• 演示子板包含温度和光传感器、一个三轴加速计、8 个三色 LED以及两个按钮开关。

    The demonstration daughterboard contains temperature and light sensors, a three-axis accelerometer, eight tricolour LEDs, and two pushbutton switches.

    youdao

  • 必要时,还可以通过5 个通用I/O插脚和4 个高电流输出插脚增加更多的子板。

    Additional daughterboards can be added if necessary through five general-purpose I/O pins and four high-current output pins.

    youdao

  • 汽车碰撞时左侧的翼子板撞坏了。

    The nearside wing was damaged in the collision.

    youdao

  • 一种车身,包括翼子板和前灯组件。

    A vehicle body includes a fender and a headlamp assembly.

    youdao

  • 由于车门区域仍装有防溅护板,请小心地拆下翼子板。

    Remove the wing carefully since the splash guard for the door area is still fitted.

    youdao

  • 提出了一种摄像机标定方法并应用于某轿车翼子板的非接触检测。

    A camera calibration method was put forward and applied to non-contacting detection for the front fender of a car.

    youdao

  • 对卡车翼子板滚塑成型原料、工艺条件、制件和模具设计进行了研究。

    For rotational molded truck fender, raw material, processing conditions and the design of part and mold were studied.

    youdao

  • 将该方法用于某汽车翼子板成形模拟,并与增量法模拟结果及实验结果进行了对比。

    This method was applied to simulate an automobile front fender, and its results were compared with the results of experiment and simulation by incremental method.

    youdao

  • 基于此,进一步分析了模具几何参数和工艺参数对回弹量的影响,为翼子板模具设计提供理论依据。

    Based on this, the influence of the die geometry and process parameters on springback was further analyzed, which provides a theoretical basis for the front fender dies design.

    youdao

  • 根据MPC860T的特点,我们把模块化路由器的设计分为主板设计、插槽设计、通信子板设计三个部分。

    We divide the whole design into three parts based on the characters of MPC860T: the main board design, the self-define slot design and the communication board design.

    youdao

  • 介绍了板料成型CAE软件CADEM主要理论,并以汽车外覆盖件翼子板的拉延模具开发为例,阐明了CAE技术在模具开发中所起的重要作用。

    The core theory of sheet metal forming simulation software CADEM is introduced. Taking the development of drawing die for front fender as an example, the role of CAE technology is emphasized.

    youdao

  • 火焰一下子窜到了天花板。

    Flames sprang up to the ceiling.

    youdao

  • 日本板硝子株式会社和其他公司的子公司都面临着同样的问题。

    Subsidiaries of Nippon Sheet Glass and others have also faced unrest.

    youdao

  • SAS1064是子卡,SAS1064E是这个blade的板上控制器。

    SAS1064 is the daughter card, SAS1064E the onboard controller for this blade.

    youdao

  • 至于背景中白色写字板上的那些公式,已经成为每周新的一集的主要部分,Saltzberg提供了描述磁单极子的经典图像和方程。

    As for the white board equations in the background that have become a staple of each weekly episode, Saltzberg provided classic diagrams and equations describing magnetic monopoles.

    youdao

  • 为了防止新鲜的莓子在冰箱里冻完后变成糊状,应该把它们彻底洗净,拍干,放在烤板上。

    To prevent fresh berries from turning to mush in the freezer, wash the fruit thoroughly, pat it dry, and place on a cookie sheet.

    youdao

  • 天花板上的灯闪着一串火花碎裂,酒馆里一下子暗了许多。

    On the ceiling, a light fixture shattered in a shower of hot sparks, plunging much of the bar into darkness.

    youdao

  • 过高的湿度会降低印制电路板和测试连接绝缘子的绝缘电阻。

    Excess humidity can reduce insulation resistance on PC boards and in test connection insulators.

    youdao

  • 板状振子型基站天线是一种现代移动通信中广泛使用的基站天线。

    The dipole antenna array with trough reflector is widely applied to base stations for mobile communications.

    youdao

  • 本文对介质板上的直线振子天线作了理论和实验研究。

    The problem of a linear dipole antenna mounted on a dielectric slab is investigated theoretically and experimentally.

    youdao

  • 本文应用加权余量法中的子域法和配点法,求出了均匀圆板在径向和横向均布荷裁作用下的极限荷载的近似解。

    An approximate solution on ultimate load of a circular plate under radial and lateral loads is derived from equations by subdomain Weighted Residual Method (WRM) and point by point WRM.

    youdao

  • 研制一套由车载齿槽板、沿轨道分布的检测子块及一台上位处理器组成的轨道车辆地面式定位测速系统。

    The system consists of a tooth-and-slots board, detection submodules distributed along the track and a central processor.

    youdao

  • 子块以PIC16C54为核心,通过测定齿槽板的挡光脉冲来计算行车速度及方向;

    The submodule adopts a PIC16C54 as core processor and calculates the moving speed and direction by detecting the shading pulses of the toothandslots board.

    youdao

  • 脱层区域假定为椭圆形状,本文研究了在双轴载荷作用下对称正交铺设层板脱层屈曲的临界载荷,脱层厚度、半轴比、子层角以及载荷比对临界载荷的影响均进行了研究。

    The delamination is assumed to be elliptical in shape. In this paper the critical load of delamination buckling for a symmetric cross-ply laminate acted on by biaxial load is investigated.

    youdao

  • 锁钩板、铰链和弹簧限位凸子均设置在装配弯折边的内侧面上。

    The locking plate, the clasps and an elastic position-limiting convex are all provided on the inside of the curved line.

    youdao

  • 锁钩板、铰链和弹簧限位凸子均设置在装配弯折边的内侧面上。

    The locking plate, the clasps and an elastic position-limiting convex are all provided on the inside of the curved line.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定