简述了主要成膜物的性质及成膜机理。
The nature of the main film forming material and film forming principle have been resumed.
本文介绍了一种以聚醋酸乙烯为成膜物的彩色微珠喷涂涂料。
In this article, a kind of colour micro-pearl paint with polyvlnylacetate as membrane former has been presented.
成膜物的成膜方式多样化为研究涂料成膜机理和预测性能开创了新思路。
The diversity of film forming approaches has provide a new concept for studying the film-forming mechanism and performance prediction.
以此共聚物为成膜物，再采用合适的固化剂，添加适当的颜填料配成涂料。
By adding some suitable pigment and fillings into this polymerization, a new type high-temperature coating was synthesized.
研究了玻璃微珠乳胶涂料成膜物的合成，叙述了各种因素对聚合物涂膜性能的影响。
Study was made of synthesis of film forming material for glass microballoon emulsion coating and influence of various factors on polymer film performance is described.
用可紫外光固化的星形支化丙烯酸酯树脂作主要成膜物，制成了UG1紫外光固化粉末涂料。
An ultraviolet curing powder coating UG 1 was prepared with an ultraviolet curing star grafted acrylate resin as a main film forming material.
同时指出，活性成膜物和对粘态膜起“钉扎”作用的高熔点物是高温热处理保护涂料的必备成分。
Furthermore, it can be concluded that an active viscid membrane and a high melting point constituent which can fix viscid membrane are the esse.
同时用红外光谱和扫描电镜讨论了丙烯酸酯改性聚氨酯成膜物的结构特征，用热分析仪分析了膜的热稳定性能。
The film structure of the aqueous acrylate modified polyurethane is characterized by use of infrared spectrum and SEM; the thermal stability of the film is investigated by use of thermal analyzer.
以丙烯酸、 丙烯酸丁酯和甲基丙烯酸甲酯为单体，采用自由基聚合法制备了聚丙烯酸卷材涂料前驱成膜物，获得了适宜的制备工艺条件。
Phragmoplast of coil coating has been prepared by free radical polymerization and by using acrylic acid, methyl methacrylate, butyl acrylate as the raw materials.
树脂乳胶膜的性能不仅与涂料的配方和其中聚合物的分子链结构有关，而且与聚合物的成膜过程密切相关。
The performance of the resin latex film was not only dependent on its formulation and the molecular chain structure of the polymer inside, but also the film formation process of the polymer.
综述了有机硅烷偶联剂的种类、成膜机理、聚合物-金属界面模型、薄膜制备、薄膜及涂层制品的性能。
The types of silane coupling agents, the mechanism of film formation, model of polymer-metal interface, the preparation of silane films and the properties of films and coatings were summarized.
涂料的性能不仅取决于涂料的配方和其中聚合物的分子结构，而且与聚合物的成膜过程密切相关。
The performance of coatings not only relies on formulation and molecular structure of polymer binders, but also the film - forming process.
紫精的烷基影响紫精化合物的还原电位及其还原产物在电极上的成膜性能。
The alkyl groups of viologen compounds influence the reduction potentials and the film forming property of reduced products on the electrode.
聚合物成膜后的研究结果表明，该膜具有良好的机械性能和电化学性能，可能在质子交换膜燃料电池中得到应用。
They can be easily cast into tough membranes and show good mechanical and electrochemical properties. The polymers show good prospective usages in the proton exchange membranes fuel cell.
介绍了聚合物水泥防水涂料的成膜机理和防水机理，并对其具有不同延伸性能的两大类产品作了简要说明。
The film-forming and waterproofing mechanism of Polymer cement waterproof coating is described. Two sorts of products of its kind with different elongation property are also described.
研究发现，吸附在膜上的NO3-中的N5+被还原成胺类低价态的N，焙烧后该类氮化物中的N消失。
N5+ in NO3- on the surface of the film is deoxidized into N in amine, and N in amine disappear after calcination.
同时还探讨了聚合物水泥防水涂料的成膜机理。
The film forming mechanism of polymer-cement waterproof coating was discussed as well.
本文综述了近年来国内外有机溶剂混合物渗透汽化分离膜材料及成膜技术的最新研究进展。
This paper reviews the recent progress of membrane materials and membrane-forming technologies in the pervaporation separation of organic solvent mixtures in the world.
在加入少量藻酸钙盐的条件下，用硼酸交联聚乙烯醇（PVA），活性污泥培养物渗于其内，将其涂于载体上被固定成膜。
To add a little calcium alginate into boric acid cross-linkedpolyving akohol(PVA)and permeate active sludge culture into the mix, and at last apply the mix on carrier to make film.
讨论了醌类化合物的成膜性能与生物活性之间的关系。
The relationship of biological activity and LB film character of quinine derivatives was also discussed.
对改性后的聚合物进行旋转涂膜，发现其成膜性能极大的改善。
The result showed the film forming properties of the polymers was improved after modified.
含氟丙烯酸酯类聚合物因具有突出的成膜性能及耐老化性能而成为优良的成膜材料。
Fluorinated acrylate polymers were well known film -forming materials for their excellent film - forming properties and aging resistance.
聚合物粒子凝聚成膜涂料配方设计的主要内容包括涂料配方设计原则、涂料组成的确定和涂料示例等。
The design of formulation for polymer particle coalescing film-forming coatings included the principle of design, composition and examples.
该施胶剂组合物可包括一种或多种偶联剂和一种或多种成膜剂。
The size composition may include one or more coupling agents and one or more film forming agents.
本文利用聚合物表面改性和表面粗糙方法，大幅改善了PP表面的润湿性，成膜率从约40%提高到约95%。
Based on polymer surface modification and roughening method, the surface wettability of PP improved significantly. Film-forming ratio increased from about 40% to 95%.
褐藻胶是一种亲水性天然高分子化合物，具有良好的增稠性、凝胶性和成膜性。
Alginate is a hydrophilic natural high molecular compound has good thickening, gelling and film forming properties.
方法雷公藤根或茎的水或乙醇提取物入药制备成涂膜剂，采用大鼠完全佐剂性关节炎模型，观察不同药物组对原发性肿胀和继发性肿胀的影响。
Methods The crude drugs of root or stem of Tripterygium wilfordii Hook. were extracted by water or ethanol. The film-forming preparations were made of different extractives.
本发明涉及一种有机硅聚合物及其在金属表面成膜的方法。
The invention relates to an organosilicon polymer and a film forming method thereof on a metal surface.
本发明涉及一种有机硅聚合物及其在金属表面成膜的方法。
The invention relates to an organosilicon polymer and a film forming method thereof on a metal surface.
应用推荐