在此对接触应力计算作较为全面的讨论。
Over all discussions will proceed to the calculation of contacting stress here.
本法亦可近似用于等壁厚锥壳与平法兰连接的应力计算。
The method can be also applied to the stress analysis of a conical shell with uniform thickness connected with flanges.
提出了非饱和黄土和饱和黄土的有效应力计算的简化公式。
Simplified formulas for the effective stress calculation of unsaturated loess unsaturated loess are proposed.
以上所提到的热应力计算均考虑了生长界面对应力的影响。
All calculations above consider the effect of the growing interface shape.
这种方法应力计算准确，因而回弹计算结果具有较高的精度。
The stresses calculated by static implicit method are accurate, so the results of springback simulation with high precision can be achieved.
本文提出一种压力泵中电磁马达含外壳的衬套应力计算新方法。
In this article a new calculation technique for stresses in the bush sleeve (shell), strengthened by a case, pulled on it, in the electromotor of the pressurized pump is offered.
建立了充满稳定状态下密实织物伞形状和应力计算的理论模型。
A theoretical model of solid parachute canopy shape and stress computation under inflation and steady state conditions has been built.
并采用ANSYS软件对其受力复杂的零件连杆进行了应力计算。
Stresses within the connecting rod which bears complex forces are calculated by ANSYS Software.
对齿轮齿面接触应力计算中曲率系数的计算依据作了进一步的研究。
Further study of the calculation basis of curvature coefficient for calculating the surface durability stress are made.
圆柱形压力容器斜接管的应力计算还没有一个简便可行的计算公式。
There was no simple method to calculate the stress of oblique nozzle in the cylindrical pressure vessel.
在计算与分析的基础上，给出了常用参数范围内的剪应力计算诺模图。
Based on the calculation and analysis, the abac for shearing stress calculation in the range of normal parameter is obtained.
碳纤维制自行车是有前途的，通过应力计算会找到最适合的加工条件！
Carbon fiber of bicycle is promising, through the stress calculation can find the most suitable processing condition!
在考虑这一特点的基础上，建立了套管应力计算的力学及有限元模型。
Based on this point, the mechanics and finite element models for casing stress calculation are established.
论述了恰甫其海水电站压力钢管进人孔边界效应分析与具体应力计算。
The paper deals with boundary effect analysis and concrete stress calculation of manhole for steel penstocks in Qiapuqihai hydropower station.
普通截锥壳单元是分析旋转壳结构的常用单元，但应力计算的精度较差；
The ordinary truncated element is widely adopted in engineering for analysis of revolutionary shell, but it has low precision on the calculation of stress and strain.
许多热采井套管热应力计算模型忽略了地层影响，属于单轴热应力分析。
Most of the models calculating casing thermal stress in thermal recovery well belong in a monoaxial stress analysis because of neglecting the effect of formation.
本文就保温墙体变温环境下温度场、温度应力计算为基础编制了工程用软件。
This thesis develops an engineering software to calculate the temperature field and temperature stress under the varying temperature environments of insulation walls.
作者采用有限元法对易损部位进行了应力计算，证明该部位的强度没有问题。
By the use of finite element method, the stress calculation of damageable zone was conducted by the author, and proved that the strength of that zone had no problem.
通过接触仿真分析研究了通用接触单元在轮齿变形和接触应力计算中的应用。
By the contact simulation analysis the applications of the general contact elements in the calculations of the tooth deformation and contact stress of gears have been investigated.
本文对于承受爆炸、冲击等瞬态载荷作用下的结构动应力计算也有参考价值。
This method has reference values in analyzing the dynamic stress in some structure under transient loads such as blast and impact.
本文对于承受爆炸、冲击等瞬态载荷作用下的结构动应力计算也有参考价值。
This method has reference values in analyzing the dynamic stress in some structures under transient loads such as blast and impact.
讨论了混凝土收缩简化计算方法及混凝土徐变对温度及收缩应力计算的影响；
The paper studies the simplification calculation method of concrete shrinkage and the calculation of temperature and shrinkage stress that takes the effects of concrete creep into account.
结合和平大桥工程实例，开展了施工单位拟定的拱架加载程序变形与应力计算。
Taking Heping Bridge engineering as an example, the deformation of arch scaffolding loading procedure and stress calculation of drafted by construction units are carried out.
无粘结筋的变形不符合平截面变形假定，因此由外荷载引起的应力计算比较复杂。
The computation of stress resulted by external load is relatively complex because the deformation of unbonded prestressed strand cannot comply with the plane section assumption.
温度应力计算时应考虑混凝土浇筑时间的不同、后浇带的设置对温度应力的影响。
While calculating the thermal stress, the influence of concreting time and the arrangement of post-pouring belt on the thermal stress should be considered.
讨论了与冰晶体压力相关的相变温度变化对空间离散系统数值积分和应力计算的影响。
The paper also deals with the influence of pressure variety of ice crystal on temporal integral step-length and calculation of stress-field.
应用轴对称弹性理论建立了陶瓷内衬多层复合身管的数学模型，编写了其应力计算程序。
Mathematical model of multi-layer composite artillery barrel with ceramic liner was built by using axisymmetric elastic theory, and stress computer program of the composite barrel was developed.
应用弹性力学理论，推导出接触点的曲率半径，对三弧段等距型面联接进行接触应力计算。
The curvature radius was derivated and the contact stress of the three-arc-sect isometric type surface was calculated through the elastic dynamics theory.
该文采用具有自由水面和河床切应力计算的三维数学模型分析了桥墩群对河道水流的影响。
A three-dimensional numerical model with free water surface and wall shear stress was used to analyze the water flow affected by piers.
对于闽北中小型设计单位来说，一般是采用北京院的拱坝应力计算软件GADAP进行计算。
The middle or minute designing departments in Mingbei generally use the computation software "GADAP" authored by Beijing courtyard to calculate the stress of arch dam.
应用推荐