探讨了原料及喷涂成型条件等对涂层物性的影响。
The effects of raw material, processing condition of spray-up on the physical properties of sprayed elastomer are discussed.
介绍无氨耐燃烧酚醛注塑料的制备、成型条件和性能。
The preparation, production process, properties of non-amino phenolic moulding compound with high flame-retardance are presented.
上述结论为压缩成型条件和工艺参数的选取提供了实验依据。
These conclusions provide evidence for the selection of pressing conditions and parameters.
介绍了无阻燃剂阻燃酚醛塑料的制备工艺、性能、成型条件等。
The preparation technology, property and molding conditions of the flame-retardant phenolics without flame retardant is introduced.
探讨了煤的变质程度、粘结剂和成型条件对颗粒间作用力的影响。
The metamorphic degree of coal, the binder and the briquetting conditions that affect the acting forces were also studied.
介绍了制备沸石分子筛催化剂成型时，成型条件对催化剂强度的影响。
The factors which influence the mechanical strength of the zeolite catalyst during extruding were discussed.
实验结果表明，各动态成型条件下的型坯密度明显大于稳态成型条件下的密度。
Results show that the density of green parts under dynamic molding conditions is obviously higher than under steady molding conditions.
复合材料的成型条件如成型时间、成型压力、成型温度等影响基体的浸渍程度。
The processing conditions of forming composites such as time, pressure and temperature influence the matrix's impregnating degree.
介绍了影响合金力学性能的主要因素：原料、 组分的配比、相容剂、成型条件等。
The factors that affect alloy's properties: types of ABS and PC, the ratio of components, compatibilizers and processing conditions are discussed.
研究了热固性不饱和聚酯常温固化制造新型塑料电热板的配方、成型工艺路线与成型条件。
A new pattern plastic galvanothermy board can be made by solidifying heat set unsaturated polyester resin at normal temperature.
分析了电脑按钮塑件的工艺特点、成型方案及注射成型条件，并详细介绍了模具的设计要点。
The technological characteristic of computer button, the design and condition of injection forming were analyzed.
论述了以木质为原料制取颗粒成型燃料的工艺过程和内压滚动式成型机的结构以及成型条件。
The paper discussed the technological process of pelletization of woody fuel, along with moulding condition and structure of moulding machine.
研究探讨了以竹材加工剩余物粉炭、淀粉为原料制造棒(块)状成型炭的工艺过程和成型条件。
This paper studied and discussed the technological process and moulding condition of long (lump) moulding charcoal with biological substance and starch.
以洋葱粉和马铃薯淀粉为主要原料，从原料的配比和成型条件等方面对洋葱脆片的制作工艺进行了研究。
The processing technology of Fried onion chips was studied from the ratio of raw materials to forming conditions using the onion flour and potato starch as the main raw materials.
本文对发光塑料的基材及添加剂进行了选择，重点研究了不饱和聚酯光致发光塑料的成型条件，成型工艺。
The materials requisited luminous plastic and the additive were selected. Do research on technology and condition of processing the unsaturated polyester resin luminous plastic.
从制品结构和模具浇口设计、原材料和成型条件的优选诸方面对长条形注塑件翘曲变形进行了系统的试验研究。
This paper introduces the experimental studies on the warpage of injection molded strip parts in the design of part structure and mold gate and the selecting of molding conditions and materials.
由于材料本身的特性以及复杂的加工条件，塑料注射成型过程加工过程相当复杂。
The process of the injection molding is quite complicated because of the character of the material itself and the complexity of processing conditions.
然而，塑料材料的自有特性和复杂的工艺条件致使注塑成型过程相当复杂。
However, the property of plastic material itself and the complexity of processing conditions make the process of the injection molding quite complicated.
通过调整影响轧膜成型的条件，可以制得具有良好可塑性、均匀度、致密度、光洁度的薄膜。
When the conditions of the roll forming process well controlled, the film of batter plasticity, homogeneity, density and smoothness can be acquired.
简述了塑料精密注射成型的条件和应用实例。
The application examples of precise injection Molding condition were simply introduced.
本文讨论了摇摆滚塑成型中粉料粒径大小、工艺条件等对产品性能、内部结构、氧化物的存在及诸因素的影响。
The influences of powder particle diameter and processing conditions upon the factors like product property, inner structure and existence of oxide in rotational molding processing were discussed.
简述塑料精密注射成型的条件和应用实例。
The application examples and conditions of precise injection molding condition were simply introduced.
目的优选银杏叶提取物分散片的成型工艺条件。
OBJECTIVE To optimize the shaping technology of the Ginkgo extract dispersible tablet.
方法：以滴丸的硬度、外观、表面光滑度、水飞蓟宾的含量为评价指标，采用正交试验法研究滴丸成型的最佳工艺条件。
Methods: the optimum preparation condition were researched by orthogonal test according to the hardness of drop pills, appearance, smooth and the content of silybin.
概述了停留时间、螺杆结构等加工条件和不同成型工艺对制备pcn的不同作用。
Meanwhile, the effects of different compounding process and processing condition such as residence time and screw configuration on PCN were summarized.
炭膜的分离性能与成型压力、粘结剂含量等工艺条件有关。
Separation properties of carbon membrane were affected by binder ratio, moulding pressure etc.
对卡车翼子板滚塑成型原料、工艺条件、制件和模具设计进行了研究。
For rotational molded truck fender, raw material, processing conditions and the design of part and mold were studied.
因此，必须采用烧结性良好的UO_2粉末和合适的成型烧结条件以使开口孔隙度和细孔隙度降至最低。
So that, it is necessary to adopt very sinterable UO2 powder and suitable pelleting and sintering conditions to minimize open porosity and small porosity.
因此，必须采用烧结性良好的UO_2粉末和合适的成型烧结条件以使开口孔隙度和细孔隙度降至最低。
So that, it is necessary to adopt very sinterable UO2 powder and suitable pelleting and sintering conditions to minimize open porosity and small porosity.
应用推荐