除应变仪之外，所有要求能够应付信号处理及通信的电子设备都被植入硅胶镜片内(见图)。
In addition to the strain gauge, all the electronics required to handle the signal-processing and communications are embedded within the silicone lens (pictured).
本文推导了应变仪的频率特性。
In the paper, the frequency response of strainmeter is derived.
使应变仪直接与样本相连接。
传统的例子是应变仪装置。
应变仪坚固地固定于结构的一个部位上。
现代应变仪则由网格形式的金属片组成。
分析了动态应变仪的测量原理和调平衡技术的原理。
It analyses the measuring principle of dynamic strain gauge and introduces the principle of adjusting balance.
第五章阐述了应变信号处理模块的设计与应变仪的抗干扰设计。
Fifth chapter elaborates the design of strain signal processing module and strain gauge's antijamming design.
第四章主要阐述了应变仪信号测量电路及电桥电源电路的设计方法。
Fourth chapter mainly elaboratess the signal conditioning circuit of strain gauge and the supply circuit of strain bridge system's design methods.
应变仪测试成形力的结果表明，工艺编排及工装设计是问题的关键。
Stresses measured with strain gages indicate that the key problem lies in the programming of technology and the design of tools.
为了解决这个问题，我们改变了应变仪配置，缩短了用于应变测量的距离。
To resolve the problem, we changed the stain gauge arrangement and shortened the distance used for strain measurement.
本文介绍了洞室定点高精度地应变仪网络化的实现过程，并给出了应用实例。
This essay emphasized the implementation of intellectuality and network of the high precision ground strain gauge and presented examples of application.
本文简述了YC-1型遥测应变仪的工作原理，讨论了电路设计中的有关问题。
This paper describes the working principle of YC-1 telemetrical strain amplifier. The design of circuits is also discussed.
从动态应变仪的工作原理出发，研究了动态应变模拟信号的产生方法及其设备。
This paper will research the method and devices of generating dynamic strain simulative signal from the working principle of dynamic strain amplifier.
采用应变片来量测裂纹尖端的应力集中现象，利用电阻应变仪来读取应变与压力值。
Strain gauges are applied to measure the stress intensity around the crack tips. Strain and pressure are measured by electrical resistance strain gauges.
在冻结温度下，应用YE2538型程控静态电阻应变仪测试了不同材料的弹性模量。
Freezing elastic ratios of materials were measured by the YE2538 programmable static strain gage.
研究了应变仪在使用过程中需要扩大量程时常用的几种方法，同时分析了几种方法的误差。
Some methods are developed to extend the measure bound of the strait gauges in use. And the errors of these methods are analyzed.
通过对西昌台压容应变仪原始观测数据进行处理，突出了该系列地震的应变短临异常信息。
Initial observation data from Xichang strain observation station are processed and the strain short-impending anomaly information about the earthquakes are manifested.
设计了与这种传感器配用的，适合于动、静态测量的土壤应变仪，给出了它的主要性能指标。
The structure and main specifications of the instrument designed for the measurements of both static and dynamic strain in soil are presented here.
应用大型平面应变仪，进行了灰岩及细砂岩两种堆石的风干料及饱和固结排水平面应变试验。
The rockfill materials of limestone and fine sandstone were tested by large scale plane strain apparatus in air dry and saturated state respectively.
本文对先后安装在营口地震台的伸缩仪和分量钻孔应变仪的同步观测数据进行了比对和分析。
In this article we have made analyses and comparisons of synchronized data from an extensometer and a 4-component borehole strainmeter at Yingkou seismological station.
介绍了YCD - 1型超动态应变仪的研制、设计原理和主要特点，及在爆破近区应变测试中的应用。
This paper describes the development, design principle and main features of type YCD-1 ultra-dynamic strain gauge, and the application of it to strain testing in the near-blasting field.
利用“八五”攻关成果提供的方法，对西昌地震台1995 ～1997 年压容应变仪原始观测数据进行了处理。
Observation data of P C type strainmeter at Xichang seismic station from 1995 to 1997 are processed by using a new method in fruit of the Eighth Five year Plan Period.
轻便的轮重仪。带数字显示装置的手动面板。丝式应变计测量方法。
Handy light-weight wheel load scale. hand panel with digital display unit. wire strain gauge measuring method.
利用自行改装后的三轴蠕变仪对海相沉积的营口软土进行蠕变试验，获得了在不同围压、不同偏应力条件下的剪切应变与时间关系数据。
The relationship between shear strain and time of Yingkou soft soil is obtained under a series of different cell pressures and different deviator stresses.
现场实验结果显示FBG应变管的测量结果与测斜仪的测量结果非常吻合。
According to field trials, measurement results of FBG strain tube are mostly agreeable with these of declinometer.
因此，本文从研制高精度中型动三轴仪入手，采用微小应变测试技术，以实现这一目标。
In this thesis, the medium scale dynamic triaxial apparatus, with micro strain measure technique, is developed to realize the aim.
目的研制电阻应变式口腔黏膜压力测痛仪，并对正常年轻人的牙龈黏膜疼痛阈进行测试。
Objective To develope a new instrument with a pressure sensitive strain gauge for measuring the pain perception threshold of oral mucosa.
根据弹性力学原理，基于应变不匹配，提出了一种可以预测薄膜残余应力分配的理论模型计算方法，并将计算结果与干涉仪测量值进行了对比。
Based on the principle of elasticity and strain misfit, a new calculation method of theoretical model to predict the residual stress distribution on optical thin films is put forward in this paper.
根据弹性力学原理，基于应变不匹配，提出了一种可以预测薄膜残余应力分配的理论模型计算方法，并将计算结果与干涉仪测量值进行了对比。
Based on the principle of elasticity and strain misfit, a new calculation method of theoretical model to predict the residual stress distribution on optical thin films is put forward in this paper.
应用推荐