实验还得到了微槽强化传热的最佳优化尺寸。
Optimal groove geometrical size for phase-change heat transfer is also found in experiments.
设计并加工带有微孔和微槽的精密模压模具。
First, the precision coining mold with micro-hole and micro-slot were designed and manufactured.
介绍了基于微机电一体化系统（MEMS）的微槽冷却系统的研究成果。
The research on microchannel cooling system based on MEMS was introduced in this paper.
该垫还可包括具有多个微槽的第一表面，其中可溶纤维在垫中形成微槽。
The pad may also pad include a first surface having a plurality of micro-grooves, wherein the soluble fibers form the micro-grooves in the pad.
实验确定了获得最大热流密度时的微槽表面尺寸为槽宽、槽深以及槽间距分别为0。
When the maximum heat flux density is acquired, the experiment confirms the groove surface size as follows: 0.
微槽平板热管虽然结构简单，但内部发生的物理过程十分复杂，有些机理尚未达成共识。
Although the structure of microchannel plate heat pipe is simple, the physical process taking place within them are complex. Experts have not yet reached a consensus on some mechanism.
最后，本文针对微槽切削加工过程，分析了切削参数和刀具磨损对工件毛刺形成的影响。
Finally, the influence of cutting parameters and tool wear on burr formation are studied through the experiment of machining micro-flute.
考察了催化剂涂层的配比、反应温度、水醇比、进料速度、反应时间对甲醇重整微槽道反应器性能的影响。
The effects of catalyst composition, reaction temperature, space velocity, molar ratio of methanol to water, and reaction time on the performance of the microchannel reactor were investigated.
对高热流密度芯片的冷却要求进行了分析，采用有限元方法对微槽道冷却热沉的传热性能进行了数值模拟。
The finite element method is then used to numerically simulate the heat transfer performance of microchannels cooling heat sink.
对三种微槽平板热管的传热性能进行了实验研究，分析了充液率、工质的种类、槽道形状对微槽平板热管传热性能的影响。
The performance of three kinds of flat miniature heat pipes is studied experimentally and the factor such as the charging ratio, working fluid and groove structure are analyzed.
刘泽林在猫咪爱好者微信群里对家里的两位主子一顿吐槽，但是她却被告知她两只猫咪的行为在同样毛色的猫科动物中很典型。
After she had complained about her two cats in a WeChat group for cat lovers, Liu was told that the behavior of her cats was typical of felines with their coat color.
2014年，蔡跃栋开始在微博上发关于不同星座的人的吐槽文。
In 2014, Cai started to release posts on Weibo satirizing the characteristics of people with different star signs.
在井内加压下进行水泥胶结测井带压作业，其目的是将微环空与串槽区分开。
The purpose of cement bond log (CBL) under increasing borehole pressure is to differentiate micro annulus from bypass channel.
采用微磨料气射流加工技术(MAJM)，对普通硅酸盐玻璃进行微流道槽加工。
The micro abrasive jet machining (MAJM) technology was used to make micro channels on the glass.
利用微弧氧化技术对ZL 108铝合金活塞第一道环槽进行了陶瓷化处理。
The ceramic treatment for the first ring groove of ZL108aluminum alloy piston was conducted with micro-arc oxidation technique.
目的：介绍并总结微螺钉在牙槽外区域植入的应用方法。
Objective:To introduce and conclude the application of micro-screws in extra-alveolar bone area.
水在微尺度槽道中单相流动和换热的研究，是通过对其流动阻力和换热强度等的实验进行的。
Experiments to investigate the heat transfer and fluid dynamic characteristics of water flowing through micro channels were conducted.
目的：分析微螺钉作为骨性之抗在牙槽外区域种植的部位及其临床应用。
Objective:To conclude the application of micro-screws as skeletal anchorage in extra-alveolar bone area.
本文引用考虑微尺度效应的雷诺方程，推导出了考虑微尺度效应的螺旋槽干气密封内部流动的近似算法。
Based on the Reynold's equations with the micro scale effects considered, a new kind of approximate algorithm for the inner flow of the spiral grooved gas seals was set up in this paper.
微反射镜和V型光纤定位槽的自对准由同一块掩膜板实现。
The device is composed of a vertical mirror, a cantilever and V-grooves.
从液槽中引出一些聚焦流体以对模具液槽中的微珠进行浓缩。
Some of the focusing fluid is drawn from the fluid bath, so as to concentrate the microbeads in die fluid bath.
作者在玻璃上进行微磨料水射流微细槽加工的实验基础上，对微磨料水射流加工的表面形貌、材料冲蚀去除机理及加工工艺性能进行了研究。
This paper presents a study of using micro-abrasive water jet for the machining of micro-channels on brittle glasses. The erosion mechanism, surface pattern and process performance are studied.
采用JXA-840A分析了微加工形貌，表明微腔（槽）表面留有一层致密的硬化层，且与基体结合良好。
The micro-structure of cutting grooves was analyzed with JXA-840A. It is found that the treated layers of grooves have a fine hardness property and good joining strength with the base metal.
并得到了微尺度槽道的尺寸、结构形状和流体流动均匀性对其流动和换热的影响规律。
It is also concluded that the dimensions, structures and flowing regularity have affections on heat transfer and fluid dynamic characteristics in micro channel...
综述了铜在芯片微刻槽中电沉积填充的过程、机理 ，并着重讨论了实现无裂缝和无空洞理想填充的主要因素—镀液的组成和添加剂的影响。
The procedure and mechanism of copper filling in the trench of the chip are reviewed, the effect of electrolyte components and additives on superfilling are discussed.
综述了铜在芯片微刻槽中电沉积填充的过程、机理 ，并着重讨论了实现无裂缝和无空洞理想填充的主要因素—镀液的组成和添加剂的影响。
The procedure and mechanism of copper filling in the trench of the chip are reviewed, the effect of electrolyte components and additives on superfilling are discussed.
应用推荐