改进了原工艺流程及部分工艺规范。
Process flow and partial process specifications were improved.
拟制了磁极高速温挤压工艺规范。
The technological specification of the pole by the high speed warm extrusion was worked out.
介绍了该工艺的工艺流程及工艺规范。
给出了工艺流程及工艺规范。
调查分析了一些特殊钢厂的钢锭退火工艺规范。
The ingot annealing technology in some alloying steel plant have been investigated.
特别适用于新建的彩管生产线和调整工艺规范。
The process mentioned above is especially suitable for newly established CPT production line and technology standard adjustment.
本发明是关于废旧橡胶再生的脱硫设备和工艺规范。
This invention relates to desulphurization equipment and technological specification for regeneration of waste rubber.
介绍了不饱和聚酯树脂的粗化工艺流程及各工艺规范。
The roughening process of unsaturated polyester resins and its technological criterion were described.
所得结论对制定合理的锻造工艺规范具有一定的指导意义。
The conclusion is useful for reasonably working out quenching process of forging.
介绍了铝合金汽车窗框电解着色的工作原理和工艺规范等。
In this paper the working principles and process technology of the electrolytic colouration operation tor fhe automobile window frames made of aluminium alloy are presented.
介绍了一种电池钢壳滚镀镍的工艺流程和各主要工序的工艺规范。
The process flows and technical regimes of main sequence of barrel nickel plating for steel battery shell were introduced.
焊前的准备及制定合理可靠的焊接工艺规范可以基本保证焊接质量。
The preparation before welding process and the building appropriate and reliable welding process regulation can guarantee the weld quality fundamentally.
手工焊接通用工艺规范所用仪表的精度和技术指标应能满足测量要求。
The precision instruments used and technical indicators should be able to meet the measurement requirements.
本文介绍了ABS塑料化学镀镍的工艺流程及工艺规范，并详述了配方。
The process flow and technical norm were introduced. The process formulas were presented.
施焊过程中通过严格执行工艺规范，既保证了焊接质量又提高了焊接效率。
The welding procedure is strictly observed during tank welding process, thus the welding quality is guaranteed and the welding efficiency is increased.
按照热化学反应的一般理论并结合实验条件，对工艺规范的选择进行了讨论。
According to the general theorem of thermo-chemical reaction and experiment conditions, the selection of process norm is discussed.
本文重点阐述了钢质气瓶、铝合金气瓶的旋压成形工艺特点及其成形工艺规范。
Features and process criterion of spinning for steel and aluminum alloy gas bottle are mainly presented in this paper.
讨论了常温化学镀铜与着色处理的工艺规范，简单介绍了化学镀铜的影响因素。
Process specifications were discussed. The affecting factors on electroless Cu plating were briefly introduced.
发动机台架试验结果表明，优化干喷钢砂电喷涂工艺规范用于修复曲轴是可行的。
The bed test of diesel engine indicated that the optimized dry blasting steel grit and arc spraying technology was feasible to repairing crankshaft.
XZT循环蒸发脱气成套设备是根据物料蒸发的工艺规范要求设计的自动控制系统。
XZT complete sets of equipment degassing cycle evaporation evaporation process is based on specifications of materials designed for automatic control system.
分析了硅橡胶硫化过程的主要影响因数，设计了硅橡胶模具硫化工艺规范的优化系统。
Analyzed the main affecting factors of silicon rubber during the curing period, designed the optimizing system of curing criterion for the silicon rubber mold.
对带双侧异形凹槽铝合金壳体的材质选择、成形工艺以及热处理工艺规范进行了研究。
The material selection, the forming technology and the heat treatment rules of the aluminium alloy shell with two-sided special impression are studied.
粗糙度测试结果表明 ，采用优化的工艺规范处理表面 ，粗化质量符合国家标准要求。
The surface roughness obtained by this technology was approached to the Nation Standard of the Peoples Republic of China.
所以，制造中各工序严格执行工艺规范和标准要求，是提高焊接件质量和安全可靠性的保证。
Therefore, improvement of quality and reliability of the welding parts can be guaranteed by the strict implementation of the technology regulation and standard in each procedure of the manufacture.
而对于实心焊丝，在较大焊接工艺规范下，很容易出现焊缝表面的氧化起皱，焊缝成型不良。
Compared with cored wire, the solid wires have not so good welding usability showing oxidized and crinkled weld appearance as the welding parameters are greater.
介绍了堆焊工艺试验，在分析试验结果、计算堆焊层稀释率的基础上，选定了合理的堆焊工艺规范。
The surfacing process test is introduced. Based on the analysis of test results and the calculation of dilution rate of surfacing layer, the reasonable surfacing specification is selected.
开发了低压铸造加压工艺规范曲线系统，通过此系统可以方便快捷地绘出所需的加压工艺规范曲线。
A system that can protract add-pressure technical curve of low-pressure die casting has been programed, it may be used easily and quickly in the technics.
如果有分析仪器的话，一直净化设备，直到残留气体的氧含量或者低于或者满足工艺规范的纯度级别。
If analytical equipment is available, purge system until oxygen content of residual gas is either less than or meets the process specification impurity level.
如果有分析仪器的话，一直净化设备，直到残留气体的氧含量或者低于或者满足工艺规范的纯度级别。
If analytical equipment is available, purge system until oxygen content of residual gas is either less than or meets the process specification impurity level.
应用推荐