• 滑动模块包括一对导杆和导向板。

    The sliding module includes a pair of guide rods and a guide plate.

    youdao

  • 移动导杆机构是平面四杆机构的一种变形形式。

    Moving leader mechanism is a special style of the planar four-bar mechanism.

    youdao

  • 导杆沿第二壳体的滑动方向分隔开地安装在第二壳体的背面上。

    The guide rods are mounted spaced apart on the rear face of the second housing along a sliding direction of the second housing.

    youdao

  • 设计校核皮带轮传动、蜗轮蜗杆传动、圆筒、轴承座、导杆等。

    Pulley gear, worm gears, cylinder, bearing base and quadrate pole etc were designed and checked.

    youdao

  • 采用四导杆导向,刚性好,导向精度高。节省操作时间,合模平稳。

    It adopts four guide rods with a high accuracy in guiding, which saves working time and helps the upper and lower moulds matched steadily.

    youdao

  • 磨盖板机中的盖板传动装置由一个曲柄滑块机构和两个转动导杆机构等组合而成。

    The device for driving flat in the flat grinding machine is composed essentially of a slider-crank mechanism and two rotating guide mechanisms.

    youdao

  • 系列气动执行器设计基于对立的机架和小齿轮原理,利用活塞导杆来保证部件对齐。

    The Series 39 Pneumatic Actuator design is based on the opposed rack-and-pinion principle utilizing piston guide rods to guarantee part alignment.

    youdao

  • 本发明涉及一种硅钢高温退火环形加热炉中找正锁紧孔与锁紧导杆的同心度的方法。

    The invention relates to a method for aligning the concentricity of a locking hole and a locking guide rod in a silicon steel high-temperature annealing ring-shaped heating furnace.

    youdao

  • 本文介绍了双万向节——齿轮组合机构与三滑块摆动导杆机构之组合机构的运动分析、优化设计。

    This paper presents the kinematic analysis and the optimal design on the combined mechanism of double universal joints gears and the oscillating guided bar mechanism with three slides.

    youdao

  • 定期检查吸入、呼出阀盘动作是否灵活,导杆及阀盘接触密封面有无损坏,如有损坏应立即更换。

    Regularly check whether actions of inhalation, exhalation discs are flexible, and the sealing contact surface of leader and disc is damaged, if so, should be replaced immediately.

    youdao

  • 为了求解曲柄导杆机构的运动学规律,运用矢量法进行了分析,建立了曲柄导杆机构的运动学数学模型。

    Using the vector method to analyse and solve kinematics of the crank-pilot bar mechanism, thus established the kinematical mathematic model of the crank-pilot bar mechanism.

    youdao

  • 柴油机横臂导杆折断会带来严重后果,经分析认为其折断原因有:同名气门杆顶部不齐;调整螺母松动,调整螺钉窜动;气门导管与气门杆间隙量大。

    The reasons are: different top heights of valve rods having the same names; loose adjustment nuts or adjustment screws moving; and big clearances between valve guides and valve rods.

    youdao

  • 并不是所有的挠性剑杆都需要装在筘座上的导剑片,越来越多的织机生产厂家在钢筘外的机架上安装托架以引导剑杆带。

    Not all flexible rapiers require guides mounted in the sley. More and more rapier loom makers are directing the flexible rapier band through a fixed housing on the loom frame just outside the reed.

    youdao

  • 转子装在l形杆上,l形杆固定在水平轴上。在水平轴上还装有短臂,钢筘和导梭片就装在短臂上。

    The rollers are carried by an L - shaped lever, fixed to a horizontal shaft, which also carries short arms to which the reed and gripper guides are fixed.

    youdao

  • 在闸门井导井被岩体完全封堵的情况下,为确保后期刷帮及衬砌安全,采用锚杆和砼结合对闸门井进行锁口。

    In the case that the pilot bore of the lock gate shaft was fully blocked by the rock mass, anchors have been combined with concrete to ensure the safety of subsequent side clearing and lining.

    youdao

  • 此刀头主要由导光管、聚焦透镜、可伸缩接触杆以及手柄组成。

    The knife bit mainly is composed of a light pipe, a focusing lens, a telescopic contact lever and a handle.

    youdao

  • 由于增加了导套,延长了镗杆的支撑长度,大大增强了镗杆的刚度。

    The supporting length of the boring bar is prolonged and the hardness of the boring bar is greatly increased by the guide sleeve.

    youdao

  • 由于增加了导套,延长了镗杆的支撑长度,大大增强了镗杆的刚度。

    The supporting length of the boring bar is prolonged and the hardness of the boring bar is greatly increased by the guide sleeve.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定