伞绳和伞衣处理成非线性弹性构件。
The radial members and gores are regarded as non linear elastic materials.
发光二极体包括发光面、侧壁和弹性构件。
The light-emitting diode comprises a light-emitting surface, a lateral wall and an elastic component.
弹性构件设置于侧壁，并具有垂直该侧壁方向的弹力。
The elastic component is arranged on the lateral wall and has elastic force vertical to the direction of the lateral wall.
转换层视为弹性构件，整个分析过程中均取其等效刚度。
Transfer story is considered as elastic member in time-history analysis, its lateral stiffness is taken to be equal to the equivalent stiffness.
转换层视为弹性构件，整个分析过程中均取其等效刚度。
Transfer storey is considered as elastic member in time-history analysis, its lateral stiffness is taken to be equal to the equivalent stiffness.
头发固定夹还包括设置在第一和第二夹件之间并连接到其间爪形部分的弹性构件。
An elastic member is disposed between the first and second clip members and connects to the claw portions thereof.
弹性构件输出点的应变峰值降低了近60%，机敏机构的动力学品质得到显著改善。
The strain crest of the flexible coupler is reduced 60 percent and the dynamic performance of the smart mechanism is improved significantly.
在门关闭时，上述弹性构件将与滚筒洗衣机的主体接触，并通过弹性 压缩吸收冲击。
When the door is closed, the elastic component contacts with the main body of the drum-type washing machine, and the impact is absorbed by elastic compression.
在到达其弹性极限之前，这种材料可被扭曲的程度大约是由它取代的钢铁构件的20倍。
They can be distorted about 20 times as much as the steel components they replace before they reach their elastic limits.
在经典的刚架弹性稳定理论基础上推导了考虑节点刚度的四弯矩方程和构件群稳定方程，并将其应用于桁架结构。
Based on classic elastic stability theory of framework, the four-moment equation and the stability equations of member group considering joint rigidity are derived and extended to study trusses.
把线弹性断裂力学的理论应用到高强混凝土压剪构件的开裂强度分析中，建立相应的计算力学模型。
Applying theory of linear elasticity fracture mechanics to the analysis of high strength concrete (HSC) compress shear member's cracking stress, a corresponding model is established in this paper.
现代抗震设计思想允许相应的钢筋混凝土结构构件的控制部位在强烈地震作用下进入屈服后非弹性变形状态。
According to the modern seismic conception, the critical zone of the RC member can be in the state of inelastic deformation after yield under strong motion.
对于构件端部的非弹性铰，使用了半耦合的损伤函数与屈服函数。
Half-coupling damage and yield functions are adopted for non-elastic hinges at the ends of structural members.
分析结果表明，大震作用下，在其他构件进入塑性的情况下，连体部位依然保持弹性。
Analysis results show that the connected structures remains elastic under the action of seldom occurred earthquake while the other members have turned into inelastic.
破坏时结构变形主要集中在节点上，节点钢板达到屈服强度，而木构件处于弹性工作状态；
The deformation of the structure will mainly concentrates at the joints when structural damage occurs. The timber members remain elastic while the joint steel plates yield.
大型整体薄壁构件的筋板在数控铣削加工过程中将产生变化的弹性变形，用常规的有限元软件直接分析很费时费力。
Rib in large thin-walled structures will generate elastic deformation in NC Milling, it is very inconvenient to analyze the elastic deformation by conventional method directly.
基于薄板的弹性稳定理论，确定了在纯弯状态下空腹受弯钢构件孔口上方腹板和孔间腹板的最大高厚比。
Based on elastic stability theory of thin plate, the maximum high-depth ratio of these two kinds of web under bending is deduced.
采用最优性准则方法，给合结构优化设计中的双因子算法，有效地解决了给定弹性机构某几阶固有频率时设计构件截面参数这类逆特征值问题。
Combining with the optimality criterion method and the bi-factor algorithm, the inverse eigenvalue problem for optimal Parameters design of elastic mechanisms is solved effectively.
通过进行ADAMS与ANSYS之间的双向数据交换，对该喷管弹性机构构件进行了动态应力分析。
Through bidirectional data interchange between ADAMS and ANSYS, dynamic stress analysis of this elastic mechanism is conducted.
导出了粘贴压电材料和粘弹性材料构件的有限元方程；
The FEM equation of flexible mechanisms with boned piezoelectric material and viscoelastic material is derived.
金属橡胶因此类金属构件具有类似橡胶的弹性而得名。
Metal-Rubber (MR) is a metal material, and its elasticity is similar to that of rubber.
本文从对楼板刚性反应最敏感的构件(即框剪结构的底层中间框架)按刚、弹性计算的剪力误差值的分析入手，建立了一个由弹簧支承的水平深梁的模型。
A deep beam model with spring bearing is given, based on the analysis of middle frame of frame and shear wall structure ground floor, which is sensitivity to floor rigidity.
关键构件中震弹性或中震不屈服的设防目标，作为一种加强措施在抗震设计中已经得到了应用。
Currently, the target objective of unyielding during the design earthquake is defined and has got application to the key components in seismic design, as the measurement to enhance their strength.
构件预应力局部影响区与混凝土弹性模量，梁截面尺寸等因素有关。
The part influencing area of prestressing force is related to such factors as concretes elastic ratio, beams sectional dimension and so on.
其中的一个新牌号可粘合到热塑性弹性体(TPE)系统以及现有的EPDM橡胶异型构件上。
One new grade adheres to thermoplastic elastomer (TPE) systems and to existing EPDM rubber profiles.
提供一种充电构件，其具有支承体、形成于该支承体上的导电性弹性层和形成于该导电性弹性层上的表面层。
A charging member is provided having a support, a conductive elastic layer formed on the support and a surface layer formed on the conductive elastic layer.
构件边界上的应力可由弹性体的边界应力和边界面力的关系，通过物理方程和几何方程求出。
The stresses at the boundary can be calculated by the physical equation and the geometric equation according to the correlation between the stresses and the traction at the boundary.
应力回线的长短会影响机械构件弹性变形的大小，在机器或机构设计中，通过改变应力回线的长度，从而提高机器的刚度和工作精度。
In the design of machine, changing the length of stress close-line can improve the rigidity and working precision of the machines.
该可压碎构件可包括可塑性变形的第一部分和可弹性变形的第二部分。
This crushable member can include a plastically deformable first portion and an elastically deformable second portion.
该可压碎构件可包括可塑性变形的第一部分和可弹性变形的第二部分。
This crushable member can include a plastically deformable first portion and an elastically deformable second portion.
应用推荐