为了提高其成膜性能,必须加入成膜助剂。
In order to improve its property of film forming, assistant of film forming should be added to.
讨论了醌类化合物的成膜性能与生物活性之间的关系。
The relationship of biological activity and LB film character of quinine derivatives was also discussed.
讨论了微粒凝胶对涂料施工、成膜性能的影响以及应用。
The influences of microgel on the application, film-forming property and dry film properties are discussed.
成膜助剂有利于改善涂膜的成膜性能,提高涂膜的柔韧性;
The coalescer can improve the ability of film formation of the paint and enhance the flexibility of film.
同时,对改性酪素的成膜性能、涂饰应用性能进行了研究。
The characterizations of film and application in finishing were studied.
同时,对改性酪素的成膜性能、涂饰应用性能进行了研究。
Preparation of the casein-montmorillonite intercalation nanocomposite and its water resistant performance research;
研究了树脂水溶性、水分散体系稳定性、成膜性能的影响因素。
The influencing factors on water solubility, water dispersion stability and film-forming property were studied.
对改性后的聚合物进行旋转涂膜,发现其成膜性能极大的改善。
The result showed the film forming properties of the polymers was improved after modified.
研究了树脂水溶性、水分散体系稳定性、成膜性能的影响因素。
The macromolecules of better water-solubility and film forming properties in food raw matenal;
紫精的烷基影响紫精化合物的还原电位及其还原产物在电极上的成膜性能。
The alkyl groups of viologen compounds influence the reduction potentials and the film forming property of reduced products on the electrode.
含氟丙烯酸酯类聚合物因具有突出的成膜性能及耐老化性能而成为优良的成膜材料。
Fluorinated acrylate polymers were well known film -forming materials for their excellent film - forming properties and aging resistance.
成膜助剂在乳胶漆中起着重要作用,它能降低乳胶漆的成膜温度,改善乳胶漆的成膜性能。
Assistant of film forming plays an important role in emulsion paint, it can low temperature of film forming of emulsion paint, improve characteristic of film forming of emulsion paint.
经氧等离子体处理后,ITO薄膜的表面粗糙度减小,平整度提高,提高了ITO薄膜表面的润湿性能,改善了有机物在其表面的成膜性能。
It is found that ITO surface roughness decreased after oxygen plasma treatment, which can improve its wetting performance and consequently improve the film performance.
介绍了成膜机理、涂膜性能、施工工艺及应用实例。
Film-forming mechanism, film performance, construction process and application are described.
树脂乳胶膜的性能不仅与涂料的配方和其中聚合物的分子链结构有关,而且与聚合物的成膜过程密切相关。
The performance of the resin latex film was not only dependent on its formulation and the molecular chain structure of the polymer inside, but also the film formation process of the polymer.
同时考察了树脂的结构对于成膜表观及力学性能的影响。
The influence of resin structure to the appearance and mechanical properties of coating were examined as well.
通过对比的方法测定了丙烯酸树脂成膜的物理机械性能及应用于皮革涂饰后涂层的性能。
The physical and mechanical properties of the acrylic resin films as well as the performances of the coating film on the leather were determined.
综述了有机硅烷偶联剂的种类、成膜机理、聚合物-金属界面模型、薄膜制备、薄膜及涂层制品的性能。
The types of silane coupling agents, the mechanism of film formation, model of polymer-metal interface, the preparation of silane films and the properties of films and coatings were summarized.
本文设计采用水性聚氨酯为基本成膜剂,并对其进行改性,满足产品的性能要求。
Polyurethane is designed as basic resin and improved from its basic properties to satisfy command from new leather products.
本文论述了HD型水下及潮湿面用防腐涂料的成膜机理、组成、性能及施工工艺。
The film - forming mechanism, composition, properties and processing of HD anticorrosive coating used for under water and moist surface painting are described in this paper.
本文介绍了蒸汽膜绝热的原理,一些试验结果,根据上述试验结果设计成的样机性能以及它的优点。
This article is given to introduce the adiabatic principle of vapour film, some of the experimental results, the performance of the proto.
以高氯化聚乙烯(HCPE)为主要成膜物质配制了一种新型道路标志漆。介绍其配方、制作工艺及主要性能指标。
A new road marking paint was prepared with HCPE as its main film forming substance. its formula, manufacturing process and main performance indexes were introduced.
本文研究了两种硅氧烷的成膜固化体系,在此基础上,配以钛白粉、溶剂及其它助剂,进行了硅橡胶油墨的性能试验。
This paper investigated the film solidify system of two kinds of silicone, then dealt with the property test of silicone rubber ink by mixing with titanium pigment solvent and other auxiliary.
涂料的性能不仅取决于涂料的配方和其中聚合物的分子结构,而且与聚合物的成膜过程密切相关。
The performance of coatings not only relies on formulation and molecular structure of polymer binders, but also the film - forming process.
分析讨论了生产过程中的原料选择、成膜特点及施工要点,测试了所得产物性能。
Raw materials selection, in manufacturing process, film forming characteristics and key operations were analysed and discussed, properties of the products obtained were tested.
研究了成膜介质和还原剂对大豆分离蛋白膜(SPI)性能的影响。
Effect of filming medium and reducing agents on the properties of soy protein isolate film (SPI) was studied.
聚合物成膜后的研究结果表明,该膜具有良好的机械性能和电化学性能,可能在质子交换膜燃料电池中得到应用。
They can be easily cast into tough membranes and show good mechanical and electrochemical properties. The polymers show good prospective usages in the proton exchange membranes fuel cell.
造出的最佳配方具有良好的成膜性和加工性能,膜的综合力学性能良好。
The chosen optimum formulation had good film reforming properties, processing properties, complex mechanical properties of film.
对电解液中的各组分在成膜过程中的作用及电解工艺参数对成膜过程和膜层性能的影响进行了研究探讨。
The influences of electrolyte components and preparation parameters on the film-forming process as well as properties of oxidation film were discussed.
对电解液中的各组分在成膜过程中的作用及电解工艺参数对成膜过程和膜层性能的影响进行了研究探讨。
The influences of electrolyte components and preparation parameters on the film-forming process as well as properties of oxidation film were discussed.
应用推荐