方法采用最小二乘法拟合直线识别T波终点。
Methods Using least square method simulating line identify the end point of t wave.
针对传感器的线性度与拟合直线的关系问题，建立数学模型。
In the light of the question of the relation between the sensor's linearity and fitting straight line, this paper builds mathematical model.
用这种方法可以求得最佳拟合直线方程和最小的非线性误差。
Using this method optimum imitative straight line equation and minimum non-linear error can be got.
圆圈，纷歧定需求以接触拟合直线也必然是此中心的楔角等分线。
The circle does not necessarily need to touch the fitting lines nor is its centre necessarily on the wedge Angle bisector.
MATLAB计算程序拟合直线的线性度很好，表明电路板材料断口的分形行为显著。
The linear degree of fit beeline of MATLAB program is high, which shows fractal behavior of PCB's fracture is obvious.
介绍一种采用最优化方法—黄金分割法（0．618法）求解传感器最佳拟合直线的新方法。
This paper gives a new method evaluting the optimum fitting straight of sensors-the golden cut method(0.618 method).
通过理论推导，获知了湿敏电阻器的感湿特性曲线与拟合直线之间的偏差随其本体电阻的变化关系。
By theoretical derivation, the partial derivatives of the deviation between the humidity sensing characteristic curve and the fitting line to the self-resistance are obtained.
这种方法适用于各种类型的线性传感器，可以求出传感器的最小非线性误差及相应的最佳拟合直线。
This method is suitable for all kind of linear sensor and the least nonlinearity error can be obtanined by it.
采用最佳拟合直线方法，计算产品模型投影轮廓多边形的长轴方位，并据此计算旋转变换所需转动角度。
Strategies of cubic projection and rotation transformation were put forward in this paper in order to transform the complicated 3D issues into 2D planar issues.
介绍一种传感器特性曲线自动拟合法 ，这种方法是以每一点校准数据到拟合直线的竖直距离的绝对值最小为原则。
It is based on the principle that the erect distances absolute value between the adjust data and the fitting beeline is minimal.
在研究几何畸变模型的基础上，给出了一种基于网格点拟合直线误差的几何畸变校正方法，达到了很好的校正效果。
Based on the study of the model of geometric distortion, a correction method due to the linearity of crossing points in the image of grids were also advanced, which gained an ideal correction result.
本信中对“一种基于K-L展开式计算传感器最佳拟合直线的新方法”一文中某些计算上和概念上的问题进行了讨论。
In this letter some problems in calculation and conception of the paper" A New Method for Calculating the Best Fitting Line of the Transduce Based on K-L Expansion Equation- are discussed."
用最小二乘法求出了刀具拟合直线，并对拟合直线进行了修正，保证了修正后的创成表面与原拟合直线创成表面相吻合。
The cutter curve is fitted with the least square method and corrected to assure the corrected generation surface is identical with that of original fitted curve.
这楔角的等分线给作为路口停止切割边缘轮廓点品脱的啤酒。 （3）画一个圆订交点，两品脱和相切直线拟合直线。
The wedge angle bisector gives as intersection with the cutting edge profile point pint. (3) Draw a circle that intersects point pint and is tangent to both straight fitting lines.
该算法通过对TOA拟合直线截距的分析，能识别出断裂、谐波脉冲序列，从而进行相应地脉冲整合，得到正确的分选结果。
In the algorithm, two cases mentioned above are judged by analysing the intercept of TOA fitting straight line, and then corresponding pulse sequences are merged to obtain the correct sorting results.
针对苯丙氨酸解氨酶生物传感器非线性特性，依据最小二乘法理论，采用最优化技术，建立了最佳拟合直线的数学模型，并给出基于可编程控制器的数据拟合程序。
To solve the non-linear problem of a biosensor, the least square method and the optimum technique have been applied to build a mathematical model to evaluate the optimum fitting straight.
然后你可以试着做个直线拟合，这个看上去就不像是呈直线趋势的。
And if you try to do a best-line fit, well, it doesn't seem to follow a linear trend.
通过对某电涡流位移传感器位移、电压用多项式拟合曲线的特点进行分析，经过试探发现该传感器曲线可转化为直线。
The curve of an eddy current displace sensor can be converted into a line by analysing the character of the curve obtained by polynomial fitting.
回归软件程序将样本点用图表示，并且给出最拟合样本点的直线的价值函数公式。
Regression software programs graph the sample points and give the (cost-function) formula of the straight line that best fits the points.
本文重点论述等间距直线逼近及过两已知节点与两节点半径均值圆弧拟合技术的基本原理以及误差分析方法。
This paper focuses on the presentation of the basic principles and error analysis of equal intervals linear approaching and average radius arc matching technique.
直线拟合可以保持原色块轮廓中比较线性化的部分和色块图形中的尖锐角部分。
Beeline fitting can keep the part of linearization and the acute Angle of Outlines of previous color blocks.
本文用最小二乘法拟合的直线确定三相异步电动机风摩耗测量的标准不确定度。
This paper determines standard uncertainty for measurement of windage and friction loss of three-phase induction motor through fitting line of least square method.
本文提出了一种复合数字滤波方法及基于最小二乘原理的直线拟合方法，用于实现火炮接口参数检测系统的滤波和线性度拟合。
A compound digital filtering method and a line fitting method based on the least squares are presented, which are used in the measurement system of interface parameters of artillery.
在线阵CCD测量系统中采用直线拟合方法检测一维图像边缘。
A straight line fitting method is adopted in edge detection of one-dimension image in the linear CCD measuring system.
电火花线切割非直线和非圆弧的模具刃口前，需先用圆弧拟合模具刃口曲线，以便计算线切割编程数据。
Before EDM wire cutting die points of non_straight and non_arc lines, an arc for fitting the curve of the die point is necessary so as to calculate wire_cutting programming data.
根据台阶边缘检测结果，选取部分采样点数据，用最小二乘法进行直线拟合。
Based on the results of the edge anchor, several segments of the height data are selected and linear polynomial fitting are done using least square approximant on these segments separately.
将霍夫变换与最小二乘法相结合，研究对实验数据和图像处理中的二值边缘图进行直线拟合的方法。
A new approach to fit line is proposed. In this method, Hough transform and least square have been combined to process experiment data and the contour of binary images.
对工程图纸矢量化中线条的检测，采用最佳拟合的方法，得到了线条对应的标准直线方程。
In the detection of lines in engineering drawing vectorization, the method of best coinciding was adopted to attain the according standard line equation.
实验结果发现拟合的直线变化趋势能够较好地反映肌肉的疲劳过程。
Findings of the experiment show that the trend of the fitted straight line reflects quite well the muscle weariness process.
通过对离散点进行短线段拟合的基础上，再利用曲线拟合的最小二乘法对圆和直线进行二次拟合。
On the basis of short straight-line fitting, this dissertation USES the least-square method of curve matching to discern circle and straight line.
应用推荐