港口的拖轮调度过程是一类带特殊工艺约束的并行多机调度问题。
The port tugboat operation scheduling is a kind of parallel machines scheduling problem with special process constraint.
炼钢-连铸生产的浇次组合与排序是带有工艺约束的并行机流水车间调度问题。
The cast grouping and ordering problem of steelmaking continuous casting hot rolling (SM-CC) is a combinatorial optimization problem.
模型综合考虑了钢卷自身属性以及生产工艺约束条件等因素对钢卷组炉加热处理时间的影响。
The model thoroughly integrates the factors of affecting heating treatment time, such as characteristics of steel coils and production constraints.
基于模糊集理论与容差法思想 ，研究了具有模糊客户需求与多工艺约束的批量生产计划问题 ，采用遗传算法寻找优化的计划方案 。
The lot sizing problem with fuzzy customer demands and multi technological constraints was studied by taking advantage of the fuzzy set theory and the idea of tolerance.
基于多色集合理论，用数值围道矩阵描述了复杂PC B组装工艺流程中组装优化问题的设备资源约束和工艺约束，建立了PC B组装的优化约束模型。
Based on PS theory, numerical contour matrix was presented to describe the machine constraints and process constraints of job shop PCB assembly optimization problem and formulate the constraint model.
多目标多约束的模糊规划模型对解决多个工艺规划的优化选择是行之有效的。
The multi-objective fuzzy process planning model with many restraints is effective to solve optimal choice among many work programmes.
针对深亚微米工艺下版图设计中存在的时序收敛问题，提出了一种区域约束的版图设计方法。
A new method for layout design based on region constraints was presented to resolve the timing closure problem of physical design in deep sub-micron technology.
然后，利用装配知识判定子装配体的装配优先约束关系，提高由装配结构树生成装配工艺APS树的效率。
Then, the preferential constraint relation of sub-assembly is judged by matching assembly knowledge. The algorithm efficiency of generating assembly process APS-tree is improved.
三维几何约束求解对于装配设计、装配工艺规划和并行工程等多个领域的研究具有重要意义。
D geometric constraints solving has important significance for assembly modeling, assembly process planning and concurrent engineering.
电磁约束成型技术具有无模、电磁搅拌、强冷却等工艺特点。其凝固过程为一对流传热传质的动态过程。
Electromagnetic constrained forming technology features die-free, electromagnetic stirring and strong cooling, its solidification is a dynamic process of convective heat and mass transfer.
间歇过程单元的的先进控制目的是在设定的工艺轨线下，在不违反操作条件和约束的情况下完成对其快速、准确的跟踪。
The aim of advanced batch control strategies is to track the pre-set trajectory in a fast and exact way under the limit of operation condition and restriction.
轻烃回收系统庞大，工艺流程复杂，约束条件很多，从整个大系统的角度去求解优化问题存在很大困难。
From the view of whole large system, it was difficult to solve optimization problems for light hydrocarbon recovery system because of complex technics flow and constrained conditions.
本文推导了空气法乙烯氧化制环氧乙烷工艺的乙烯单耗数学模型及四个约束条件。
A model was established for ethylene consumption in air oxidation process of ethylene to ethylene oxide.
从空间约束、结构局限性、工艺局限性及材料局限性等方面展开对楼梯题目的回纳和整理。
From aspect and so on material limitation, craft limitation and structure limitation to induct and reorganize the stair's questions.
介绍和分析了高分子材料在基本氚工艺设备、惯性约束核聚变聚合物靶丸材料和氚个人防护中的研究和应用现状。
Study and application of the polymer materials of preventing tritium permeation were introduced and analysed in tritium technics and individual protection and ICF polymer target pill.
对于新产品报价，按照图纸预估需要的生产工艺步骤、工艺时间；努力使用约束理论的管理过程；
Make quotation for new product, including process step and process time. Will make efforts to use Theory of Constraint management process;
在此基础上，讨论了基于约束检验的可制造性评价内容和提出了结构工艺性评价和加工可行性评价的分层评价树；
On this basis, the content of manufacturability evaluation based on boundary checking is discussed and the layered evaluation tree of part configuration and machinability is proposed.
零件表面加工方案的选择是一个多因素约束的逻辑推理过程，需要大量工艺知识支持。
Selection of part shape machining process is a logic inference course restrained by many factors. A lot of machining knowledges are demanded.
研究了激光惯性约束聚变(ICF)实验中一种基础基准靶埋点靶的制备工艺过程。
The microspot target is one of the most important targets in the inertial confinement fusion (ICF) experiment, its fabrication technology is complicated.
针对序批式反应器污水处理工艺，提出一种以排水质量指标为约束条件，以能量消耗最小为目标的最优控制方案。
An optimal control scheme for sequencing batch reactor (SBR) wastewater treatment processes is proposed to achieve the wastewater effluent standards with minimal energy consumption.
提出工艺路线决策的主干约束匹配法。
The skeleton constraint matching approach of designing part machining route is proposed in this paper.
约束层和激光脉冲功率密度是影响激光冲击处理强化效果的重要工艺因素。
Overlay and laser power density are the main parameters influenced the strengthening effects.
在分析旋轮座的强度、稳定性、导轨比压、工艺力和关联尺寸的基础上建立了约束条件；
The optimization with two objectives is first used to design the spinning roller base of morden spinning machines, and the optimum method and the results are discussed.
首先在装配工艺信息的表达、零件装配顺序的染色体表示、装配中约束的分类方法方面进行了研究，并提出将不同类型的约束在遗传算法的不同阶段予以考虑。
Firstly, how to express the information about the process of assembly, and how to represent the sequence in which the parts of a product to be assembled by chromosomes were studied.
重点介绍了单约束、双约束模板混凝土施工，节点处理，屋面混凝土标高控制，混凝土养护等施工工艺。
Furthermore, the concrete construction with single and double constraint formwork, joint management, elevation control, and concrete maintenance are introduced in detail.
重点介绍了单约束、双约束模板混凝土施工，节点处理，屋面混凝土标高控制，混凝土养护等施工工艺。
Furthermore, the concrete construction with single and double constraint formwork, joint management, elevation control, and concrete maintenance are introduced in detail.
应用推荐