悬浮法是工业生产聚氯乙烯的最主要的方法。
Suspension polymerization is the main way in industrial production of PVC.
对悬浮法PV c聚合釜热水进料技术进行了比较。
Hot water feeding processes for suspension PVC polymerizer were compared.
开发了一种新的低成本防团聚方法——泡沫悬浮法。
A new anti-agglomeration method with low cost was developed.
悬浮法生产的粒状热塑性酚醛树脂可以取代进口树脂。
The granular thermo-plastic phenolic resin produced by suspension polymerization could replace the imports.
悬浮法是较好的制备纤维增强ABS复合材料的方法。
This method is a better method for the preparation of fiber reinforced ABS composite.
悬浮法是较好的制备纤维增强ABS复合材料的方法。
This method is a better method for the preparation of fiber reinforced ABS compos...
该方法利用反向悬浮法进行蛋白质大分子聚合物的制备。
The method takes advantage of reverse suspension to prepare protein macromolecule polymers.
对泡沫悬浮法和共沸蒸馏法的防团聚效果进行了系统比较。
The nano sized TiO2 powder prepared by foam flotation method was compared with the sample prepared by azeotropic distillation method.
对泡沫悬浮法和共沸蒸馏法的防团聚效果进行了系统比较。
The nanosized TiO2 powder prepared by foam flotation method was compared with the sample prepared by azeotropic distillation method.
在悬浮法聚氯乙烯实际生产中应用此产品，取得较好的效果。
Performance of the product was demonstrated in a PVC plant and sat…
因此探讨了上述分散剂对悬浮法聚氯乙烯树脂颗粒特性的影响。
Thus discusses the effect of the dispersant on particle characteristics of PVC...
研究了制备悬浮法酚醛树脂的各种因素对酚醛缩聚反应速率的影响。
The factors effecting on the reaction rate of phenol-formaldehyde condensation by suspension polymerization have been studied systematically.
以制浆黑液的碱木素为原料，采用反相悬浮法，制备出球形木质素珠体。
The black liquor from the pulping process was adopted to prepare the spherical lignin beads, denoted as SLB, by the reversed-phase suspension technique.
本文研究了介质悬浮法中悬浮体系的组成即纤维、热塑性树脂和助剂等。
This paper studies the composition of suspension system, i. e. , fiber thermoplastic powder and auxiliary additives.
用悬浮法培养4 ~5天，细胞保持完整的形态结构，用贴壁法细胞可培养数周。
The cells can keep its structure and morphology in 4-5 days usings...
研究了水相悬浮法合成环氧化反式-1，4-聚异戊二烯（ETPI）的结构与性能。
Structure and property of epoxidized trans-1,4-polyisoprene(ETPI) by water phase suspension method was studied.
研究了苯乙烯中苯乙炔、聚合物和甲基苯乙烯三种杂质对悬浮法聚苯乙烯粒径的影响。
The effects of impurities such as phenylethyne, polymer and methyl styrene on particle diameter of polystyrene manufactured by suspension polymerization were analyzed .
介绍了悬浮法生产的聚四氟乙烯细粒度树脂的性质，成型加工方法及在实际中的应用。
This article mainly describes the polytetrafluoroethylene fine powder resin by suspension method, process method and actual application.
采用水悬浮法对蒙脱石原土进行钠离子交换反应和提纯处理得到纯度较高的钠型蒙脱石。
An Na-montmorillonite with high purity was obtained by the water suspension method using the ion exchange reaction and suspension purification treatment.
介绍了PV C树脂悬浮法生产过程中搅拌工程的改造及分散剂用量对树脂性能的影响。
It was reported that the mixing engineering of PVC resin with suspension method in production was improved, and the effect of disperser quantity on resin properties was introduced.
采用悬浮法合成了高选择性的吡啶氯化氨基树脂，并通过吸附铜离子实验评价其吸附性能。
Pyridine amino resin of high selective absorption for copper ion was synthesized by the suspension method, and its absorption properties were evaluated by absorption experiment of copper ion.
介绍了悬浮法聚氯乙烯生产过程中聚合单元、单体回收单元和汽提干燥单元中的一些操作技巧。
Some skills on suspension PVC production process were introduced, including polymerization unit, monomer recovery unit, stripper and drying unit.
悬浮法酚醛树脂结合剂具有强度高、耐热性好、颗粒粉末细、分散流动性好及使用方便等特点。
Phenolic resin bond synthesized with suspended technology has some super characteristics such as high strength, heat-resistance, finer particles, dispersing flowability and easier application.
该工艺完全可以采用悬浮法pvc的加工装置进行加工，而且加工容易、产品质量好、成本低、效益显著。
The units of suspension PVC could be used in bulk PVC process. And quality of products and the returns were better. The cost was low.
研究了各种影响悬浮法PV C树脂白度指标的因素，并有针对性地提出了提高树脂产品白度的各种措施和对策。
This article study all kinds of element affect the whiteness of PVC resin by suspension method, and aimed to put forward some measures to increase the whiteness of the resin product.
对悬浮法生产聚氯乙烯树脂过程的粘釜和防粘釜机理进行了分析，介绍了目前国内外防粘釜技术的研究及应用情况。
Mechanisms of fouling and antifouling in suspension polymerization for PVC Production were analysed. The research and application of antifouling technology at home and abroad were introduced.
悬浮法pvc生产过程中产生的离心母液中含有少量pva等可溶性高分子化合物，采用传统的混凝法和过滤法很难将其有效去除。
The mother liquid from the suspension production of PVC contained a small quantity of solvable polymer, such as PVA. It was difficult to remove PVA by traditional coagulation and filtration method.
采用水相悬浮法氯化高全同聚丁烯-1（HIPB-1），其氯化产物氯化高全同聚丁烯-1（CHIPB-1）通过差示扫描量热法进行测试和分析。
High isotactic polybutene-1(HIPB-1)was chlorinated by aqueous suspension method. Chlorination products CHIPB-1 were tested and analyzed through DSC.
采用悬浮液法或直接加入法制备了CSBR胶乳/AT混合物，研究了AT对混合物粘度和流变性能的影响。
AT was added into the CSBR latex directly or though a suspension method, and the effect of AT on the viscosity and rheological behavior of the latex was studied.
将悬浮液进样技术应用于火焰原子吸收光谱法，成功地测定了面粉中的钙、镁。
Suspension sampling technique was applied to flame atomic absorption spectrometry and was successfully used to determine calcium and magnesium in wheat flour.
应用推荐