• 人们提出采用二极模稳定杆使二极模频率远离四极工作模。

    Dipole stabilizer rod was proposed to shift the dipole modes far from the working quadrupole mode.

    youdao

  • 文章还指出,就工作竞争而言,现在工作的空缺额还是和七年前的一模一样,因为移民人口在自身就业的同时也创造了新的就业机会。

    As far as competition for jobs was concerned, it pointed out that the number of vacancies is about the same now as it was seven years ago, since migrants create jobs as well as taking them.

    youdao

  • 但问题是,我现在仍然处在和几个月前一模一样的位置上:和以前一样的工作,同样没有找到时尚界的工作。

    But the thing is, I'm in exactly the same position I was in a few months ago: I still have the same job and have not managed to get a position in the fashion industry.

    youdao

  • 介绍了2005年诺贝尔物理学奖的获奖工作-用锁模飞秒激光光梳去测量光的频率。

    The work of the winners of the 2005 Nobel prize in physics is briefly reviewed. They measured the frequency of light with mode-locked laser comb.

    youdao

  • ∷恐龙合模剂使用方便、省时、省料、提高工作品质和效率。

    Puff Dino Mold-Gathering Agent is easy to use, time saving, material saving, enhances the working quality and efficiency.

    youdao

  • 将笔者以前关于近磁尾赤道面附近的漂移气球模不稳定性工作推广到非赤道区和存在非定常地向流的情形。

    Previous work on drift ballooning instability in the equatorial region has been extended to include a decelerated non stationary flow and to consider the off equator regions.

    youdao

  • 通过对插接护套复杂结构的工艺分析,确定了该类制件的注射模结构、工作过程,并对其设计特点进行了介绍。

    Through the technology analysis of the complicated constitution of plug jacket, the injection mould structure and the working process were determined. The design characteristic was introduced as well.

    youdao

  • 详细介绍了冰箱接水盒注塑件的成型工艺及注射模的结构及工作过程。

    The molding process of refrigerator water receiver, structure and work process of injection mold are introduced in detail.

    youdao

  • 同时也阐述了复合模工作过程及注意事项。

    In addition, both the working process of compound die and questions required attention are stated.

    youdao

  • 分析了发夹的工艺特性,介绍了发夹注射模的结构设计和工作原理。

    Analyzed the technology characteristics of the barrette, introduced the injection mold structure and work principle.

    youdao

  • 分析了在冲裁模工作中,废料上浮及不带料产生的原因,以及在理论、实际生产中的解决办法。

    The reasons of scrap rising and missing material during the working process of punching die are analyzed, and the solving methods in theory and actual manufacture are provided.

    youdao

  • 本次设计阐述了冲压倒装复合模的结构设计以及工作过程。

    The design describes the structure of compound die stamping flip-chip design and working process.

    youdao

  • 讨论了冲裁凹模工作部分的结构组成。

    The structure and composition of work area of blanking lower die were discussed in this paper.

    youdao

  • 分析了橡胶缓冲套零件的结构及工艺要求,介绍了橡胶缓冲套注射模的结构特点及工作过程。

    The structure and process requirements of rubber cushion cover parts are analyzed, as well as the structural character and working process of rubber cushion cover injection mold are introduced.

    youdao

  • 介绍了复合模的结构、特点及工作过程。

    The working course, characteristic and the structure of the compound mould are introduced.

    youdao

  • 如果那时你的生活和现在一模一样,你会觉得满意吗?你对你的爱人、工作以及健康状况满意吗?想象一下你理想中的生活状态。

    Are you satisfied with your life if it is to continue exactly as it currently is? Are you content with your relationships, work, health? Picture the ideal life you could be living.

    youdao

  • 介绍了在曲柄压力机上切边冲孔的复合模结构设计、工作原理及装配和调试要求等。

    This paper described work principle and structure design of side cut punch composite mold and assembly testing requirements using the crank press machine.

    youdao

  • 通过对斜顶杆工作过程的逆向思考,采用拔杆为后模滑块提供动力。

    Through reverse thinking of working principle of inclined push rod, this mold adopts button pole to offer power to rear mold slide block.

    youdao

  • 介绍了等静压瓷砖模具的工作原理、上模芯的结构形式和优化设计的方法。

    This paper introduced the working principles of ceramic tile die with static-pressure, structure type of upper punch and method of optimal design.

    youdao

  • 在工作过程中,冲头与凹模切口的半径定位,确保形成所需的圆形,而不至于在圆边产生“缺口”。

    The radius of the punch and die cutting edges is laid out to produce the desired circular shape without nicking into the circle as the work proceeds.

    youdao

  • 这一工作对煤粉燃烧过程中辐射热交换的测量和数学模化都有重要的实际意义。

    This work is of practical importance in measuring and modelling the radiative heat transfer in pulverised-coal-fired systems.

    youdao

  • 介绍了复合模的结构特点及工作过程,分析了齐边的工艺过程。

    Die structure characteristics and working procedure were introduced and edging process was analyzed.

    youdao

  • 实验得到了基模工作时大于30%的光光转换效率。

    More than 30% optical to optical conversion efficiency in the fundamental mode operation has been achieved experimentally.

    youdao

  • 分析了耦合效率与光源激发的光模场、光纤结构及光纤头部形状、耦合工作参数等因素的关系。

    The relation between coupling efficiency and mode field stimulated by SLD, fiber structures, shape of fiber butt and coupling operation parameters was analyzed.

    youdao

  • 介绍了在通用冲床上使用的漏斗式自动送料弯曲模的结构形式、工作过程和设计要点。

    The structure, operating principle and main design points of the hopper-type automatic-feeding bending die used on a general stamping machine are stated.

    youdao

  • 分析了数码相机后盖塑料件的工艺特点,介绍了数码相机后盖注射模结构设计和工作过程。

    The technological characteristics of back cap of digital camera were analyzed, and the structural design and operating process of the injection mould were introduced.

    youdao

  • 结论:应用高亮度、高分辨率显示器作为图像获取工作站显示器可显著降低体模照射剂量。

    Conclusion The irradiation dose can be reduced significantly using high resolution and brightness monitor as image acquisition workstation monitor.

    youdao

  • 通过对转角拉扣五金零件的工艺分析,设计了一款切折弯曲落料级进模,同时对模具工作过程作了介绍。

    Through analyzing the forming process of the comer pull buckle part, designed a cutting-bending-blanking progressive die. And introduced die working principle.

    youdao

  • 介绍了注胶桶的注胶嘴注射模的设计制造方法,并阐述了该模具的工作过程。

    Introduced design and manufacture methods of injection mold of injection nozzles for plastic buckets, described the mold working process.

    youdao

  • 介绍了注胶桶的注胶嘴注射模的设计制造方法,并阐述了该模具的工作过程。

    Introduced design and manufacture methods of injection mold of injection nozzles for plastic buckets, described the mold working process.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定