钕铁硼合金用真空中频感应炉熔制。
The NdFeB alloy was melted in a vacuum mid-frequency induction furnace and then homogenized.
试样于高频感应炉的氧气流中加热燃烧。
The specimen was heated and burnt in oxygen fluid in high-frequency induction furnace.
合金在有芯工频感应炉熔炼,油压半连续铸锭。
Alloy was melted in channel induction furnace with oil pressure semi - continuous casting ingot.
真空感应炉真空机组中的前级泵,历来使用滑阀泵。
Rotary piston pumps always used as backing pumps of vacuum systems in vacuum induction ovens.
公司有两套25公斤真空感应炉及相配的真空浇注设备。
We have two vacuum Induction Ovens for 25 Kilogram volume and relevant vacuum casting facilities.
本文介绍真空感应炉用微机实现配料调料的计算原理和应用。
The calculation principle and application of microcomputer in charge mixture and modification are introduced in the paper.
本论文的工作内容来自于“真空感应炉控制系统研究”这一课题。
The content of the thesis comes from the research project of "study of the control system of vacuum induction furnaces".
介绍了大功率喷流感应炉的工作原理,炉子主要结构及其技术特征。
The paper introduces the technological characteristic, working principles of W-type giant power electromagnetic induction furnace and the furnace structure.
真空电阻炉用加热元件、空感应炉用各种石墨元件、管炉用的加热管。
The tubular-cased heating element is the same type as those used in cook stoves.
根据大功率工频感应炉的特点,介绍了其在运行中对电容补偿的几点意见。
Some opinion about condenser compensation in operation based on characteristics of large power industrial frequency furnace.
这种由我们自行设计、制造的10l真空感应炉已通过用户验收并出口国外。
This kind of furnace is designed and manufactured by ourselves. Now this furnace is checked, accepted by users and exported.
试样于高频感应炉的氧气流中加热燃烧。使样品中的碳全部转化为二氧化碳,红外检测。
The specimen was heated and burnt in oxygen fluid in high-frequency induction furnace. Carbon in specimen was transformed into carbon dioxide, and then determined by infrared absorption method.
中频感应炉将不锈钢生产中产生的烟尘冶炼镍铬铁,技术上可行,社会效果和经济效益显著。
The technology makes it feasible that nickel-chromium ferroalloys can be produced with the stainless steel fume in medium frequency induction furnace.
坩埚式感应炉酸性炉衬的高温性能,主要取决于所用耐火材料的物理、化学性能及矿物组成。
High temperature performance of acid lining of the induction crucible furnace mainly depends on the physical and chemical properties and mineral composition of used refractory.
讨论了感应炉的感应加热作为传热方程的内热源以及感应电流的集肤效应对数值计算的影响。
The influences of internal heat source, collecting surface effect of induction flux on numerical simulation were discussed.
随着单体设备的不断更新升级,现代冲天炉—感应炉双联熔炼的冶金特性也发生了很大的变化。
With the upgrading of the single equipment, the metallurgical characteristic of modern cupola - induction furnace duplex melting is variable.
本实用新型涉及用于钢液,尤其是用于真空感应炉内钢液所用的测温定氧、定碳取样传感器的改进。
The utility model relates to the improvement of a temperature oxygen measuring and carbon sampling sensor used for melting steel, in particular to the melting steel in the vacuum induction furnace.
按合金组份配制的原料用氧化铝坩埚在真空中频感应炉中熔键成方坯条,再轧制成丝坯,最后拉制成钎焊丝材。
The Starting material is melted and poured into the quadrate billets, then rolled out in wire rods, finally drawn into brazing wire.
在对目前有心感应电炉设计方法分析研究的基础上,介绍了一个用于有心感应炉的高效、可靠、准确的设计程序。
On the study of present design method of channel induction furnaces, the paper introduces an efficient, reliable and accurate programme for designing channel induction furnaces.
通过真空感应炉模拟实验,结合金相分析,研究稀土对于高碳重轨钢奥氏体晶粒尺寸和珠光体片层间距等的影响作用。
Via vacuum induction furnace and metallographical analysis, the effects of RE on the grain size of the austenite and distance of the pearlite laminae of high-carbon steel for heavy rail were studied.
以由铁精矿粉直接还原出来的海绵铁为原料,以非真空感应炉和真空感应炉为冶炼设备,对纯铁的冶炼工艺进行了研究与试验。
Using sponge iron reduced by iron ore concentrate powder as raw material, the smelting process of pure iron is investigated through non vacuum induction furnace and vacuum induction furnace.
布鲁斯表示主要高速钢粉末冶金过程是:加入了预合金化冶炼高速钢成分粉末,经过感应炉熔化,然后气体喷雾造粒制作而成。
Bruce said the main high-speed steel powder metallurgy process: Add a pre-alloyed powder metallurgical high speed steel components, induction-melting furnace, and then made the gas spray granulation.
针对真空感应炉生产过程中温度测量成本较高及精度较差等不足,建立了基于RBF神经网络的真空感应炉终点钢水温度预报模型。
A prediction model of molten steel temperature based on RBF neural network was developed to reduce cost and improve temperature control accuracy for vacuum induction melting.
在管状炉和感应炉中对不锈钢粉尘含碳球团进行加热还原,分析得出其还原度和还原速率与纯三氧化二铬相比达到相同还原程度的温度较低;
The reduction extent and rate increase with temperature, however the temperature is lower at the same reduction extent in pure Cr_2O_3 reduction.
在管状炉和感应炉中对不锈钢粉尘含碳球团进行加热还原,分析得出其还原度和还原速率与纯三氧化二铬相比达到相同还原程度的温度较低;
The reduction extent and rate increase with temperature, however the temperature is lower at the same reduction extent in pure Cr_2O_3 reduction.
应用推荐