感应淬火，精密研磨V型方式的床。
介绍一种新型数控立式通用感应淬火机床。
A new numerical control vertical universal induction hardening machine is introduced in this paper.
分析了板件感应淬火畸变的产生机理和主要影响因素。
The quench deformation mechanism of plate parts as well as the main factors are also analyzed.
碳化、氰化、感应淬火是局部淬火中经常使用的处理方法。
Carburizing, cyaniding, and induction hardening are some of the processes commonly used to produce the case hardening effect.
火焰淬火和感应淬火是经常在大型齿轮上使用的热处理方法。
Flame hardening and induction hardening are the methods usually used to harden larger gears.
分析了预制碎片弹弹体在热处理过程中采用的感应淬火工艺。
The author analysis and discusses induction quenching process used in the process of the thermal treatment for the prefabricate fragment projectile body.
高频感应淬火不能达到硬化冷精锻直齿圆柱齿轮齿面的目的。
The high frequency induction hardening can't raise the surface microhardness of the cold precision forging spur gear.
中频感应淬火试样的摩擦系数略大于激光淬火试样的摩擦系数。
However, the friction coefficient of laser hardened specimens is lower than that of medium frequency induction hardened ones.
感应淬火实现了仿应力强化，提高了扭杆的疲劳极限和使用性能。
The induction quenching realizes imitated stress strengthening, raises fatigue limit and se…
介绍了“钢件感应淬火金相检验”新标准的修订原则、过程和主要内容。
The revising course, principle and major content of the revised edition of "Metaloscopy of the Induction Hardened Steel Parts" are explained in this paper.
根据试验及生产实践经验 ，简述了汽车转向齿条接触式感应淬火的操作方法。
The authors explained a method of contact induction hardening for vehicle steering gear racks, which was based on the experience of actual production and experiment.
在感应淬火中，通过改变加热时间、加热功率和冷却速度可以改变淬硬层深度和硬度梯度。
The hardening case depth and hardness curve can be changed by adjusting heating time, heating power and cooling speed during induction hardening.
感应淬火的目的已从仅仅提高零件的局部耐磨性扩大到提高零件的整体静强度和疲劳强度。
The aim of induction quenching has been enlarged from only improving local wear resistance to improving whole static strength and fatigue strength of parts.
特殊的材料包括球墨铸铁和钢煅品，大部分机轴经过热处理，表面硬化、渗氮和感应淬火。
Typical materials include ductile iron castings or steel forgings. Most crankshafts require some form of heat treating including case hardening, nitriding and induction harden.
表面感应淬火提供有选择地淬硬部件滚道而部件的其余部分则不受淬火过程的影响的可能性。
Surface induction-hardening offers the possibility to selectively harden a component's raceway, while leaving the remainder of the component unaffected by the hardening process.
首次把感应淬火所产生的残余应力添加到了曲轴的模型里，计算了淬火前后的疲劳强度与寿命。
For the first time, the paper adds residual stress produced by hardening to the model. Then prequench crankshaft and postquench crankshaft are fatigue analyzed.
利用RAYTEK红外测温仪测量了汽车半轴中频感应淬火时不同电参数情况下的表面温升曲线。
The surface temperatures of half-shafts of car under variant parameters during induction heat treatment were measured by using RAYTEK infrared temperature sensor.
介绍数控曲轴旋转感应淬火机床控制系统的软、硬件组成和系统设计中主要难点问题的解决方法。
The paper introduces the software and hardware of control system of NC rotary inductance quenching machine for crankshaft and solving process for main problems in generating gear with system design.
介绍锻钢冷轧工作辊双频感应淬火设备特点，国内首创较低的中频频率的选定，与同类淬火设备比较的优点。
This paPer introduces the equipments of double-frequency induction heating the forged steel cold work roller, and compare with the same kind induction heating equipments.
本研究针对常用的灰铸铁及球墨铸铁材料分别进行激光处理、感应淬火和氨化处理，然后进行耐磨性对比试验。
This paper is the research of wear resistance for the specimen of grey cast iron and nodular iron by laser treating, induction hardening and nitrocarburizing.
对齿轮的调质、渗碳淬火、渗氮及感应淬火四大热处理工艺的应用范围、影响因素及工艺控制要点进行了分析。
The application, influence factors and process control of four kinds of heat treatment methods including tempering, carburizing, nitriding and induction quenching are analyzed.
论述了感应淬火零件的残余应力形态，并对载货车半轴的材料、硬化层深度及法兰圆角淬火层分布提出了个人见解。
This paper demonstrates residual stress of induction quench parts and personal views about stress distribution of flange corner heat treatment, truck half axle material and depth of hardened layer.
美式结构，刀头优质碳钢锻压，整体热处理，刃口高频感应淬火，刀片上偏心螺栓调节间隙，剪切硬度HRC30。
American type, drop-forged blades with high quality carbon steel, body heat treatment, cutting edges induction quenched, easy adjustment, cutting abilityHRC30.
磨削强化处理技术是利用磨削热替代高、中频感应淬火热源对钢件表层进行强化处理，将磨削加工与表面强化合为一体。
Grinding hardening, the technology of hardening steel piece surface with grinding heat instead of high or medium frequency induction hardening heat, can integrate grinding surface hardening.
在托轮轴的加工工艺中，对钢轨表面的中频感应淬火是一道关键工序，淬火处理的质量决定了托轮轴的使用效果和寿命。
Processing technology to shore up the axle, the right rail Induction surface hardening is a key process, quenching determines the quality of care dealing with the use of effects and life axle.
利用A NSYS有限元分析软件，进行了6 110钢曲轴的中频感应淬火过程的模拟计算，并预测了淬硬层的深度，计算了淬火后的残余应力分布。
The simulation on medium frequency induction hardening process of crankshaft in 6110 engine is carried out by using FEA software ANSYS with hardening depth predicted and residual stress calculated.
在成套泵筒感应热处理设备中，淬火机床对满足性能要求起着关键作用。
During induction heat treating of pump tube, quenching machine tool plays a key role to fulfill the required properties.
感应加热是表面淬火最理想的一种加热方式。
Induction heating is the ideal surface quenching a heating method.
采用感应加热研究X 70控轧钢弯管二次加热力学组织、力学性能随着淬火温度、回火时间的变化规律。
Using the method of induction heating, the regulation of the variety of X70 controlled rolling steel bends'mechanics structure and mechanics property in secondary heating is investigated.
采用感应加热研究X 70控轧钢弯管二次加热力学组织、力学性能随着淬火温度、回火时间的变化规律。
Using the method of induction heating, the regulation of the variety of X70 controlled rolling steel bends'mechanics structure and mechanics property in secondary heating is investigated.
应用推荐