我们用抛丸（喷沙）的方法。
抛丸后还要将钢板涂漆吗？
抛丸颗粒的大小，比率及来源是否受控？
抛丸机能同时对铸件进行落砂﹑除芯和清理。
At the same time function on casting blasting shakeout, coring and cleaning.
抛丸率是抛丸器的一项重要的技术经济指标。
Shot blasting rate is an important techno-economical index to blast wheel.
主要产品有各类研磨机、抛丸清理机、抛光机等。
Our main products are various grinding machines, shot blasting machines and polishing machines.
钢架不得生锈，这可以通过轻微抛丸处理来达到。
Steel must be rust free and the work will benefit from a light sand-blast .
着重介绍了抛丸室的设计、抛丸器的选型和布置。
The design of the ball blast house and the choice of impeller head is the key introduced.
抛丸器安置不合理，产生大量抛丸死角，增大工作量！
Impeller Placement Is Unreasonable, Produce Plenty Of Corner Of Impeller, Extend Workload!
使用表明，该抛丸机能满足摇枕、侧架表面清理的要求。
It has proved in the operation that the shot blast machine can satisfy the requirements of surface cleaning for bolsters and side frames.
而抛丸清砂则相反，费用高，检验平板表面清理的非常干净。
And is shot rust-removing, by contrast, cost is high, inspection of the surface cleaning plate are very clean.
介绍了HQ 378吊钩式抛丸清理机的结构特点及发展前景。
Structural characteristics of Model HQ378 shot blasting machine have been introduced with developing prospect.
公司主要产品有“H”型钢通过式抛丸机、钢板预处理生产线；
Our main products are "H" beam through type shot blasting machine, steel plate pretreatment production line;
设备防尘除尘效果差，粉尘排放不达标，且直接影响抛丸效果！
Dust Removal Effect Of Machine is Bad, Dust Emission Standard, Influence Effect Of Blasting Directly!
本文介绍机械手数控缸体、缸盖抛丸清理机床的主要结构与性能。
This article introduces the major structure and properties of a robot numerical controlled cylinder body and cover shot blasting machine.
板簧专用应力抛丸机的使用，最大限度的提高了板簧的疲劳寿命；
And the stressing polishing machine for springs improves their anti-fagging ability and life-span.
本文分析了机械进丸抛丸器中弹丸进入分丸轮窗口以后的运动过程。
In this paper, the movement course of blasting impeller shots after entering the Windows has been analyzed.
阐述了该生产线的规划、系统组成、系统调试以及立式抛丸的优点。
According to the fact in factory, it introduced the layout, the structure, and the system debugging of the production line. The merit of the vertical ball blast is also analyzed here.
表面可以改变您的创作之前，通过研磨，喷砂，抛光，抛丸或具有覆盖。
The surface can be changed before your creation by grinding, sandblasting, polishing, shot blasting or with an overlay.
理论计算值与实际应用值相符，为抛丸器的参数设计提供了理论依据。
Theoretical numeral value tallies with fact, which presents the theoretical basis for determining parameters of impeller head.
对铸钢15 - 5ph法兰盘表面抛丸后皱皮的产生原因进行了分析。
Cause of the surface wrinkling of flange made of 15-5ph cast steel was studied.
表面经抛丸、喷塑处理，美观耐用，整体高度低，便于铲车加载、卸载货物。
The shot blasting and paint coating make the iron surface elegant and anticorrosive. Low height design makes load and unload by forklift convenient.
以喷丸喷砂、 抛丸清理、环保除尘三大系列100多个品种为主导产品。
To peen sandblasting, Shot Blast Cleaning, green dust three series over 100 varieties - oriented products.
分析了机械进丸抛丸器在正常工作中定向套与分丸轮间隙中弹丸的运动过程。
In this article, the motion of shots entered the clearance between impeller and control cage has been analyzed while blast wheel is working normally.
介绍了某柴油机厂所用8591D型贯通抛丸机的使用概况及大修改造方案。
This paper has described the general information by using 8591d through shot blasting machines in some diesel engine manufacturers as well as the overhauling and upgrading plans.
这为进一步提高分丸轮、定向套等抛丸器易损件的寿命提供了重要的理论依据。
These provided an important theoretical base for lengthening the life of the impeller and the control cage.
壳体采用高强度合金铝一次性压铸成型，表面经高速抛丸清理后高压静电喷塑。
Shell made of high strength aluminum alloy casting off the surface after blast cleaning by high voltage electrostatic spray.
这为进一步提高分丸轮、定向套等抛丸器易损件的寿命提供了重要的理论依据。
These provided an important theoretical base for lengthening the life of the impeller and th...
这是一种全新的观点，它为进一步提高抛丸叶片的使用寿命提供了重要的理论依据。
This is a new point which provided a new way to prolong the life of the vane.
这是一种全新的观点，它为进一步提高抛丸叶片的使用寿命提供了重要的理论依据。
This is a new point which provided a new way to prolong the life of the vane.
应用推荐