换接口功能。
RESULTS: the system provided a research platform for the algorithm of MRI local enhancement, and had the interface function of image format conversion between bitmap and DICOM.
该系统借助于软件智能体作为软件构件，利用数据可视化技术设计企业运作的规划与管理辅助工具，而信息交换接口则用面向对象方式来实现。
AIS uses software agent to build system, data visualizing to complete the plan and management tool of corporation operation, object-oriented method to design information interchange interface.
应用推荐