计算了对称和不对称加载的无粘结预应力连续梁的应力增量。
The stress increments of unbonded prestressed tendon in the continuous beams subjected to both symmetrical and asymmetrical loads are analyzed.
目的探讨均布载荷作用下简支、连续梁桥体外力筋应力增量的简便计算方法。
Calculation method of simply supported to continuous girder bridge is analyzed and compared with load test.
围绕断层扩展部位剪应力增量场呈八瓣式分布,平均应力增量场呈四象限分布。
Around the propagating fault segment the disturbed stress field of maximum shear stress displays an eight petal pattern and that of mean stress displays a four quadrant pattern.
本文研究的次应力包括主缆局部弯曲应力和超出平均应力的钢丝不均匀应力增量。
The bending stress and the stress increment of uneven loaded wire stress above the average stress are taken as secondary stress in the thesis.
从理论上说明塑性应变增量的方向不仅与应力的主方向有关,还与应力增量的方向有关。
The theoretical result shows that the direction of plastic strain increment is determined by the direction of principal stress and stress increment.
发震断层面上潮汐有效剪切应力增量的数值计算是应用响应比理论的一个关键性基础问题。
The numeric calculation of the tide-effective shear stress on the seismic fault plane is a key to the application in the load-unload response ratio theory.
应变路径理论与传统的增量理论不同之处在于其偏应力增量和偏应变增量之间为一非线性关系。
The strain path theory is different from the plastic flow theory since it gives a nonlinear relation between stress deviation increment and strain deviation increment.
而体外索在不同荷载形式及其大小、作用位置等因素影响下的应力增量就成为一个重要的研究课题。
Thus the stress increment of the external tendons under the action of various loads type and size and its location has become an important research project.
此外,还对FLAC - 3d内嵌的本构模型深入研究,塑性流动发生时塑性应变增量对应力增量的修正。
In addition, the constitutive models included in FLAC-3D are deep into research, and the stress increments are corrected in terms of the plastic strain increment while occurrence of plasticity flow.
利用常规有限元法确定增量位侈,然后再根据余虚功原理求得后屈曲复合材料受剪板的应力增量和应变增量。
The rigidity of the equivalent shear panel is equal to the incremental rigidity of the post-buckled composite shear panel, while the latter is determined by th…
它与夸脱理论相结合,得到了在角点处的塑性增量应力应变关系,在角点上剪应力增量与剪应变增量间是单值确定的。
Then the increment stress - strain relation of plasticity on the corner of the yielding surface is presented by the Koiter theory which is connected with the above hardening function.
从土体极限应力状态线所致的各向异性出发,结合原状土的力学特性,给出了原状土的应力空间、应力增量变换公式。
Based on the anisotropy induced by the critical state line, the idea of transformation of stress space is presented.
对非饱和砾质土心墙料做一组等应力比和等应力增量比为常数的试验,发现邓肯-张模型基本能反映该应力路径下的应力应变关系。
Analyzing the test results, the Duncan-Chang model can basically reflect the coarse grained soil's stress-strain relationship under the stress path of dam.
采用塑性增量理论,建立了波纹管液压胀形的应力、应变数值计算方法,解决了波纹管液压胀形工艺的理论计算问题。
By plasticity increment theory, the stress strain numerical calculate methods of bellows bulge forming, solvers theory calculating problems of bellows bulge forming technology are put forward.
指出了其基本的问题是其中应力(应变)或者其增量是否为一有势场的梯度矢量。
The keystone is whether or not there is unique potential field in which the stresses (strains) or their increments are its gradient vectors.
结果表明,在扩展强度发挥面上,这几种材料的应力比与应变增量比之间仍具有线性关系。
The results indicate that the relationship between stress ratio and strain incremental ratio in these materials is still a linear relation on the extended moblized plane.
本文给出了计算钢压杆弹塑性稳定极限承载力的有限条塑性系数增量初应力法。
The paper presents a numerical method, named the Finite Strip Plasticity Coefficient Increment Initial Stress Method, to solve the elastoplastic stability ultimate loads of steel columns.
当材料的应力应变关系为弱硬化型时,应力比与应变增量比关系为两段斜率不同的直线;
When the stree strain relationship is the weak hardening, the relationship between stress ratio and strain incremental ratio shows the straight line with two different slopes.
采用位移和应力联合控制的增量法控制加载过程。
The loading procedure is controled by the incremental method which is jointly controled by the stresses and the displacements.
通过对岩石试样在加载前后测得的CT数作差值运算,可获得岩石试样在不同应力阶段的CT密度损伤增量。
Rock density damage increment with ct can be obtained by subtracting ct number of the undisturbed rock samples from that of the loaded rock samples.
基于材料的各向同性理论,根据应力—应变增量关系,建立了一个混凝土的三维本构关系模型。
The 3d constitutive relationship of concrete model is based on the isotropic approach of material with stress strain increment relationship.
用非线性弹性增量理论解释了变形和应力的关系并说明验算裂缝的方法。
The relation between deformation and stress was explained with nonlinear elastic increment theory, and the method of checking the cracking rupture was also given.
本文也指出了由于应变率敏感性所引起的内耗增量和过应力的类比性。
The analogy between internal friction increment and overstress due to strain-rate sensitivity is clarified.
标定试验结果表明,测点应变增量与残余应力间存在良好的线性关系。
The experiment results show that the measured additional strain keep a linear relationship with residual stress in the structure.
在这一理论框架下,增量的应力应变关系可以从所构造的能量函数中推导出来。
Under this framework, the stress-strain relations are derived from a pseudo-elastic strain-energy density.
文中指出,采用新的波浪设计载荷和腐蚀增量模型,热点应力法可以有效评估边舱折角点的疲劳强度,保证结构在寿命期内的安全。
This paper indicates that the hot stress method could be effective and safe for ship to adopt new wave load model and erosion model.
堆石体本身为弹塑性结构,应力和变形呈非线性关系,故确定计算方法采用增量有限元法;
Rockfill is elastoplastic itself and its stress-strain relationship is nonlinear. So the calculation method must be incremental FEM.
根据瑞利—李滋法,对先张法预应力吊车梁首次提出了预应力水平拉杆作用效应增量的计算公式。
Base on Rayleigh-Ritz method, a calculation formulation of action effect increment of a prestressed horizontal tension rod is firstly presented.
体外预应力筋的应变增量与结构整体变形的关系。
The relationship between the strain increment of external prestressed tendons and the whole structural deformation.
在预应力加固设计方面,钢吊车梁与混凝土吊车梁不同,由于其刚度较小、挠度较大,当吊车荷载作用上去后,会引起水平拉杆作用效应增量。
The steel crane girder's rigidity is smaller and its deflection is larger, when the crane moves, there will be force increment in the prestressed horizontal tie.
应用推荐