介质损耗测量是电力系统中的常规试验项目。
Dielectric loss measuring is the normal test items in electric power system.
介质损耗测量是电力系统中检测高压电气设备的常规项目。
Dielectric loss measuring is the normal item to test the high voltage equipment in electric power system.
膜表面粗糙度很小。光波导模式和光损耗测量表明膜具有较低的损耗。
The measurements of optical-waveguide mode and propagation loss indicate that the film is of good optical waveguide properties with low loss.
介质损耗测量作为高压电器设备预防性试验的重要手段,目前应用得很普遍。
The medium wastage measure is an important method to high voltage equipment defendable experimentation, now it is widely used in many fields.
文中介绍了DZCPV法的原理及使用该方法的介质损耗测量装置的具体设计。
In this paper the principle of DZCPV method is presented and the concrete design of a dielectric loss measuring device using DZCPV method is described.
介质损耗测量过程中杂散电容及高压引线寄生电容对测量结果的准确性有着很大的影响。
In the course of medium wastage measure, the sundry capacitance and high voltage down-lead parasitical capacitance greatly affect the veracity of the result.
本文提出了大型整体天线罩小损耗测量的一种新方法,详细讨论了其测量原理和方法程序。
A new method of a large antenna radome low-loss measurement is put forward in this article. The measurement principle and measurement procedure are discussed in detail.
针对介质损耗测量在准确度和抗干扰等方面的不足,提出了一种基于注入信号法的介损测量新方法。
Traditional methods for the measurement of dielectric loss are difficult to meet the requirement of accuracy and anti-interference.
本文介绍泰克公司TDS7000数字荧光示波器应用在开关电源功率损耗测量中进行的测量和分析任务。
This paper is to introduce the application of Tektronix TDS7000 Digital Fluorescent Oscillometer in measuring and analyzing the power loss of switching supply.
利用DTX提供了光纤链路的性能和安装质量,纤维长度,快速验证在多个波长的光损耗测量和极性确认。
The DTX provides quick validation of fiber link performance and installation quality, fiber length, measurement of optical loss at multiple wavelengths, and polarity confirmation.
T104测试线。用于双向传输损耗测量,由远至近噪声测量以及通常用于测试长途中继线的由远至近的噪声。
The T104 test, used for two-way transmission loss measurements, far-to-near noise measurements and near-to-far noise checks is normally used in testing toll trunks.
建议在现场进行这类试品的介质损耗测量时,必须注意将电桥或介损仪的接地点与被试品接地法兰或底座相连接。
It is suggested that when making field measurement of the dielectric loss of such objects, the instrument be connected to the flange or the base of the object to be earthed.
本文首先介绍了介质损耗测试的原理并对现有的介质损耗测量技术进行了分析对比,以谐波分析法作为基于SOPC技术的设计方案的理论基础。
The design of dielectric loss test system based on SOPC is carried out in the paper, according to the analysis of existing systems and the development and application of SOPC.
讨论了一种利用噪声测量的方法来确定毫米波段混频器的变频损耗和噪声温度的一个实例。
An example for measuring the conversion loss and noise temperature of mixers in millimeter wave band by using the noise measurement method is discussed in this paper.
混频器的变频损耗和噪声温度的测量可以用改变中频部分的噪声温度使接收机的系统噪声温度变化来加以确定。
The conversion loss and noise temperature of mixers is determined by changing the IF noise temperature so as to change the noise temperature of the receiver system.
并结合实际测量数据,详细分析了单相空载损耗比对发现变压器线圈和铁心局部缺陷的准确性和有效性。
Each and every idle loss ratio has been checked against actual measurement for accuracy and effectiveness in identifying local defects in windings and cores of transformers.
因此对电气设备绝缘介质损耗的测量已逐渐成为国内外电气研究中的一个较热门的领域。
So it has become a hot domain in the electrical research to measure the dielectric loss .
本文描述了测量超导体的交流损耗的新方法——双积分方法的原理、装置和三个样品的测量结果。
This paper describes the new method for a. c loss measurement in superconductor-The principle and device of double integration method and the result of measuring three samples.
本文采用三种方案实现了无源谐振腔损耗的测量。
Three methods for loss measurement of a passive resonant cavity are involved in this paper.
本文提出了用截止波导介质谐振腔测量微波材料相对介电常数和微波损耗的方法。
A method for measuring the dielectric constant and microwave loss of microwave ceramic with cutoff waveguide dielectric resonator is presented.
依据被测介质性质,在现有实验设备条件下,提出了一种标量法测量低损耗薄膜介质介电常数的新方法。
A new scalar method of measurement for low loss film medium is presented based on electric properties of measured medium under the present condition of laboratory.
论文采用了基于大量测量值的经验损耗模型作为信号强度和几何路径之间的映射关系。
This thesis adopts empirical path loss model based on numerous measurements to obtain the mapping between signal strength and geometric path.
测量介质损耗是高压电气测量绝缘的基础试验。
Measuring the medium loss is the insulating foundation experiment of electric measurement of high pressure.
介绍了测量片状小损耗介质介电常数、半导体电导率及非平衡载流子寿命等参数的结果。
The measurement results of complex dielectric constants of low loss and thin flake materials, conductivity and nonequilibrium charge carrier lifetime of semiconductor are introduced.
本文描述了一套用以测量单晶光纤损耗谱的装置。
A set for measuring single crystal fiber (SCF) loss spectra is described.
本发明涉及,在产生任何显着腐蚀损耗之前,非常精确地测量管壁厚度变化以确定腐蚀速率。
Thee invention relates to very precisely measuring changes in thickness of pipe walls to determine corrosion rate prior to any significant corrosion loss.
最后给出了损耗钮扣的实验测量结果。
Finally, the experimental results for measuring the loss button are given.
仿真和试验结果表明该算法在增加较少运算量的同时提高了介质损耗角的测量精度。
The results of simulation and tests indicate that using the proposed algorithm the dielectric loss Angle can be measured more accurately while less calculation amount is increased.
描述了一种用两个激活谐振腔的损耗比较测量超高反射率的有效方法。
An effective methods for measuring ultra high reflectivity by comparing the loss between two active optical resonators is presented.
描述了一种用两个激活谐振腔的损耗比较测量超高反射率的有效方法。
An effective methods for measuring ultra high reflectivity by comparing the loss between two active optical resonators is presented.
应用推荐