折板理论是折板结构静力分析的精确方法。
Folded-plate theory is an analytical method for box girder static analysis.
这为折板絮凝池的研究提供了一种新的方法，对实际工程有着重要的指导意义。
It also provides a new researching method for folded plate flocculator and has an significant guidance for the actual engineering.
答复：折板反应器需要提供底部反应器支撑，支撑采用角钢，由化学锚栓固定。 %。
Reply: : The folded plate reactors need support at the bottom. The support will take angle iron fixed with chemical anchor bolt.
利用该折板结构的空间传力特性，设计了结构板、梁、柱的尺寸、布置、配筋和细部构造。
Taking advantage of folded-plate characteristic of transmitting forces spatially, the laying-out, section, reinforcing bars, and detail construction of slabs, beams, columns are designed.
本文介绍一种用现场预制的折叠式V形钢筋混凝土折板作为承重墙和屋盖的单层工业厂房结构体系。
This paper describes the design of a single span one-story factory building, in which the reinforced concrete precast in-situ V-shaped folded plates were used for roofs and walls.
伞状折网架是在钢筋混凝土伞状折板和网架等结构优点的基础上，构思出的一种新型大跨度空间结构形式。
Based on the structural features of RC umbrella folded plate, space trusses, etc., the umbrella folded space trusses has been developed as a new large span space structural system.
以某体育馆钢屋盖结构为实例，论述了折板网壳结构的选型、受力特点、水平推力的处理方法和模态分析。
The folded plate latticed shell is a new type of lattice space structure, having merits of both folded plates and spatial lattice structures.
第一种反应器近似于ABR式的反应器，第二种反应器是水平推流折板反应器，第三种是分区域式反应器。
The first reactor is approximately ABR-type reactor, the second is a horizontal plug flow reactor, the third is the sub-region reactor.
对整片折板钢板剪力墙在反复荷载下滞回性能进行研究，得到了折板钢板剪力墙极限承载力、延性和滞回性能。
Through the research of corrugated steel shear wall in repeated load, the ultimate load-carrying capacity and hysteresis property is found.
以SDS - 3电子束曝光机为基础，用折板结构静电偏转替代直板结构静电偏转，探讨了电子束曝光机折板静电偏转场的电子轨迹与电位分布应满足的要求。
Based on the SDS-3 E-beam lithography machine, the electrostatic deflection of the folded plate structure was used instead of the electrostatic deflection of the plate.
游离水分离器在一侧的顶部附近有一个入口和折流板，并在顶部有一个气出口。
The free water knockout has an inlet and deflector baffle near the top on one side and a gas outlet on the top.
实验制作了具有10个隔室的厌氧折流板反应器用于探讨其处理高浓度有机污水的性能和运行的稳定性。
An ABR with 10 compartments has been built to study the stability and performance of an anaerobic baffled reactor (ABR) in the treatment of a high-strength organic wastewater.
折流板除了使流体横向掠过管束流动外，还有支撑管束、防止管束弯曲的作用。
Baffles function not only to make fluid flow over pipe bundles laterally but also to support pipes and prevent their bending.
本文对设计降低压力损失和防止振动的管壳式冷却器，提出了一种有效的方法，就是管束采用折流板-扁钢条复合支承。
In this article, one method of using the combined support composed of baffles and flat steel to design tabular heat exchangers with low pressure loss and vibration protection was presented.
介绍了螺旋折流板换热器折流板的结构形式和特点，给出了螺旋折流板各部分几何尺寸的计算公式。
Spiral baffle heat exchanger baffle type and feature are introduced, and the calculation formula of all geometry dimension of spiral baffle are given.
在环状流下，A流路的贯通作用使折流板前后对应区域的含气率基本一致；
In annular flow the penetrating effect of stream A makes the void fraction same besides a baffle.
环室中装有五个或更多个搅拌机和一个径向折流板。
Annulus is equipped with five or more agitators and a partial radial baffle.
但是其折流板和定距管下料尺寸的计算比较复杂。
But the calculation of the baiting size of the baffle plate and spacer pipe is complex.
以大豆蛋白生产废水为原料，对厌氧折流板反应器进行了连续流有机废水发酵产氢实验。
Hydrogen production from soybean wastewater by anaerobic activated sludge was investigated in an anaerobic baffled reactor (ABR) under continuous flow condition in this paper.
本实验采用厌氧折流板反应器(abr)对碱法草浆中段废水进行了水解酸化预处理的研究。
The experiment makes use of Anaerobic Baffled Reactor (ABR) in the study of hydrolysis-acidification pretreatment on alkali straw pulp bleaching effluent.
一般地它包括一个具有一系列折流板并在底部带有液体出口的容器和一条在容器顶部的放气管线。
The gas buster typically comprises a vessel containing a series of baffles with a liquid exit on the bottom and a gas-vent line at the top of the vessel.
内外部的加强筯，折流板，膜板，三角板等都应该倒角以方便锌水流动。
The internal and external stifferers, baffles, diaphrams, gussets etc. should have the corners cropped to aid the flow of molten zinc.
结果表明，螺旋折流板换热器和弓形折流板换热器壳程压力损失随流量的增大而增加，二者之间的差距呈上升趋势。
The results show the pressure drop raise in both helical and segmental baffles heat exchangers with the increase of mass flow rate.
试验结果表明，螺旋折流板阻力只有弓形的30%，此外，在同样的压降下，螺旋折流板传热效率也提高10%。
Test results show the resistance of spiral plate is 30% of that of segmental baffle, and the heat transfer efficiency is improved by 10% at the same pressure.
实验段采用壳管式换热器模型，沿长度方向用三块折流板将管束分成四个冲刷流程。
A tube shell heat exchanger model was used to serve as the test section, devided into four crossing paths by three baffles along its length.
简要介绍了螺旋折流板换热器的折流板及定距管尺寸的CAD计算方法。
The method of CAD calculation for the sizes of baffle and spacer in helical baffle heat exchanger was briefly introduced.
缺氧折流板反应器(abr)处理苯胺废水，提高了废水的可生化性。
Anoxic baffled reactor (ABR) is used to treat the wastewater consisting of aniline for improving the wastewater biodegradability.
缺氧折流板反应器(abr)处理苯胺废水，提高了废水的可生化性。
Anoxic baffled reactor (ABR) is used to treat the wastewater consisting of aniline for improving the wastewater biodegradability.
应用推荐