像所有的健身房一样，它们有各种各样的器材来帮助锻炼身体不同部位的肌肉，比如实用的自行车、胸部拉伸机和跑步机。
Like all gyms, they have all sorts of things to help build up muscles in different parts of the body, like applied bicycles, chest stretching machines, and running machines.
本公司主要生产拉伸机和销售。
全自动智能拉伸机可以为您把好安全这一关。
Intelligent automatic drawing machine for you to have a good security clearance.
我公司是生产液压双动薄板拉伸机的专业化企业。
Our company is the production of hydraulic stretch of double-action plate of specialized enterprises.
本文介绍了该拉伸机的结构、功能、技术参数、工作原理。
This article introduced the structure, function, technical parameter and operational principle of the stretcher.
腿部肌肉韧带拉伸机，是针对舞蹈者的大腿内侧肌肉进行韧带拉伸的专业舞蹈设备。
The leg muscle and ligament stretcher is for training the dancer's inside muscle and ligament of thigh stretch.
公司拥有该行业全套生产设备，全自动30t冲压机、剪切机、卷边机、切割机、烤漆房、300 T液压拉伸机等。
The company has a full set of production equipment in the industry, 30t automatic punching machine, cutting machine, crimping machines, cutting machines, paint room, 300t hydraulic tensile machine.
系统由超声波驱动器、换能器、变幅杆、拉丝模、拉伸机等组成，通过对黄铜丝的拉拔实验，考察了超声振动对拉拔力和丝的表面质量的影响。
Through a series of drawing experiments of brass wires, the effects of ultrasonic vibration on drawing force and surface quality of the wires were discussed.
每5分钟再次跳下跑步机做1分钟的拉伸。每侧坚持20秒拉伸。
Every five minutes jump off again for one minute to do an easy stretch; 20 seconds on each side.
结果表明获得较低缩率的最佳工艺条件是：拉断机热拉伸倍数为1。
Results demonstrate the following optimum conditions for low-shrinkage sliver: hot stretch ratio of breaking machine, 1.
用万能拉伸实验机和差示扫描量热仪(DSC)对物理老化和应变老化的ABS试样进行研究。
ABS samples of physical aging and strain aging were studied by universal tensile test machine and differential scanning calorimeter (DSC).
选用熔融纺丝法制备PDLLA／HA复合纤维，探索了熔融纺丝过程中温度、挤出机转速、拉伸速率、加料速度和冷却速率等一系列工艺参数的选择及其影响因素。
PDLLA/HA composite fibers were produced by melt spinning, and the choices of the process parameters such as temperature, revolving speed and drawing speed etc were discussed.
该类型矫直机的成功使用对拉伸矫直设备方案选型及设计具有指导意义及参考价值。
The successful application of the stretcher is instructive and referential to the type selection and design of stretcher.
为研究蒙皮零件在拉伸成形过程中的变形行为，自行研制开发了1MN数控蒙皮拉伸成形试验机系统。
To study the deformation behavior of skin parts during the process of stretch-forming, a 1mn numerical control skin stretch forming testing system was developed.
结果表明，设置试验机的控制参数、拉伸速度和试样尺寸等均对力学性能测试结果有影响。
The result showed that these parameters were affected by the controlling parameters and tensile velocity of the machine and dimensions of the samples.
AETNA集团是生产和销售拉伸薄膜缠绕包装机、包膜机和冷拉伸膜机的公司。
AETNA GROUP produces and sells on a worldwide basis stretch wrapping machines, horizontally banding and shrink film wrappers.
文章介绍了一种利用普通的智能电子拉力试验机配以计算机来计算塑料薄膜拉伸弹性模量的方法。
This article introduces a method to determine the plastic membrane tensile modulus by using a normal mart electron tensile testing machine and computers.
介绍了拉伸弯曲矫直机的特点及工作原理，对生产中常见问题如弯曲辊组切入量、带钢在张力辊上打滑及伸长率损失等进行了分析讨论。
The problems in production such as amount of draught of the bend rolls, glide of steel strip on the bridle rolls, lose of the elongation and so on are analyzed and optimized.
介绍了用于单动压力机的新型恒压边力落料拉伸复合模的结构及主要设计参数和模具工作过程。
The structure, main design parameters and work process of the compound die installed on single action press and working for blanking and drawing with constant blank holder pressure were presented.
采用偏光显微镜(PLM)、差示扫描量热仪(dsc)、毛细管流变仪和拉伸试验机对透明聚丙烯(PP)的结晶形态、热学、流变性、力学性能进行了研究。
In this paper, the crystalline morphology, thermology, rheology and mechanical properties of clarified PP are investigated by PLM, DSC, Rheometer and stretch tester.
拉伸弯曲矫直机由矫直机、张力辊及其传动装置、底座和快速换辊装置部分组成。
The leveller consists of straightener, tension rolls and driving device, basement and speedy roll change device.
介绍了自行研制开发的液压拉伸矫直机的原理、结构特点及技术参数。
The principle, structure characteristic and technical parameters of the self-developed hydraulic stretching straightener have been described in this article in detail.
使用我们的数控拉伸弹簧机，我们能生产拉伸弹簧，弹簧丝的直径在0.006“和0.210”之间。
Using our CNC spring coiling machines, we can produce custom extension springs with wire diameters from 0.006" to 0.210".
通过SEM、EPMA、EDS、显微硬度计和拉伸实验机对搭接接头的微观组织及力学性能进行了研究。
Microstructure characteristics and mechanical properties of lap joints were researched by SEM, EPMA, EDS, micro-hardness tester and tensile experiment machine.
高频疲劳试验机属于金属材料试验机，是一种主要用于测定金属及其合金材料在室温状态下的拉伸、压缩或拉压交变负荷的疲劳性能试验的机器。
High-frequency fatigue tester, which belongs to metal material tester, is used to measure the fatigue performance of drawing, compressing of metal material and its alloy in room temperature condition.
介绍了拖拉机覆盖件拉伸模设计的一般过程，以及如何利用UG软件所提供的各种功能设计出拉伸模。
With the general process of designing the drawing die for the tractor body metal sheets, how to use the various functions of UG software to design the drawing die was introduced.
在拉伸挤出机过程中的应用研究验证了这种方法的优良性能。
The good quality of this method has been verified in the application research on a polymer extruder process.
本公司成立于2000年，专业生产自动包装机械、拉伸膜缠绕机。
The company was established in 2000, specializing in the production of automated packaging machinery, tensile membrane winding machine.
真空热循环试验前后CF/EP层合材料的拉伸性能由电子万能材料试验机完成，本文利用扫描电镜观测试样表面形貌和拉伸后的断口形貌。
The tensile strength and Young's modulus of CF/EP specimens before and after vacuum thermo-cycling were measured by an electrical universal material testing machine.
真空热循环试验前后CF/EP层合材料的拉伸性能由电子万能材料试验机完成，本文利用扫描电镜观测试样表面形貌和拉伸后的断口形貌。
The tensile strength and Young's modulus of CF/EP specimens before and after vacuum thermo-cycling were measured by an electrical universal material testing machine.
应用推荐